Opens in a new tab

Home » Integrated Circuits ICs » 74LVC2G74DC

74LVC2G74DC

Single D-type flip-flop with set/reset, positive edge trigger, 1.65-5.5V, VSSOP8, 3.5ns tpd, 280MHz

5417

Effective Inventory

Image for reference only

Manufacturer Part:

74LVC2G74DC

Package:

VSSOP8 (SOT765-1) 2.3 x 2.0 x 0.75 mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Nexperia 74LVC2G74DC is a single positive-edge triggered D-type flip-flop with set and reset, housed in a VSSOP8 package. It operates from 1.65 V to 5.5 V, offers ±32 mA output drive, 3.5 ns propagation delay, and features Schmitt-trigger inputs and Ioff circuitry for partial power-down mode.

Key Specifications

Supply Voltage (VCC) 1.65 V to 5.5 V
Propagation Delay (tpd) 3.5 ns (typical)
Max Frequency 280 MHz
Output Drive ±32 mA
Input Type Schmitt-trigger, 5V tolerant
Logic Switching Levels CMOS/LVTTL
Trigger Type Positive Edge
Operating Temperature -40°C to +125°C
Package VSSOP8 (SOT765-1)

Features

  • Wide supply voltage range from 1.65 V to 5.5 V
  • Overvoltage tolerant inputs up to 5.5 V
  • Schmitt-trigger action at all inputs for slower rise/fall tolerance
  • Ioff circuitry enables partial power-down mode operation
  • ±24 mA output drive at VCC = 3.0V (±32 mA max)
  • Latch-up performance exceeds 250 mA
  • Complies with JEDEC standards JESD8-7, JESD8-5, JESD8-B

Applications

  • Registers and data storage in portable devices
  • Clock synchronization circuits
  • Mixed 3.3V and 5V voltage translation
  • Industrial control logic
Product Introduction: 74LVC2G74DC Product Introduction

The Nexperia 74LVC2G74DC is a single positive-edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition is stored in the flip-flop and appears at the Q output. The device operates over a wide supply voltage range of 1.65 V to 5.5 V with inputs that can be driven from either 3.3 V or 5 V devices, enabling use as a translator in mixed-voltage environments. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. The Ioff circuitry disables the output during power-down, preventing damaging backflow current. The device is specified from -40°C to +125°C.

Working Principle: 74LVC2G74DC Working Principle

The 74LVC2G74DC implements a single D-type flip-flop with asynchronous set and reset. On the rising edge of the clock (CP), the data at the D input is sampled and transferred to the Q output. The set (SD, active LOW) and reset (RD, active LOW) inputs operate asynchronously and independently of the clock — asserting SD forces Q HIGH, while asserting RD forces Q LOW. When both SD and RD are deasserted (HIGH), normal clocked operation resumes. Schmitt-trigger input buffers on all inputs provide hysteresis for noise immunity and tolerance of slow input transitions. The Ioff circuitry ensures that when VCC is at 0V, all outputs are placed in a high-impedance state, preventing backflow current through the device — essential for partial power-down applications.

Pin Description: 74LVC2G74DC Pin Definition and Functions
Pin Name Type Function
1 CP Input Clock input (positive edge triggered)
2 D Input Data input
3 Q Output True output
4 GND Power Ground (0 V)
5 ~Q Output Complementary output
6 nRD Input Asynchronous reset (active LOW)
7 nSD Input Asynchronous set (active LOW)
8 VCC Power Supply voltage
Application Scenarios: In which products and applications is 74LVC2G74DC used
  • Data registers and storage in portable electronics
  • Clock domain synchronization circuits
  • Voltage level translation between 3.3V and 5V logic
  • Industrial control and automation logic
  • Automotive electronic control modules
Alternative Models: What chips are recommended as replacements for 74LVC2G74DC
Manufacturer Part Number Package Notes
Texas Instruments SN74LVC2G74DCUR VSSOP-8 Pin-to-pin compatible
onsemi NL17SZ74USG MicroPak-6 Single D flip-flop, smaller package
Toshiba TC7W74FK USV-8 Equivalent function
Nexperia 74LVC2G74DP TSSOP8 Same function, TSSOP package
Nexperia 74LVC1G74DC VSSOP8 Similar single D flip-flop variant

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1