Opens in a new tab

10M02SCU169C8G

MAX 10 FPGA, 2000 LE, 108Kb RAM, instant-on flash, single 3.3V supply, 169-pin BGA

6012

Effective Inventory

Image for reference only

Manufacturer Part:

10M02SCU169C8G

Package:

169-pin FineLine BGA (11 x 11 mm, 0.8mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 10M02SCU169C8G from Intel (formerly Altera) is a member of the MAX 10 FPGA family, a low-cost, single-supply, instant-on FPGA based on non-volatile flash technology. This device features 2,000 logic elements (LEs), 108 Kb of embedded memory, and operates from a single 3.3V supply without requiring an external configuration device. Housed in a 169-pin FineLine BGA package, it supports features including dual-boot configuration, on-chip flash for user data, and a built-in oscillator.

Key Specifications

Logic Elements 2,000
Embedded Memory 108 Kb M9K blocks
Maximum User I/O 84
PLLs 1
Core Voltage 1.2V (internal regulator)
I/O Voltage 3.3V (single supply operation)
Configuration On-chip flash (instant-on)
Operating Temperature 0 to 70°C (C-speed grade)
Package 169-pin FineLine BGA (11x11mm)

Features

  • Non-volatile flash-based FPGA – instant-on, no external configuration device needed
  • Single 3.3V supply operation with on-chip voltage regulator
  • Dual-boot configuration support for firmware updates
  • On-chip user flash memory for non-volatile data storage
  • 1 PLL for clock management and frequency synthesis
  • 10-bit 1Msps ADC available in select variants
  • Supports Intel Quartus Prime design software

Applications

  • Glue logic and CPLD replacement in system designs
  • IO expansion and protocol bridging
  • Industrial control and motor interface logic
  • Automotive body controller applications
  • Low-cost FPGA prototyping and education
Product Introduction: 10M02SCU169C8G Product Introduction

The 10M02SCU169C8G is the smallest member of Intel’s MAX 10 FPGA family, offering 2,000 logic elements in a non-volatile, instant-on architecture. Unlike traditional SRAM-based FPGAs that require external configuration devices, the MAX 10 integrates on-chip flash memory for configuration storage, enabling power-on instant-on operation within milliseconds. The single 3.3V supply simplifies PCB design by eliminating the need for multiple voltage rails. With 108 Kb of embedded memory, 1 PLL, and up to 84 user I/Os, this device bridges the gap between CPLDs and larger FPGAs, offering reconfigurable logic at a competitive price point.

Working Principle: 10M02SCU169C8G Working Principle

The MAX 10 FPGA uses a non-volatile flash-based configuration architecture. At power-up, the on-chip flash memory automatically loads the configuration bitstream into the SRAM-based logic array, enabling instant-on operation without an external configuration controller. The core logic fabric consists of Logic Array Blocks (LABs) containing 10 Logic Elements (LEs) each, where each LE contains a 4-input look-up table (LUT), a register, and carry/chain logic. The embedded M9K memory blocks can be configured as RAM, ROM, or FIFO buffers. A single PLL generates internal clock signals from an external reference. The on-chip voltage regulator converts the 3.3V I/O supply to the 1.2V core voltage, simplifying the power supply design.

Pin Description: 10M02SCU169C8G Pin Definition and Functions
Pin Group Count Type Function
VCCIO 8 Power I/O bank supply (3.3V)
VCCINT 4 Power Core supply (3.3V input, internal regulation to 1.2V)
GND 12 Ground Ground reference
I/O Pins 84 I/O General-purpose user I/O
CLK 4 Input Dedicated clock input pins
JTAG 4 I/O TCK, TMS, TDI, TDO for JTAG programming
CONF_DONE 1 I/O Configuration status
INIT_DONE 1 I/O Initialization status
Application Scenarios: In which products and applications is 10M02SCU169C8G used
  • CPLD replacement for glue logic and address decoding in embedded systems
  • IO expansion and protocol bridging between different bus standards
  • Motor control and sensor interface logic in industrial automation
  • Automotive body electronics requiring instant-on and low power standby
  • Low-cost FPGA prototyping and educational development boards
Alternative Models: What chips are recommended as replacements for 10M02SCU169C8G
Manufacturer Part Number Package Notes
Intel 10M04SCU169C8G 169-BGA 4000 LE, same package, pin-compatible upgrade
Intel 10M02SCU169I7G 169-BGA Industrial temp (-40 to 100°C)
Lattice LCMXO2-1200HC-4TG100C TQFP-100 1280 LUT, instant-on, 3.3V
Microchip ICE40LP1K-CM36 caBGA-36 1280 LUT, ultra-small package
Gowin GW1N-4 QFN-48 3328 LUT, flash-based, low cost

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1