Opens in a new tab

Home » Integrated Circuits ICs » 74HC595D,118

74HC595D,118

8-bit shift register with latch, 3-state out, 100MHz, cascade, SOIC-16

11276

Effective Inventory

Image for reference only

Manufacturer Part:

74HC595D,118

Package:

SOIC-16 (10 x 3.9 x 1.58 mm, SOT109-1)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 74HC595D,118 from Nexperia is an 8-bit serial-in/serial-or-parallel-out shift register with output latches and 3-state outputs, supporting 100MHz shift frequency in a 16-pin SOIC package.

Key Specifications

Function 8-Bit Shift Register with Output Latches
Bits 8
Supply Voltage 2V to 6V
Shift Frequency 100 MHz (typ, VCC=5V)
Output Type 3-State
Output Drive +/-7.8 mA @ 5V
Propagation Delay 14-35 ns (typ, VCC=4.5V)
Clock Inputs SHCP (shift), STCP (storage)
Serial Output Q7S (for cascading)
Master Reset MR (active LOW, asynchronous)
Output Enable OE (active LOW)
Package SOIC-16 (3.9mm width)
Operating Temperature -40 to +125 C

Features

  • 8-bit serial input, 8-bit parallel output with latch
  • Separate shift and storage register clocks
  • Serial output Q7S for daisy-chaining
  • 3-state outputs for bus sharing
  • Asynchronous master reset (MR)
  • 100MHz typical shift frequency
  • Input clamp diodes for voltage translation

Applications

  • LED matrix and display driving (multiplexing)
  • Expanding MCU GPIO pins via SPI
  • Serial-to-parallel data conversion
  • Cascaded display register chains
Product Introduction: 74HC595D,118 Product Introduction

The 74HC595D,118 from Nexperia is an 8-bit serial-in/serial-or-parallel-out shift register with separate shift and storage registers, 3-state outputs, and daisy-chain capability. The device accepts serial data on the DS (data serial) input, clocked in on the rising edge of the SHCP (shift clock) input. After 8 bits have been shifted in, the STCP (storage clock) rising edge transfers the shift register contents to the storage register, which drives the 8 parallel outputs (Q0-Q7). The 3-state output enable (OE, active LOW) allows multiple 74HC595 devices to share the same output bus or to disable outputs during system initialization. A serial output (Q7S) provides the data shifted out of the 8th stage, enabling daisy-chaining of multiple devices for 16-bit, 24-bit, or wider output registers using only 3 MCU pins (DS, SHCP, STCP). The asynchronous master reset (MR, active LOW) clears the shift register independently of the clocks. The 74HC595 is one of the most popular logic ICs for expanding GPIO pins on microcontrollers, driving LED matrices, 7-segment displays, and relay boards. The ,118 suffix indicates Nexperia’s tape-and-reel packaging. The device operates from 2V to 6V supply with typical shift frequencies of 100MHz at 5V, far exceeding the requirements of typical SPI interfaces.

Working Principle: 74HC595D,118 Working Principle

The 74HC595D,118 operates as a serial-to-parallel converter with separate shift and storage registers. Key subsystems include: (1) Shift Register – 8 flip-flops connected in series; data on the DS input is captured on the rising edge of SHCP and shifted through each stage; after 8 SHCP pulses, all 8 bits of serial data occupy the shift register; the Q7S output reflects the data shifted out of stage 8, enabling cascading to the next device; (2) Storage Register – 8 D-type latches in parallel; on the rising edge of STCP, the current contents of the shift register are transferred to the storage register; this dual-register architecture allows new data to be shifted in while the previous data remains displayed on the outputs; (3) 3-State Outputs – the storage register outputs are buffered through 3-state output drivers controlled by the OE pin; when OE is LOW, the outputs reflect the storage register data; when OE is HIGH, the outputs are high-impedance; this allows bus sharing and controlled output activation; (4) Master Reset – the MR input asynchronously clears the shift register (all stages to LOW) when driven LOW; the storage register is not affected by MR; to clear both registers, assert MR then pulse STCP; (5) Cascading – the Q7S output connects to the DS input of the next 74HC595 in the chain; all devices share the same SHCP and STCP lines; after shifting 16 bits (for 2 devices), 24 bits (for 3), etc., a single STCP pulse updates all outputs simultaneously.

Pin Description: 74HC595D,118 Pin Definition and Functions
Pin Name Function
1 Q1 Parallel output bit 1
2 Q2 Parallel output bit 2
3 Q3 Parallel output bit 3
4 Q4 Parallel output bit 4
5 Q5 Parallel output bit 5
6 Q6 Parallel output bit 6
7 Q7 Parallel output bit 7
8 GND Ground
9 Q7S Serial output (for cascading to next DS)
10 MR Master reset (active LOW, clears shift register)
11 SHCP Shift register clock (rising edge shifts data)
12 STCP Storage register clock (rising edge latches data)
13 OE Output enable (active LOW; HIGH = high-Z outputs)
14 DS Serial data input
15 Q0 Parallel output bit 0
16 VCC Supply voltage (2V to 6V)
Application Scenarios: In which products and applications is 74HC595D,118 used
  • LED matrix driver: 2x 74HC595 cascade drives 8×8 LED matrix (8 anodes + 8 cathodes) from 3 MCU pins
  • 7-segment multiplex: 4-digit display with 2 cascaded 74HC595 (digit select + segment data)
  • Relay board: 8-channel relay module controlled via SPI from single GPIO
  • GPIO expansion: add 8+ digital outputs to Arduino/RPi with 3-wire SPI interface
Alternative Models: What chips are recommended as replacements for 74HC595D,118
Manufacturer Part Number Package Notes
TI SN74HC595DWR SOIC-16 TI version, wide SOIC
Nexperia 74HC595PW,118 TSSOP-16 Smaller TSSOP package
Microchip 74HC595D SOIC-16 Microchip version
Nexperia 74HCT595D,118 SOIC-16 TTL-compatible input thresholds
TI TPIC6B595DWR SOIC-20 Power shift register, 50mA/50V open-drain

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1