Opens in a new tab

S25FL128SAGNFA003

128Mbit SPI NOR Flash, FL-S family, 133MHz, 3V, uniform 256KB sectors, WSON-8, AEC-Q100

11090

Effective Inventory

Image for reference only

Manufacturer Part:

S25FL128SAGNFA003

Package:

PG-WSON-8 / DFN-8 (6.0 x 8.0 x 0.55 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The S25FL128SAGNFA003 is a Infineon product designed for electronic applications. It features compact design with reliable performance characteristics suitable for various industrial and consumer applications.

Key Specifications

Memory Type SPI NOR Flash
Density 128Mbit (16MB)
Organization 64K Uniform Sectors (256 each)
Interface SPI (Single/Dual/Quad I/O)
Max Clock Frequency 133 MHz (Quad I/O)
Supply Voltage 2.7V to 3.6V
Page Size 256 bytes
Programming Buffer 256 bytes
Page Program Time 1.5 ms (Typ)
Sector Erase Time 700 ms (Typ)
Program/Erase Cycles 100,000
Data Retention 20 Years
Operating Temperature -40 C to +85 C
Package PG-WSON-8 (6.0 x 8.0 mm)
Qualification AEC-Q100

Features

128Mbit SPI NOR Flash with Single/Dual/Quad I/O; 133MHz clock in Quad I/O mode; Uniform 256KB sector architecture; 256-byte programming buffer; Advanced Sector Protection (persistent and volatile); 1024-byte OTP area; Quad Read with XIP capability; Full command set compatibility with FL-S family; AutoBoot feature for rapid system startup; Hardware and software reset; AEC-Q100 qualified; 20-year data retention

Applications

Automotive infotainment and ADAS; Industrial control and automation; Networking and telecom equipment; Embedded code storage (XIP); Consumer electronics; Set-top boxes and smart TVs

Product Introduction: S25FL128SAGNFA003 Product Introduction

The S25FL128SAGNFA003 from Infineon Technologies is a 128Mbit (16MB) serial peripheral interface (SPI) NOR Flash memory device from the FL-S family, fabricated on 65nm MirrorBit technology. The device supports Single, Dual, and Quad I/O SPI protocols with a maximum clock frequency of 133MHz in Quad I/O mode, enabling execute-in-place (XIP) operation for direct code execution without shadowing to RAM. The uniform 256KB sector architecture simplifies software management, while the 256-byte programming buffer enables efficient page programming. Housed in a compact PG-WSON-8 (DFN-8, 6x8mm) leadless package with only 0.55mm profile, the device is ideal for space-constrained applications. The AEC-Q100 qualification makes it suitable for automotive applications including infotainment and ADAS systems. Advanced features include persistent and volatile sector protection, a 1024-byte OTP area with lockable regions, and an AutoBoot feature that automatically outputs configured data after power-on for rapid system initialization.

Working Principle: S25FL128SAGNFA003 Working Principle

The S25FL128SAGNFA003 uses Infineon MirrorBit technology to store two bits per memory cell by independently controlling charge placement on two distinct regions of the floating gate, doubling density compared to single-bit NOR Flash. The SPI interface serializes all commands, addresses, and data through a minimum of 4 signal lines (SI, SO, SCK, CS) in Single I/O mode, with additional data lines (WP#/IO2, HOLD#/IO3) repurposed for Dual and Quad I/O modes. In Quad I/O mode at 133MHz, the effective data throughput reaches 532Mbps, enabling XIP operation. The device operates through a command-based protocol: the host asserts CS, clocks in an opcode followed by address bytes, then reads or writes data. The Write State Machine handles internal programming and erase algorithms including high-voltage generation and verification. The AutoBoot feature stores a predefined address and read length in non-volatile configuration registers; upon power-on, the device automatically outputs this data without requiring host initialization, enabling faster system boot times.

Pin Description: S25FL128SAGNFA003 Pin Definition and Functions
Pin Name Type Function
1 CS# Input Active-low chip select; selects the device for SPI operations
2 SO/IO1 I/O Serial data output in Single SPI; I/O1 in Dual/Quad SPI modes
3 WP#/IO2 I/O Write protect in Single SPI; I/O2 in Quad SPI mode
4 VSS Power Ground reference
5 SI/IO0 I/O Serial data input in Single SPI; I/O0 in Dual/Quad SPI modes
6 SCK Input Serial clock input; controls timing of data transfer up to 133MHz
7 HOLD#/IO3 I/O Hold in Single SPI; I/O3 in Quad SPI mode
8 VDD Power Power supply (2.7V to 3.6V)
Application Scenarios: In which products and applications is S25FL128SAGNFA003 used
  • Automotive Infotainment: Stores navigation maps, multimedia content, and firmware with AEC-Q100 qualification and 20-year data retention ensuring automotive reliability.
  • ADAS Systems: Provides reliable non-volatile code storage for advanced driver assistance ECUs with XIP capability for rapid code execution.
  • Industrial Control: Stores PLC firmware and configuration with advanced sector protection preventing accidental corruption during field updates.
  • Networking Equipment: Enables fast boot with AutoBoot feature and stores router firmware with Quad SPI throughput for rapid code access.
  • Embedded XIP: Executes code directly from Flash at 133MHz Quad I/O, eliminating RAM shadowing and reducing BOM cost.
Alternative Models: What chips are recommended as replacements for S25FL128SAGNFA003
Manufacturer Part Number Package Density Notes
Infineon S25FL256SAGNFI000 PG-WSON-8 256Mbit Same family, double density, pin-compatible
Infineon S25FL128SAGBHI200 16-SOIC 128Mbit SOIC package variant
Macronix MX25L12835F WSON-8 128Mbit Pin-compatible alternative
Winbond W25Q128JVS SOIC-8 128Mbit Industry-standard alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1