Opens in a new tab

24AA02E48T-I/OT

2Kb I2C EEPROM with EUI-48 MAC, 1MHz, 1.7-5.5V, SOT-23-5

12433

Effective Inventory

Image for reference only

Manufacturer Part:

24AA02E48T-I/OT

Package:

SOT-23-5 (3.1 x 1.8 x 1.3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 24AA02E48T-I/OT from Microchip Technology is a 2Kb I2C serial EEPROM pre-programmed with a globally unique EUI-48 MAC address in a 5-pin SOT-23 package. Operating from 1.7V to 5.5V with 1MHz clock rate at 2.5V+, it eliminates the need for MAC address programming during production.

Key Specifications

Density 2 Kbit (256 x 8)
Interface I2C (2-wire)
Max Clock Rate 400 kHz @ 1.7V, 1 MHz @ 2.5V+
Supply Voltage 1.7V to 5.5V
Unique Address EUI-48 (48-bit) factory-programmed
Page Size 8 bytes
Write Cycle Time 3 ms typical (5 ms max)
Endurance 1,000,000 write cycles
Data Retention >200 years
Write Protect Half array
Operating Temperature -40 to +85 C
Package SOT-23-5

Features

  • 2Kb EEPROM with EUI-48 MAC address
  • Globally unique 48-bit node address
  • Compatible with EUI-48 and EUI-64
  • 1.7V to 5.5V wide operating voltage
  • 1uA max standby current
  • Schmitt trigger inputs for noise suppression
  • Half array write protection
  • >4000V ESD protection
  • Up to 3 address pins for bus expansion

Applications

  • Network device MAC address provisioning
  • IoT node identification
  • Ethernet interface MAC storage
  • Embedded system device serialization
Product Introduction: 24AA02E48T-I/OT Product Introduction

The 24AA02E48T-I/OT from Microchip Technology is a 2Kb I2C serial EEPROM pre-programmed with a globally unique EUI-48 MAC address in a 5-pin SOT-23 package. The E48 in the part number indicates the factory-programmed EUI-48 node identity, guaranteed globally unique. The I suffix denotes industrial temperature range (-40 to +85C), T indicates tape and reel packaging, and OT denotes the SOT-23-5 package. The device is organized as two 128×8-bit memory blocks: the upper half contains the read-only 48-bit MAC address, while the lower 1Kb is available for general-purpose data storage. The 1uA maximum standby current and 1mA active current make it ideal for battery-powered applications. The EUI-48 MAC address eliminates the need for manufacturers to program unique identifiers during production, reducing assembly time and ensuring no duplicate MAC addresses.

Working Principle: 24AA02E48T-I/OT Working Principle

The 24AA02E48 operates through three subsystems: (1) EEPROM Array: 2Kbit of electrically erasable PROM organized as 256×8-bit. The upper half is factory-locked with the EUI-48 MAC address (6 bytes at the top of the address space), permanently read-only. The lower half provides 1Kb of general-purpose EEPROM storage with byte and 8-byte page write capability, 1 million cycle endurance, and 200+ year data retention. (2) I2C Interface: A standard 2-wire I2C interface with Schmitt-trigger filtered inputs. The device supports standard mode (100kHz), fast mode (400kHz at 1.7V), and fast mode plus (1MHz at 2.5V+). The MAC address is accessed through a dedicated I2C slave address separate from the main EEPROM array address. (3) Address Configuration: Up to 3 address pins (A0, A1, A2) allow up to 8 devices on the same I2C bus. In the SOT-23-5 package, the A0 pin is shared with the SCL pin function, allowing 2 devices on the same bus.

Pin Description: 24AA02E48T-I/OT Pin Definition and Functions
Pin Name Type Description
1 A0/SCL I/O Address bit / shared with SCL in SOT-23
2 VSS Power Ground
3 SDA I/O Serial data (bidirectional, open-drain)
4 VCC Power Supply voltage (1.7-5.5V)
5 WP Input Write protect (HIGH=protect upper half)
Application Scenarios: In which products and applications is 24AA02E48T-I/OT used
  • Ethernet device MAC address with factory-programmed EUI-48 eliminating production-line serialization
  • IoT node identification with 2Kb EEPROM for configuration data and globally unique 48-bit ID
  • Network interface card with 1MHz I2C at 3.3V and 1uA standby for always-on availability
  • Embedded system device serialization with read-only MAC address and write-protectable user EEPROM
Alternative Models: What chips are recommended as replacements for 24AA02E48T-I/OT
Model Manufacturer Density Address Notes
24AA02E64T-I/OT Microchip 2Kb EUI-64 64-bit MAC version
24AA025E48T-I/OT Microchip 2Kb EUI-48 16-byte page write
AT24CS01-STUM-T Microchip 1Kb 128-bit SN Smaller, serial number only
24AA02T-I/OT Microchip 2Kb No Without MAC address

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1