Opens in a new tab

Home » Integrated Circuits ICs » 22LV10AIP

22LV10AIP

3.3V E2CMOS PLD, 22 inputs/10 outputs, 10ns delay, 24-DIP, 128 product terms, industrial grade

7595

Effective Inventory

Image for reference only

Manufacturer Part:

22LV10AIP

Package:

24-DIP

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 22LV10AIP is a low-voltage high-performance E2CMOS PLD (Programmable Logic Device) from the 22V10 family, operating at 3.3V supply voltage. Manufactured using advanced EEPROM technology, this device offers 10 output macrocells with programmable output polarity and feedback configuration. The 22LV10 series provides 22 inputs and 10 outputs with 128 product terms per logic array block, making it ideal for a wide range of combinatorial and sequential logic applications in low-voltage systems.

Key Specifications

Type EEPROM-based PLD (PAL/GAL architecture)
Supply Voltage (VCC) 3.0V ~ 3.6V (3.3V nominal)
Number of Inputs 22 (including feedback)
Number of Outputs 10 (I/O macrocells)
Product Terms 128 total (variable per output)
Propagation Delay (tPD) 10 ns (max, -10 speed grade)
Operating Frequency 100 MHz max
I/O Type LVCMOS 3.3V, 5V tolerant inputs
Package 24-Pin Plastic DIP (through-hole)
Operating Temperature -40°C ~ +85°C (Industrial)

Features

  • Low-voltage 3.3V operation
  • 5V tolerant inputs for mixed-voltage systems
  • 10 programmable macrocells with individual output config
  • Variable product term allocation (8-16 per output)
  • Programmable output polarity
  • Registered or combinatorial output mode
  • Electrically erasable and reprogrammable (E2)
  • 10,000 program/erase cycles minimum
  • 20 years data retention
  • RoHS compliant and halogen-free

Applications

  • 3.3V system logic integration
  • Address decoding and bus interface
  • State machine and control logic
  • Memory control and timing circuits
  • DSP and microprocessor glue logic
  • Programmable interrupt controllers
  • Low-power portable equipment
  • Telecom and networking equipment
Product Introduction: 22LV10AIP Product Introduction

The 22LV10AIP is a 3.3V low-voltage high-performance E2CMOS programmable logic device (PLD) based on the industry-standard 22V10 architecture. Operating from a 3.0V to 3.6V supply, this device is designed for 3.3V system applications while maintaining 5V tolerance on its input pins, allowing seamless integration in mixed-voltage designs. The device features 22 inputs and 10 I/O macrocells, with 128 product terms distributed variably across the outputs (from 8 to 16 product terms per output). Each output macrocell can be individually configured as registered or combinatorial, with programmable output polarity and configurable feedback paths. The 10ns propagation delay makes it suitable for high-speed logic applications. Housed in a 24-pin through-hole DIP package and rated for industrial temperature range (-40°C to +85°C), the 22LV10AIP offers reliable performance in harsh environments. The electrically erasable (E2) technology allows the device to be reprogrammed at least 10,000 times with 20 years of data retention. This device is ideal for address decoding, bus interfacing, state machines, memory control, and general-purpose glue logic in 3.3V digital systems.

Working Principle: 22LV10AIP Working Principle

The 22LV10AIP operates as a programmable AND array feeding a fixed OR array (PAL architecture) with configurable output macrocells, implemented using EEPROM (electrically erasable PROM) technology. The device contains two main functional blocks: the programmable AND logic array and the output macrocell array. In the AND array, all 22 inputs (including feedback from outputs) are available as both true and complemented signals. Each product term line can be programmed to connect to any combination of input signals, using EEPROM cells that are electrically programmed and erased. The 128 product terms are distributed among the 10 output macrocells, with the allocation varying — outputs near the center of the chip receive more product terms (up to 16) than those at the edges (minimum 8). Each output macrocell contains an OR gate that sums the assigned product terms, followed by a configurable flip-flop (D-type) and a polarity multiplexer. The macrocell can be programmed for combinatorial mode (bypass register) or registered mode (use flip-flop), with active-high or active-low output polarity. The flip-flop’s clock is global (driven by pin 1), and the output enable is controlled by a dedicated product term. The feedback path routes either the registered or combinatorial output signal back to the AND array, enabling sequential logic designs such as state machines and counters. During programming, EEPROM cells are set to define the product term connections, macrocell configuration, and output polarity — all electrically erasable and reprogrammable.

Pin Description: 22LV10AIP Pin Definition and Functions
Pin Number Pin Name Type Description
1 CLK Input Clock input (for registered outputs)
2-11 I0-I9 Input Input pins 0 through 9
13 OE Input Output Enable (global, active low)
14-23 IO0-IO9 I/O I/O macrocell outputs 0 through 9
12 GND Power Ground (0V)
24 VCC Power Positive supply (3.3V)
Application Scenarios: In which products and applications is 22LV10AIP used
  • 3.3V digital system glue logic
  • Memory address decoding circuits
  • Microprocessor bus interface logic
  • Programmable state machines
  • DSP peripheral control and timing
  • Interrupt controller logic
  • Telecom line card interface
  • Industrial control systems
Alternative Models: What chips are recommended as replacements for 22LV10AIP
Manufacturer Part Number Description
Lattice GAL22LV10D 22V10 3.3V PLD, 24-SOP
Microchip ATF22LV10C 22V10 3.3V PLD, 10ns, industrial
Cypress CY7C331 3.3V PLD, 22V10 compatible
ATMEL ATF22V10C 5V 22V10 PLD, 24-pin DIP

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1