Opens in a new tab

35SVPK180M

180uF 35V polymer Al, ~15mOhm, SMD can, -55 to 105C

8404

Effective Inventory

Image for reference only

Manufacturer Part:

35SVPK180M

Package:

SMD Radial Can (7.3×4.3mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 35SVPK180M is a conductive polymer aluminum solid electrolytic capacitor. 180uF, 35V, very low ESR for CPU/FPGA core voltage decoupling.

Key Specifications

Capacitance 180 uF
Rated Voltage 35V
ESR ~15 mOhm typ
Type Conductive Polymer Aluminum
Ripple Current ~3.8A rms @ 100kHz
Operating Temp -55 to +105C
Package SMD radial can

Features

  • 180uF high capacitance
  • 35V for 12V/3.3V rails
  • ~15 mOhm ultra-low ESR
  • Conductive polymer non-drying
  • 3.8A high ripple current rating
  • Flat impedance over frequency

Applications

  • CPU/FPGA core decoupling
  • DC-DC converter output bulk
  • Gaming console power rail
  • Server VRM output filter
Product Introduction: 35SVPK180M Product Introduction

The 35SVPK180M is a 180uF 35V conductive polymer aluminum solid electrolytic capacitor. The conductive polymer cathode provides ~15 mOhm ultra-low ESR, eliminating the high-frequency ESR minimum found in wet aluminum capacitors. 3.8A ripple current rating for demanding DC-DC output applications. Solid polymer eliminates drying-out failure mode for long service life.

Working Principle: 35SVPK180M Working Principle

An aluminum anode foil with etched/formed oxide dielectric and a conductive polymer cathode layer. The polymer replaces the wet electrolyte, providing orders-of-magnitude lower ESR and eliminating the drying failure mechanism. The solid construction is non-polar, but voltage polarity must still be observed.

Pin Description: 35SVPK180M Pin Definition and Functions
Terminal Name Description
+ Anode Positive
– Cathode Negative (case)
Application Scenarios: In which products and applications is 35SVPK180M used
  • CPU/FPGA decoupling
  • DC-DC output bulk
  • Server VRM filter
Alternative Models: What chips are recommended as replacements for 35SVPK180M
Model Manufacturer Key Difference

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1