Opens in a new tab

Home » Integrated Circuits ICs » 74LVC125APW

74LVC125APW

Quad buffer/line driver, 3-state outputs, 1.2-3.6V, 5V tolerant I/O, TSSOP14, ±24mA, Ioff

9421

Effective Inventory

Image for reference only

Manufacturer Part:

74LVC125APW

Package:

TSSOP14 (SOT402-1) 5.0 x 4.4 x 1.1 mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Nexperia 74LVC125APW is a quad buffer/line driver with 3-state outputs and 5V tolerant I/Os in a TSSOP14 package. It operates from 1.2 V to 3.6 V, features Schmitt-trigger inputs, Ioff circuitry for partial power-down, and ±24 mA output drive capability.

Key Specifications

Supply Voltage (VCC) 1.2 V to 3.6 V
Logic Switching Levels CMOS/LVTTL
Output Drive ±24 mA
Max Frequency 175 MHz
Number of Buffers 4 (Quad)
Output Type 3-state (controlled by nOE)
Input Type Schmitt Trigger, 5V tolerant
Operating Temperature -40°C to +125°C
ESD Protection HBM >2000V, CDM >1000V

Features

  • Wide supply voltage range from 1.2 V to 3.6 V
  • Overvoltage tolerant inputs and outputs up to 5.5 V
  • Schmitt-trigger action at all inputs for slower rise/fall tolerance
  • Ioff circuitry enables partial power-down mode operation
  • 3-state outputs controlled by active LOW enable inputs (nOE)
  • Complies with JEDEC standards JESD8-7A, JESD8-5A, JESD8-C

Applications

  • Bus buffering and line driving in digital systems
  • 3-state bus interface for multi-master systems
  • Voltage level translation between 3.3V and 5V
  • Automotive logic circuits
Product Introduction: 74LVC125APW Product Introduction

The Nexperia 74LVC125APW is a quad non-inverting buffer/line driver with 3-state outputs in a TSSOP14 package. The device consists of four independent buffers with individual active LOW output enable inputs (nOE). A HIGH on nOE causes the corresponding output to assume a high-impedance OFF-state. Inputs can be driven from either 3.3V or 5V devices, enabling use as a translator in mixed-voltage environments. Schmitt-trigger action at all inputs provides tolerance to slower input rise and fall times. The Ioff circuitry disables outputs when the device is powered down, preventing damaging backflow current — essential for partial power-down applications. The device operates from 1.2V to 3.6V with ±24 mA output drive and is specified from -40°C to +125°C.

Working Principle: 74LVC125APW Working Principle

The 74LVC125APW contains four independent non-inverting buffers, each with a dedicated active LOW output enable (nOE) input. When nOE is LOW, the buffer passes the input signal (nA) directly to the output (nY) with a propagation delay. When nOE is HIGH, the output enters a high-impedance (3-state) state, effectively disconnecting the buffer from the bus. This allows multiple devices to share a common bus without contention. The Schmitt-trigger input buffers provide hysteresis for noise immunity and slow-edge tolerance. The 5V tolerant inputs and outputs accept voltages up to 5.5V regardless of VCC, enabling level translation. The Ioff circuitry ensures that when VCC is at 0V, all outputs are high-impedance, preventing backflow current through the device.

Pin Description: 74LVC125APW Pin Definition and Functions
Pin Name Type Function
1 1OE Input Output enable for Buffer 1 (active LOW)
2 1A Input Data input for Buffer 1
3 1Y Output Data output for Buffer 1 (3-state)
4 2Y Output Data output for Buffer 2 (3-state)
5 2A Input Data input for Buffer 2
6 2OE Input Output enable for Buffer 2 (active LOW)
7 GND Power Ground (0 V)
8 3OE Input Output enable for Buffer 3 (active LOW)
9 3A Input Data input for Buffer 3
10 3Y Output Data output for Buffer 3 (3-state)
11 4Y Output Data output for Buffer 4 (3-state)
12 4A Input Data input for Buffer 4
13 4OE Input Output enable for Buffer 4 (active LOW)
14 VCC Power Supply voltage
Application Scenarios: In which products and applications is 74LVC125APW used
  • Bus buffering and line driving in multi-master digital systems
  • 3-state bus interface for shared data buses
  • Voltage level translation between 3.3V and 5V logic families
  • Automotive electronic control unit signal routing
  • Industrial automation bus isolation circuits
Alternative Models: What chips are recommended as replacements for 74LVC125APW
Manufacturer Part Number Package Notes
Texas Instruments SN74LVC125APWR TSSOP-14 Pin-to-pin compatible
onsemi MC74LCX125ADR2G SOIC-14 Similar function, SOIC package
Toshiba TC74LCX125AP DIP-14 Equivalent function
Nexperia 74LVC125AD SO14 Same function, SO package
Nexperia 74HC125PW TSSOP14 HC family variant, wider voltage range

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1