Opens in a new tab

74HC132D

Quad 2-input NAND Schmitt trigger, 2-6V, 11ns, SOIC-14

5000

Effective Inventory

Image for reference only

Manufacturer Part:

74HC132D

Package:

SOIC-14 / SOT108-1 (8.75×3.9×1.45 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 74HC132D from Nexperia is a quad 2-input NAND gate with Schmitt-trigger inputs. The Schmitt-trigger action transforms slowly changing or noisy input signals into sharply defined, jitter-free output signals, making it ideal for wave shaping, oscillator, and debouncing circuits. With wide 2.0V to 6.0V supply, CMOS low power, and high noise immunity, it is available in an SOIC-14 package specified from -40°C to +125°C.

Key Specifications

Logic Function Quad 2-input NAND with Schmitt trigger
Supply Voltage 2.0V to 6.0V (74HC132)
Propagation Delay 11 ns typical @ 5V
Output Drive ±5.2 mA
Max Frequency 36 MHz
Input Type Schmitt trigger (unlimited rise/fall times)
Output Type Push-pull (CMOS levels)
Quiescent Supply Current Low (CMOS)
ESD Protection HBM >2000V, CDM >1000V
Latch-up >100 mA per JESD 78 Class II Level B
Operating Temperature -40°C to +125°C
Package SOIC-14 (3.9 mm body width, SOT108-1)

Features

  • Schmitt-trigger inputs: unlimited input rise and fall times
  • Transforms slowly changing signals into clean outputs
  • Wide supply voltage range: 2.0V to 6.0V
  • CMOS low power dissipation
  • High noise immunity due to hysteresis
  • Input clamp diodes for overvoltage interface
  • ESD protection: HBM >2000V, CDM >1000V
  • JEDEC standard compliant (JESD7A, JESD8C)

Applications

  • Wave and pulse shaping circuits
  • Astable multivibrators (RC oscillators)
  • Monostable multivibrators (one-shots)
  • Switch debouncing and signal conditioning
  • Noise immunity improvement for slow edges
Product Introduction: 74HC132D Product Introduction

The 74HC132D from Nexperia is a quad 2-input NAND gate with Schmitt-trigger inputs that transform slowly changing or noisy signals into clean, jitter-free outputs. With 2.0V to 6.0V supply, 11 ns propagation delay, high noise immunity, and CMOS low power in an SOIC-14 package rated to 125°C, it is ideal for wave shaping, RC oscillators, debounce circuits, and signal conditioning.

Working Principle: 74HC132D Working Principle

The 74HC132D implements four independent 2-input NAND gates, each with Schmitt-trigger input stages. The Schmitt trigger introduces hysteresis into the input threshold: the positive-going threshold (VT+) is higher than the negative-going threshold (VT-). This hysteresis eliminates output oscillation when the input signal passes slowly through the switching region, as the output only transitions once the input crosses the appropriate threshold. This makes the device ideal for debouncing mechanical switches, conditioning slow or noisy signals, and building RC oscillators where the hysteresis defines the oscillation amplitude. The NAND function outputs LOW only when both inputs are HIGH, implementing Y = NOT(A AND B). Input clamp diodes protect against voltages exceeding VCC, allowing current-limiting resistor interface to higher voltage signals.

Pin Description: 74HC132D Pin Definition and Functions
Pin Name Type Function
1 1A Input Gate 1 input A (Schmitt trigger)
2 1B Input Gate 1 input B (Schmitt trigger)
3 1Y Output Gate 1 output
4 2A Input Gate 2 input A
5 2B Input Gate 2 input B
6 2Y Output Gate 2 output
7 GND Power Ground (0V)
8 3Y Output Gate 3 output
9 3A Input Gate 3 input A
10 3B Input Gate 3 input B
11 4Y Output Gate 4 output
12 4A Input Gate 4 input A
13 4B Input Gate 4 input B
14 VCC Power Supply voltage (2.0-6.0V)
Application Scenarios: In which products and applications is 74HC132D used
  • Switch debouncing: clean output from mechanical contacts
  • RC oscillators: astable multivibrator using 1 gate + RC network
  • Pulse shaping: converting slow edges to sharp digital transitions
  • Signal conditioning: noise immunity for sensor inputs with slow ramps
  • Monostable multivibrators: one-shot timing circuits
Alternative Models: What chips are recommended as replacements for 74HC132D
Manufacturer Part Number Package Notes
Nexperia 74HCT132D SOIC-14 TTL input levels (4.5-5.5V)
TI SN74HC132DR SOIC-14 Functionally equivalent
ON Semi MC74HC132ADR2G SOIC-14 Functionally equivalent
Toshiba TC74HC132AF SOP-14 Functionally equivalent
Nexperia 74HC132PW TSSOP-14 Smaller footprint, same function

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1