Opens in a new tab

10M08SAM153I7G

MAX 10 FPGA, 8000 LEs, 153 I/O, 387Kbit RAM, on-chip Flash, 256-EQFP industrial

11502

Effective Inventory

Image for reference only

Manufacturer Part:

10M08SAM153I7G

Package:

256-EQFP (22x22mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 10M08SAM153I7G from Intel is a MAX 10 FPGA with 8000 logic elements, 153 I/O pins, and 387Kbit embedded RAM in a 256-EQFP (22x22mm) package. With industrial-grade temperature range (-40°C to +100°C) and single 3.3V I/O supply, it provides instant-on CPLD-like functionality with FPGA density.

Key Specifications

Logic Elements 8000
LABs/CLBs 500
Total RAM 387,072 bits
I/O Pins 153
Core Voltage 1.2V
I/O Supply 2.85V – 3.465V
Speed Grade -I7 (industrial)
Temperature Range -40°C to +100°C
Package 256-EQFP (22x22mm)
MSL 3 (168 hours)

Features

  • Instant-on configuration from on-chip Flash — no external config device
  • 8000 logic elements with dual-purpose I/O pins
  • 387Kbit M9K embedded memory blocks
  • Single 3.3V I/O supply simplifies board design
  • Internal oscillator and ADC (10-bit, 1Msps) in select variants
  • In-system programming (JTAG) and dual-boot configuration support

Applications

  • CPLD replacement with higher density and on-chip Flash
  • Industrial control and I/O expansion
  • Bus bridging and protocol conversion
  • Motor control and power electronics logic
Product Introduction: 10M08SAM153I7G Product Introduction

The 10M08SAM153I7G from Intel is a MAX 10 FPGA with 8000 logic elements and 153 I/O pins in a 256-EQFP (22x22mm) package. The MAX 10 family uniquely integrates configuration Flash on-chip, providing instant-on operation without external configuration devices — a key advantage over SRAM-based FPGAs. With 387Kbit of embedded M9K memory, industrial-grade temperature support (-40°C to +100°C), and single 3.3V I/O supply, it bridges the gap between CPLDs and FPGAs for applications requiring moderate logic density with instant-on reliability.

Working Principle: 10M08SAM153I7G Working Principle

The 10M08SAM153I7G uses Intel’s MAX 10 architecture based on a 2D array of Logic Array Blocks (LABs), each containing 10 Logic Elements (LEs). Each LE consists of a 4-input look-up table (LUT), a programmable register, and carry/interconnect logic. The M9K embedded memory blocks can be configured as single-port or dual-port RAM, ROM, FIFO, or shift registers. The on-chip Flash stores the configuration bitstream, which is loaded into the SRAM configuration cells during power-up in approximately 10ms (instant-on). The dual-boot feature stores two configuration images, automatically falling back to the backup if the primary image is corrupted. JTAG interface supports in-system programming and boundary-scan testing.

Pin Description: 10M08SAM153I7G Pin Definition and Functions
Pin Group Count Description
I/O Bank 1-8 153 General-purpose I/O (3.3V LVCMOS/LVTTL)
VCCIO 8 Per-bank I/O supply (2.85-3.465V)
VCCINT 4 Core voltage (1.2V, internal LDO)
VCCA 2 Analog supply (ADC, if available)
GND 16 Ground
TCK/TMS/TDI/TDO 4 JTAG programming interface
CONF_DONE/nCONFIG 2 Configuration control
Application Scenarios: In which products and applications is 10M08SAM153I7G used
  • CPLD replacement for I/O expansion and glue logic consolidation
  • Industrial control bus bridging and protocol conversion
  • Motor control PWM generation and fault logic
  • Automotive and industrial display controller logic
Alternative Models: What chips are recommended as replacements for 10M08SAM153I7G
Model Manufacturer LEs I/O On-chip Flash
10M16SAU324I7G Intel 16000 250 Yes
10M04SCU169I7G Intel 4000 130 Yes
EPM2210F324I5 Intel 2210 250 Yes (CPLD)
LFXP2-5E-5TN144I Lattice 5000 108 Yes (XP2)

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1