Opens in a new tab

NCP511SN33T1G

150mA LDO, 3.3V, 30uVrms noise, 75dB PSRR, SOT-23-5, onsemi NCP511

5374

Effective Inventory

Image for reference only

Manufacturer Part:

NCP511SN33T1G

Package:

SOT-23-5 (2.9 x 1.6 x 1.15mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The onsemi NCP511SN33T1G is a 150mA low-noise LDO providing a fixed 3.3V output in SOT-23-5 package. With 30uVrms output noise, 75dB PSRR at 1kHz, and 250mV dropout at 150mA, it delivers ultra-clean power for noise-sensitive RF and precision analog applications.

Key Specifications

Output Voltage 3.3V (fixed)
Output Current 150mA
Input Voltage 2.5V to 6.0V
Dropout Voltage 250mV @ 150mA
Output Noise 30uVrms (10Hz-100kHz)
PSRR 75dB @ 1kHz
Quiescent Current 40uA (typical)
Accuracy ±1%
Package SOT-23-5
Operating Temperature -40°C to +125°C

Features

  • 30uVrms ultra-low output noise
  • 75dB PSRR at 1kHz
  • ±1% output accuracy
  • Noise bypass pin
  • 40uA low quiescent current
  • Stable with 1uF ceramic output

Applications

  • RF module clean power
  • ADC/DAC reference supply
  • Precision analog front-end
  • GPS receiver supply
  • Audio codec power
Product Introduction: NCP511SN33T1G Product Introduction

The onsemi NCP511SN33T1G is a 150mA ultra-low-noise LDO providing a fixed 3.3V output with 30uVrms output noise and 75dB PSRR in SOT-23-5 package. It is designed for the most noise-sensitive RF and precision analog applications where supply cleanliness directly impacts system performance, such as GPS receivers, ADC/DAC references, and RF modules.

Working Principle: NCP511SN33T1G Working Principle

The NCP511SN33T1G uses a CMOS LDO architecture with a noise bypass (BP) pin connected to the internal bandgap reference. An external capacitor on the BP pin (typically 22nF) filters reference noise, achieving 30uVrms output noise and 75dB PSRR. The ±1% accuracy is maintained over temperature and load. The 40uA quiescent current provides a good balance between noise performance and battery life for portable applications.

Pin Description: NCP511SN33T1G Pin Definition and Functions
Pin Name Type Function
1 VIN Input Input supply (2.5-6.0V)
2 GND Ground Ground
3 EN Input Enable (active high)
4 BP I/O Noise bypass capacitor
5 VOUT Output 3.3V regulated output
Application Scenarios: In which products and applications is NCP511SN33T1G used
  • GPS receiver LNA clean 3.3V supply
  • 24-bit ADC voltage reference supply
  • RF transceiver VDD noise filtering
  • Audio codec analog 3.3V rail
  • Precision sensor signal conditioning supply
Alternative Models: What chips are recommended as replacements for NCP511SN33T1G
Manufacturer Part Number Package Notes
TI TPS73633DBVR SOT-23-5 400mA, 30uVrms
Richtek RT9193-33GB SOT-23-5 300mA, ultra-low noise
ADI LT1761ES5-3.3#TRMPBF SOT-23-5 20uVrms, lowest noise
onsemi NCP512SN33T1G SOT-23-5 250mA version
TI TLV70033DDCR SOT-23-5 300mA, 48uVrms

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1