Opens in a new tab

74HC245D

Octal bus transceiver, 3-state, 2-6V, 7ns, SOIC-20, bidirectional

34820

Effective Inventory

Image for reference only

Manufacturer Part:

74HC245D

Package:

SOIC-20 (12.8 x 7.5 x 2.65 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 74HC245D from Nexperia (formerly NXP/Philips) is an octal bus transceiver with 3-state outputs in a 20-pin SOIC package. With 2V to 6V supply range, 7ns propagation delay at 5V, and bidirectional data flow controlled by DIR and OE inputs, it is the industry-standard bus interface for microprocessor and digital systems.

Key Specifications

Logic Type Octal Bus Transceiver, 3-State
Channels 8 (bidirectional)
Supply Voltage 2.0V to 6.0V
Propagation Delay 7 ns (typ @ 5V)
Output Drive +/-6 mA @ 4.5V
Output Type 3-State (non-inverting)
ESD Protection HBM >2000V, CDM >1000V
Operating Temperature -40 to +125 C
Package SOIC-20 (7.5mm width)

Features

  • 8-bit bidirectional bus transceiver
  • Non-inverting 3-state outputs
  • Output Enable (OE) and Direction (DIR) control
  • 2V to 6V wide supply voltage range
  • 7ns propagation delay at 5V
  • CMOS low power dissipation
  • High noise immunity
  • Input clamp diodes for overvoltage protection
  • ESD protection: HBM >2000V
  • Pin compatible with 74HCT245 (TTL input levels)

Applications

  • Microprocessor bus interface buffering
  • Memory bank switching
  • Level translation between logic domains
  • Board-to-board communication isolation
Product Introduction: 74HC245D Product Introduction

The 74HC245D from Nexperia is an octal bus transceiver with 3-state non-inverting outputs in a 20-pin SOIC package. The D suffix denotes the SOIC-20 package with 7.5mm body width. As the industry-standard 8-bit bus transceiver, it provides bidirectional data transfer between two buses using a Direction (DIR) pin for flow control and an Output Enable (OE) pin for bus isolation. With 2V to 6V supply range and 7ns propagation delay at 5V, it serves as a universal bus buffer in microprocessor systems, memory interfaces, and board-to-board communication links. The 3-state outputs allow multiple devices to share a common bus without contention. The 74HCT245D variant provides TTL-compatible input thresholds.

Working Principle: 74HC245D Working Principle

The 74HC245D operates through three subsystems: (1) Bidirectional Data Path: Eight identical non-inverting data channels connect the A bus (A0-A7) to the B bus (B0-B7). Each channel can carry data in either direction, but only one direction at a time. (2) Direction Control: The DIR pin determines data flow direction. When DIR is HIGH, data flows from A to B (A inputs, B outputs). When DIR is LOW, data flows from B to A (B inputs, A outputs). This allows a single control line to manage bidirectional bus communication. (3) Bus Isolation: The active-low OE (Output Enable) pin controls the 3-state outputs. When OE is LOW, the outputs are enabled according to the DIR setting. When OE is HIGH, all outputs are forced to a high-impedance state, effectively disconnecting the device from both buses. This allows multiple 74HC245 devices to share the same bus through time-division multiplexing. Input clamp diodes on all inputs allow interfacing to voltages exceeding VCC when current-limiting resistors are used.

Pin Description: 74HC245D Pin Definition and Functions
Pin Name Type Description
1 DIR Input Direction control (HIGH=A-to-B, LOW=B-to-A)
2-9 A0-A7 I/O Bus A data lines
10 GND Power Ground
11-18 B7-B0 I/O Bus B data lines (reversed pin order)
19 OE Input Output enable (active LOW)
20 VCC Power Supply voltage (2-6V)
Application Scenarios: In which products and applications is 74HC245D used
  • Microprocessor 8-bit data bus buffering with OE control for bus isolation during DMA cycles
  • Memory bank switching with DIR pin selecting read/write direction and OE enabling specific banks
  • Board-to-board communication with 3-state outputs allowing multiple boards on a shared bus
  • Level translation between 3.3V and 5V logic domains using input clamp diodes with series resistors
Alternative Models: What chips are recommended as replacements for 74HC245D
Model Manufacturer Input Level Package Notes
74HCT245D Nexperia TTL SOIC-20 TTL-compatible inputs
74LVC245APW Nexperia CMOS TSSOP-20 3.3V, smaller package
SN74HC245DW TI CMOS SOIC-20 Pin-compatible alternative
MC74HC245DWG onsemi CMOS SOIC-20 Pin-compatible alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1