Product Overview
The Diodes Inc AP2127K-3.3TRG1 is a 300mA ultra-low-Iq LDO providing a fixed 3.3V output in SOT-23-5 package. With only 3uA quiescent current and 300mV dropout at 300mA, it is optimized for always-on battery-powered IoT and metering applications where minimizing standby current is paramount.
Key Specifications
| Output Voltage | 3.3V (fixed) |
| Output Current | 300mA |
| Input Voltage | 2.0V to 6.0V |
| Dropout Voltage | 300mV @ 300mA |
| Quiescent Current | 3uA (typical) |
| Shutdown Current | 0.1uA |
| Accuracy | ±2% |
| Package | SOT-23-5 |
| Operating Temperature | -40°C to +85°C |
Features
- 3uA ultra-low quiescent current
- 0.1uA shutdown current
- 300mA output current
- Enable pin for power control
- Always-on IoT sensor power
- Smart meter 3.3V rail
- Battery-powered metering
- Energy harvesting systems
- Sleep-mode power rails
- Always-on IoT sensor 3.3V power from coin cell
- Smart meter 3.3V always-active rail
- Energy harvesting buffer regulator
- Low-power MCU VDD in battery backup systems
- Wearable sleep-mode 3.3V supply
Applications
Product Introduction: AP2127K-3.3TRG1 Product Introduction
The Diodes Inc AP2127K-3.3TRG1 is a 300mA LDO providing a fixed 3.3V output with ultra-low 3uA quiescent current in SOT-23-5 package. The 3uA Iq makes it ideal for always-on battery-powered systems such as IoT sensors, smart meters, and energy harvesting applications where standby current directly determines battery life.
Working Principle: AP2127K-3.3TRG1 Working Principle
The AP2127K-3.3TRG1 uses a CMOS LDO architecture with specialized ultra-low-bias circuitry achieving 3uA quiescent current while maintaining regulation and transient response. The 2.0V minimum input voltage supports operation from a single alkaline or NiMH cell. The 0.1uA shutdown current virtually eliminates battery drain when the output is disabled. The device is stable with only 1uF ceramic output capacitor.
Pin Description: AP2127K-3.3TRG1 Pin Definition and Functions
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | Input | Input supply (2.0-6.0V) |
| 2 | GND | Ground | Ground |
| 3 | EN | Input | Enable (active high) |
| 4 | NC | – | No connect |
| 5 | VOUT | Output | 3.3V regulated output |
Application Scenarios: In which products and applications is AP2127K-3.3TRG1 used
Alternative Models: What chips are recommended as replacements for AP2127K-3.3TRG1
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| TI | TLV70233DBVR | SOT-23-5 | 1uA Iq, similar spec |
| Diodes Inc | AP2112K-3.3TRG1 | SOT-23-5 | 600mA, 55uA Iq |
| Richtek | RT9080-33GJ5 | TSOT-23-5 | 600mA, 2uA Iq |
| Microchip | MCP1804T-3302I/OT | SOT-23-3 | 50uA Iq, no EN |
| onsemi | NCP4681SN33T1G | SOT-89-3 | 150mA, 50V |
Recommend Parts

RK73H1ETTP20R0F
20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200
Brand: KOA Speer
Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm
IN STOCK: 33180pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS77001DBVR
50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)
IN STOCK: 5000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS61021ADSGR
3A synchronous boost converter, 1.8-5.5V, VSSOP-8
Brand: TI
Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)
IN STOCK: 12398pcs
Cargo cycle: 3-7 Days
The minimum order is 1

S1MB-13-F
1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C
Brand: Diodes Inc
Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)
IN STOCK: 3679pcs
Cargo cycle: 3-7 Days
The minimum order is 1

ADUM5000ARWZ-RL
500mW isolated DC-DC converter, 3.3/5V, SOIC-16W
Brand: ADI
Package: SOIC-16W (10.3 x 7.5 mm, RW package)
IN STOCK: 6373pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IN STOCK: 9357pcs
Cargo cycle: 3-7 Days
The minimum order is 1






