Opens in a new tab

Home » Integrated Circuits ICs » 74LVC1G17GW

74LVC1G17GW

Single Schmitt trigger buffer, 1.65-5.5V, ±32mA drive, overvoltage tolerant, TSSOP5

8521

Effective Inventory

Image for reference only

Manufacturer Part:

74LVC1G17GW

Package:

TSSOP5 / SOT353-1 (2.0 x 1.25 x 0.95 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 74LVC1G17GW from Nexperia is a single Schmitt trigger buffer in a TSSOP5 (SOT353-1) package. It features a wide supply voltage range of 1.65 V to 5.5 V, overvoltage-tolerant inputs up to 5.5 V, and ±32 mA output drive capability. The Schmitt trigger input provides high noise immunity and converts slowly changing input signals into clean, sharply defined output transitions, making it ideal for signal conditioning in mixed-voltage systems.

Key Specifications

Logic Function Single Schmitt Trigger Buffer (non-inverting)
Supply Voltage (VCC) 1.65 V to 5.5 V
Input Voltage Tolerance Up to 5.5 V (overvoltage tolerant)
Output Drive Current ±32 mA at VCC = 3.0 V
Propagation Delay Typ. 5.5 ns at VCC = 3.3 V
Maximum Frequency 175 MHz
Quiescent Current 10 µA (typical)
Package TSSOP5 (SOT353-1), 2.0 x 1.25 mm
Operating Temperature -40°C to +125°C
ESD Protection HBM > 2000 V, CDM > 1000 V
IOFF Support Yes (partial power-down isolation)

Features

  • Wide supply voltage range: 1.65 V to 5.5 V for versatile voltage operation
  • Overvoltage tolerant inputs up to 5.5 V enable mixed 3.3 V / 5 V translation
  • Schmitt trigger action provides high noise immunity and unlimited input rise/fall times
  • IOFF circuitry prevents damaging backflow current during partial power-down
  • ±32 mA output drive capability for direct interface with TTL and CMOS levels
  • Latch-up performance exceeds 250 mA per JEDEC standard
  • Complies with JEDEC standards: JESD8-7, JESD8-5, JESD8C, JESD36
  • ESD protection: HBM Class 2 (> 2000 V), CDM Class C3 (> 1000 V)

Applications

  • Signal conditioning for noisy or slowly changing input signals
  • Voltage level translation between 3.3 V and 5 V logic domains
  • Input signal squaring for microcontroller and FPGA interfaces
  • Industrial automation sensor signal buffering
  • Push-button debounce and waveform shaping circuits
Product Introduction: 74LVC1G17GW Product Introduction

The 74LVC1G17GW is a single Schmitt trigger buffer manufactured by Nexperia in a compact TSSOP5 (SOT353-1) package. The device provides non-inverting buffer action with Schmitt trigger inputs that deliver high noise immunity by converting slowly changing or noisy input signals into clean, well-defined output transitions. The wide supply voltage range of 1.65 V to 5.5 V combined with overvoltage-tolerant inputs (up to 5.5 V) makes it an excellent choice for voltage level translation in mixed 3.3 V and 5 V environments. The IOFF circuitry ensures safe partial power-down operation by disabling the output and preventing backflow current when the device is powered down. With ±32 mA output drive at 3.0 V and propagation delay of typically 5.5 ns, this buffer is suitable for high-speed signal conditioning applications.

Working Principle: 74LVC1G17GW Working Principle

The 74LVC1G17GW operates as a non-inverting buffer with Schmitt trigger input stage consisting of two key subsystems: (1) Schmitt Trigger Input — The input stage incorporates two distinct threshold voltage levels: a higher threshold (VT+) for rising input signals and a lower threshold (VT-) for falling input signals. This hysteresis (VT+ minus VT-) provides noise immunity by ensuring the output does not oscillate or switch erratically when the input signal is near the switching point or has slow edge rates. The input can be driven from either 3.3 V or 5 V sources regardless of the device supply voltage, enabling bidirectional voltage translation. (2) Output Buffer Stage — A CMOS push-pull output stage delivers ±32 mA drive current at 3.0 V supply, capable of directly interfacing with TTL and CMOS logic levels. The IOFF circuit isolates the output when VCC is at ground potential, preventing parasitic current paths in partial power-down scenarios. The device supports unlimited input rise and fall times due to the Schmitt trigger action.

Pin Description: 74LVC1G17GW Pin Definition and Functions
Pin Name Type Function
1 A Input Schmitt trigger data input; overvoltage tolerant to 5.5 V
2 GND Ground Common ground reference
3 NC No Connect Not internally connected; leave floating or tie to GND
4 Y Output Buffered Schmitt trigger output; CMOS push-pull
5 VCC Power Positive supply voltage (1.65 V to 5.5 V)
Application Scenarios: In which products and applications is 74LVC1G17GW used
  • Signal conditioning: converting slow, noisy, or distorted input waveforms into clean digital signals for MCU/FPGA interfaces
  • Voltage level translation: bridging 3.3 V and 5 V logic domains without additional level shifters
  • Sensor interface buffering: squaring analog sensor outputs (thermistors, photodiodes) for digital processing
  • Push-button debounce: Schmitt trigger hysteresis eliminates contact bounce in mechanical switches
  • Industrial I/O protection: overvoltage tolerant inputs and IOFF isolation protect downstream circuitry
Alternative Models: What chips are recommended as replacements for 74LVC1G17GW
Manufacturer Part Number Package Notes
Nexperia 74LVC1G17GV TSOP5 (SOT753) Same function, wider TSOP5 package
Nexperia 74LVC1G17GM XSON6 (SOT886) Leadless package, smaller footprint
Texas Instruments SN74LVC1G17DBVR SOT-23-5 Pin-compatible Schmitt trigger buffer
onsemi NC7SZ17P5X SOT-23-5 Single Schmitt buffer, 1.65-5.5V
Diodes Inc 74LVC1G17DW-7 SOT-363 Equivalent function, Diodes Inc brand
Nexperia 74HC1G17GW TSSOP5 HC variant, 2.0-6.0V supply range

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1