Opens in a new tab

2N2907A

PNP -60V -600mA BJT, hFE 100-300, TO-92, complementary to 2N2222A

12955

Effective Inventory

Image for reference only

Manufacturer Part:

2N2907A

Package:

TO-92-3

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 2N2907A from onsemi is a general-purpose PNP bipolar junction transistor rated at -60V VCEO and -600mA IC. Complementary to the 2N2222A NPN transistor, it is widely used in push-pull amplifier output stages and general-purpose switching. Packaged in TO-92.

Key Specifications

Type PNP Bipolar Junction Transistor
VCEO -60V
IC (continuous) -600mA
hFE (at 150mA) 100-300
fT 200MHz
VCE(sat) -0.4V (typ at 150mA)
Power Dissipation 625mW
Package TO-92-3
Operating Temperature -55 to +150 C

Features

  • Complementary PNP to 2N2222A
  • High current gain: hFE 100-300
  • 200MHz transition frequency
  • Low saturation voltage: -0.4V typical
  • Industry standard TO-92 package

Applications

  • Push-pull amplifier output stages
  • General-purpose PNP switching
  • Complementary driver circuits
  • Current mirror and bias networks
Product Introduction: 2N2907A Product Introduction

The 2N2907A is a general-purpose PNP bipolar junction transistor from onsemi, rated at -60V VCEO and -600mA IC with hFE of 100-300. As the complementary PNP device to the ubiquitous 2N2222A NPN transistor, it is commonly used in push-pull amplifier output stages, complementary driver circuits, and current mirror configurations. The 200MHz transition frequency supports medium-speed switching applications. The A suffix version provides tighter specifications than the non-A 2N2907. Its low cost and wide availability make it a staple in analog circuit design.

Working Principle: 2N2907A Working Principle

The 2N2907A uses a silicon PNP epitaxial planar structure. In the active region, base current flowing out of the base terminal controls a larger collector current flowing into the collector, with the current gain (hFE) typically 100-300 at 150mA. For switching applications, the transistor is driven into saturation by extracting sufficient base current. The PNP structure has holes as majority carriers in the emitter, which have lower mobility than electrons in NPN devices, resulting in a slightly lower transition frequency (200MHz vs 300MHz for the 2N2222A). The base-emitter forward voltage is approximately -0.7V.

Pin Description: 2N2907A Pin Definition and Functions
Pin Name Function
1 Emitter Emitter terminal
2 Base Base control terminal
3 Collector Collector terminal
Application Scenarios: In which products and applications is 2N2907A used
  • Push-pull audio amplifier output stages paired with 2N2222A
  • General-purpose PNP switching in complementary driver circuits
  • Current mirror and bias networks in analog design
  • Low-side PNP driver for relay and solenoid control
Alternative Models: What chips are recommended as replacements for 2N2907A
Model Manufacturer Key Difference
2N2222A onsemi Complementary NPN device
BC557 Nexperia PNP, -45V, -100mA, European equivalent
2N3906 onsemi PNP, -40V, -200mA, lower current
MMBT2907A onsemi SOT-23 SMD version

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1