Opens in a new tab

74HCT125D

Quad buffer/line driver, 3-state, HCT, SOIC-14, 13ns, LSTTL compatible, bus driver

18200

Effective Inventory

Image for reference only

Manufacturer Part:

74HCT125D

Package:

SOIC-14 (8.65 x 3.91 x 1.58 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 74HCT125D from Nexperia is a quad buffer/line driver with 3-state outputs in SOIC-14. Each buffer has an active-low output enable, allowing bus-oriented applications where multiple devices share common data lines. HCT input levels provide compatibility with LSTTL while driving CMOS-level outputs.

Key Specifications

Logic Family 74HCT
Supply Voltage 4.5 V to 5.5 V
Propagation Delay 13 ns (typ)
Output Current +/-6 mA
Input Levels LSTTL compatible (HCT)
Channels 4 (independent)
Output Enable Active low (per buffer)
Operating Temperature -40C to +125C

Features

  • Quad non-inverting buffer with individual 3-state output enables
  • HCT input compatibility with LSTTL logic levels
  • Active-low output enable per channel for bus sharing
  • 13ns typical propagation delay for fast signal buffering

Applications

  • Bus driver and buffer for microprocessor systems
  • 3-state bus interface for shared data lines
  • Level translation between TTL and CMOS
  • Signal buffering and fan-out enhancement
Product Introduction: 74HCT125D Product Introduction

The 74HCT125D from Nexperia is a quad non-inverting buffer/line driver with 3-state outputs in SOIC-14. Each of the four buffers has an independent active-low output enable (OE), allowing individual channel control for bus-oriented applications. The HCT input logic levels are compatible with LSTTL (VIH=2.0V, VIL=0.8V) while the outputs drive full CMOS levels at VCC. The device operates from 4.5V to 5.5V with 13ns typical propagation delay and +/-6mA output drive current. When OE is high, the output enters high-impedance state, allowing bus sharing with other devices.

Working Principle: 74HCT125D Working Principle

The 74HCT125D contains four independent non-inverting buffers with 3-state output control. (1) Buffer: Each buffer passes the input data to the output without inversion. The HCT input stage has TTL-compatible threshold (VIH=2.0V, VIL=0.8V), enabling direct interface with LSTTL outputs. The output stage drives full CMOS voltage levels. (2) 3-State Control: When the output enable (OE) pin is low, the buffer output is active and drives the data. When OE is high, both the pull-up and pull-down transistors in the output stage are turned off, placing the output in a high-impedance (Hi-Z) state. This allows multiple 3-state devices to share a common bus without contention. (3) Bus Sharing: Only one device should drive the bus at a time. The 13ns propagation delay and fast enable/disable times allow efficient bus arbitration.

Pin Description: 74HCT125D Pin Definition and Functions
Pin Name Type Function
1 1OE Input Channel A output enable (active low)
2 1A Input Channel A data input
3 1Y Output Channel A output (3-state)
4 2OE Input Channel B output enable (active low)
5 2A Input Channel B data input
6 2Y Output Channel B output (3-state)
7 GND Ground Ground
8-14 3Y/3A/3OE/4Y/4A/4OE/VCC I/O Channels C, D, and power
Application Scenarios: In which products and applications is 74HCT125D used
  • Microprocessor bus driver with 3-state output for shared data lines
  • Level translation between TTL outputs and CMOS inputs
  • Signal buffering and fan-out enhancement for clock and control signals
  • I/O port expansion with individual enable control
Alternative Models: What chips are recommended as replacements for 74HCT125D
Manufacturer Part Number Package Notes
TI SN74HCT125DR SOIC-14 Direct equivalent
onsemi MC74HCT125ADG SOIC-14 Direct equivalent
Nexperia 74HC125D SOIC-14 HC version, CMOS inputs
Nexperia 74HCT126D SOIC-14 Active-high enable version

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1