Opens in a new tab

0154001.DRT

1A very fast-acting SMD fuse in OMNI-BLOK holder, 125VAC/VDC, 9.73×5.03mm, tape & reel

9172

Effective Inventory

Image for reference only

Manufacturer Part:

0154001.DRT

Package:

OMNI-BLOK 154 (9.73 x 5.03 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 0154001.DRT from Littelfuse is a 1 A very fast-acting surface-mount fuse from the 154 Series OMNI-BLOK fuse and holder assembly. Designed for tape-and-reel automated assembly, it combines a Nano2 surface-mount fuse with a holder in a single 9.73 x 5.03 mm package, enabling easy fuse replacement without soldering the PCB. Rated at 125 VAC/125 VDC with a 50 A breaking capacity, it provides overcurrent protection for a wide range of electronic circuits.

Key Specifications

Current Rating 1 A
Opening Characteristic Very Fast-Acting (FF)
Voltage Rating 125 VAC / 125 VDC
Breaking Capacity 50 A (AC and DC)
I2t (Melting) 0.6029 A²s
Cold Resistance Per datasheet
Operating Temperature Wide range per datasheet
Package OMNI-BLOK 154 (9.73 x 5.03 mm)
Packaging Tape & Reel (DRT suffix)
Approvals UL, CSA

Features

  • Integrated fuse and holder — single-step PCB installation
  • Replaceable fuse without soldering — protects PCB from rework heat
  • Very fast-acting (FF) opening characteristic for sensitive semiconductor protection
  • Tape-and-reel packaging for automated SMT pick-and-place assembly
  • UL and CSA approved for safety compliance
  • Compact 9.73 x 5.03 mm footprint saves board space

Applications

  • Power supply output overcurrent protection
  • USB port and hub current limiting
  • Industrial control circuit board protection
  • Telecom equipment line protection
  • Consumer electronics internal power rail fusing
Product Introduction: 0154001.DRT Product Introduction

The 0154001.DRT from Littelfuse is a 1 A very fast-acting surface-mount fuse integrated into the 154 Series OMNI-BLOK fuse and holder assembly. The OMNI-BLOK design combines a Nano2 SMD fuse with a holder in a single package, allowing the complete assembly to be installed on the PCB in one step during SMT assembly. When the fuse blows, only the internal fuse element needs replacement — the holder remains soldered to the PCB, eliminating the need for desoldering and protecting the board from thermal damage during replacement. The very fast-acting (FF) characteristic provides rapid opening for sensitive semiconductor protection. The device is rated at 125 VAC and 125 VDC with a 50 A interrupting rating, and is UL and CSA approved.

Working Principle: 0154001.DRT Working Principle

The 0154001.DRT operates as a sacrificial overcurrent protection device: (1) Normal Operation — at currents up to the 1 A rated value, the fuse element maintains low resistance and negligible voltage drop, allowing normal circuit operation; (2) Overcurrent Event — when current exceeds the rated value, the fuse element heats due to I²R power dissipation; (3) Very Fast-Acting Response — the FF characteristic means the fuse opens very quickly at moderate overloads (typically within seconds at 200% rated current), protecting sensitive downstream semiconductors from thermal damage; (4) Arc Interruption — after the element melts, the resulting arc is extinguished by the filler material within the fuse body, interrupting the circuit at up to 50 A fault current; (5) Replacement — the blown fuse can be removed from the holder and replaced with a new Nano2 fuse without desoldering from the PCB.

Pin Description: 0154001.DRT Pin Definition and Functions
Terminal Function
Pad 1 Input terminal — connect to power source side
Pad 2 Output terminal — connect to load side
Application Scenarios: In which products and applications is 0154001.DRT used
  • USB 2.0 hub port protection limiting fault current to protect the host controller IC from overcurrent
  • 5 V / 3.3 V power supply output rail fusing for sensitive digital logic board protection
  • Industrial PLC I/O module internal power distribution with field-replaceable OMNI-BLOK fuse
  • Telecom line card secondary protection fuse with very fast-acting response for semiconductor safety
  • Consumer electronics battery charger circuit overcurrent protection with easy end-user fuse replacement
Alternative Models: What chips are recommended as replacements for 0154001.DRT
Model Manufacturer Key Difference
0154001.DRL Littelfuse Same fuse with indicating feature
0154001.0T Littelfuse 1 A time-lag (Slo-Blo) version for inductive loads
0154002.DRT Littelfuse 2 A version, same holder
453001.0 Littelfuse Nano2 fuse only (without holder)
0154001.5DRT Littelfuse 1.5 A very fast-acting OMNI-BLOK

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1