Opens in a new tab

23LC1024-I/ST

1Mbit SPI SRAM, 20MHz, Unlimited R/W, SQI, TSSOP-8

5678

Effective Inventory

Image for reference only

Manufacturer Part:

23LC1024-I/ST

Package:

TSSOP-8 (4.4 x 3.0 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 23LC1024-I/ST from Microchip Technology is a 1Mbit SPI serial SRAM with 20MHz clock speed, SDI/SQI interface options, and unlimited read/write endurance in a TSSOP-8 package.

Key Specifications

Type 1Mbit SPI Serial SRAM
Density 1 Mbit (128 Kbyte)
Organization 131,072 x 8 bits
Interface SPI (SDI) / Quad SPI (SQI)
Max Clock Speed 20 MHz (SPI); 104 Mbps (SQI)
Read/Write Endurance Unlimited
Access Time 25 ns (SPI sequential)
Active Current 5 mA (typical @ 20MHz)
Standby Current 5 uA (typical)
Supply Voltage 2.5V to 5.5V
Package TSSOP-8 (4.4 x 3.0 mm)
Operating Temperature -40C to +85C (I grade)

Features

  • 1Mbit (128KB) SPI serial SRAM
  • Unlimited read/write endurance (no wear)
  • SPI (SDI) and Quad SPI (SQI) modes
  • 20 MHz SPI clock speed
  • Sequential and page-mode access
  • Low standby current: 5 uA

Applications

  • MCU external RAM expansion
  • Audio/video buffering
  • Data logging and circular buffers
  • Graphics frame buffers
Product Introduction: 23LC1024-I/ST Product Introduction

The 23LC1024-I/ST from Microchip Technology is a 1Mbit (128 Kbyte) serial SRAM with SPI and Quad SPI (SQI) interfaces in a TSSOP-8 package. Unlike flash memory or EEPROM, SRAM provides unlimited read/write endurance with no wear mechanism, making it ideal for frequently updated data buffers and working memory. The device supports three interface modes: standard SPI (SDI, single data in), and Quad SPI (SQI, four data lines) for 4x throughput. The 20 MHz SPI clock provides up to 20 Mbit/s throughput in SDI mode, while SQI mode achieves 80 Mbit/s effective data rate at 20 MHz clock. The sequential read/write mode allows continuous access to the entire memory array with a single address, ideal for circular buffers and DMA transfers. The 2.5V to 5.5V supply range supports both 3.3V and 5V systems. The 5 uA standby current is suitable for battery-backed applications.

Working Principle: 23LC1024-I/ST Working Principle

The 23LC1024 uses a 6-transistor SRAM cell array organized as 131,072 x 8 bits. The memory is accessed through an SPI-compatible serial interface using standard command opcodes: READ (0x03), WRITE (0x02), EDIO (0x3B) for SDI mode, and EQIO (0x38) for SQI mode. In SPI mode, the master sends an 8-bit opcode followed by a 24-bit address (only lower 17 bits used), then reads or writes data. Sequential mode allows continuous read/write without re-issuing the address – the internal address counter auto-increments and wraps around at the memory boundary. In SQI mode, data is transferred on all four I/O pins simultaneously, quadrupling the effective throughput. The SRAM cells use a bistable flip-flop structure that retains data as long as power is applied, with no refresh requirement (unlike DRAM). The unlimited endurance is inherent to SRAM – the read and write operations are non-destructive and don’t involve charge movement through oxide layers.

Pin Description: 23LC1024-I/ST Pin Definition and Functions
Pin Name Type Function
1 CS Input Chip select (active LOW)
2 SO/SIO1 I/O SPI data out / SQI data 1
3 NC/SIO2 I/O No connect (SPI) / SQI data 2
4 VSS Power Ground
5 SI/SIO0 I/O SPI data in / SQI data 0
6 SCK Input Serial clock
7 HOLD/SIO3 I/O Hold (SPI) / SQI data 3
8 VDD Power Supply voltage (2.5-5.5V)
Application Scenarios: In which products and applications is 23LC1024-I/ST used
  • 8-bit MCU external 128KB RAM expansion via SPI for audio processing
  • Data logger circular buffer with unlimited endurance for continuous writes
  • Small LCD frame buffer with SQI 80Mbps throughput for 320×240 display
  • Voice recognition working memory with 5uA standby for battery backup
Alternative Models: What chips are recommended as replacements for 23LC1024-I/ST
Manufacturer Part Number Package Notes
Microchip 23LC512-I/ST TSSOP-8 512Kbit, half density
Microchip 23LCV1024-I/ST TSSOP-8 Battery-backed SRAM version
ISSI IS66WVS1M8BLL-104NLI DFN-8 1Mbit SPI PSRAM, lower cost
AP Memory APS6404L-3SQR-SN SOP-8 4Mbit SPI PSRAM, higher density
Espressif ESP-PSRAM64 SOP-8 64Mbit PSRAM for ESP32

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1