Opens in a new tab

MX25L8006EZNI-12G

8Mbit SPI/Dual-O NOR Flash, 86MHz, 2.7-3.6V, 8-WSON(6×5), -40~85°C

5800

Effective Inventory

Image for reference only

Manufacturer Part:

MX25L8006EZNI-12G

Package:

8-WSON (6x5mm), Exposed Pad

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MX25L8006EZNI-12G is an 8Mbit Serial NOR Flash memory from Macronix’s MX25L8006E series. It supports Standard SPI and Dual Output (1I/2O) interfaces with a maximum clock frequency of 86MHz. The device operates from 2.7V to 3.6V and is housed in a compact 8-WSON (6x5mm) surface-mount package with an exposed pad for thermal enhancement.

Key Specifications

Memory Density 8Mbit (1MB)
Organization 1M x 8 / 4M x 2
Interface SPI, Dual Output (1I/2O)
Clock Frequency 86 MHz
Supply Voltage 2.7V to 3.6V
Sector Structure 4KB (256 sectors)
Block Structure 64KB
Page Size 256 bytes
Byte Program Time 50μs typical
Page Program Time 3ms typical
Sector/Page Erase Time 15s/300ms (chip/sector)
Endurance 100,000 cycles
Data Retention 20 years
Package 8-WSON (6x5mm)
Operating Temperature -40°C to +85°C

Features

  • Dual Output mode (1I/2O) for 2x read throughput
  • 86MHz clock rate with DC to 86MHz operation
  • 4KB sector and 64KB block erase architecture
  • 512-bit OTP (One-Time Programmable) area
  • Security register for unique identification
  • Byte program capability
  • Deep power-down mode (25μA typical standby)

Applications

  • Embedded system boot code storage
  • BIOS/UEFI firmware storage
  • Industrial automation program storage
  • Networking equipment firmware
  • Consumer electronics configuration data
Product Introduction: MX25L8006EZNI-12G Product Introduction

The MX25L8006EZNI-12G is an 8Mbit Serial NOR Flash memory from Macronix’s MX25L8006E series, supporting Standard SPI and Dual Output (1I/2O) read modes. With a maximum clock frequency of 86MHz and 8ns access time, it provides fast read performance for boot code and firmware storage. The 4KB sector and 64KB block erase architecture offers flexible erase granularity, while the 256-byte page program buffer enables efficient write operations. The device includes 512-bit OTP area and a security register for unique device identification, making it suitable for secure boot applications.

Working Principle: MX25L8006EZNI-12G Working Principle

The MX25L8006E operates as a SPI-interfaced non-volatile memory. The host accesses the flash through a standard 4-wire SPI bus (CS#, SCK, SI, SO). In Dual Output mode, data is output on both SI and SO pins simultaneously, doubling read throughput. Memory is organized into 256 sectors of 4KB each, with larger 64KB block erase available for faster bulk operations. Programming is performed on a 256-byte page basis: the host writes data into an internal page buffer, then issues a Page Program command which triggers an internal high-voltage program operation that completes within 3ms. Erase operations set all bits in the selected sector or block to ‘1’. The device enters deep power-down mode when the DP instruction is issued, reducing standby current to 25μA.

Pin Description: MX25L8006EZNI-12G Pin Definition and Functions
Pin Name Function
1 CS# Chip Select (active low)
2 SO (IO1) Serial Data Output / Dual Output
3 WP# Write Protect (active low)
4 VSS Ground
5 SI (IO0) Serial Data Input / Dual Input
6 SCK Serial Clock
7 HOLD# Suspend/Resume (active low)
8 VCC Power Supply (2.7-3.6V)

EP: Exposed Pad (connect to VSS or leave floating)

Application Scenarios: In which products and applications is MX25L8006EZNI-12G used
  • Embedded MCU/SoC boot code and firmware storage
  • BIOS/UEFI SPI flash for PC and server platforms
  • Industrial PLC and motor drive program storage
  • Networking router/switch firmware and configuration
  • Set-top box and digital TV system flash
Alternative Models: What chips are recommended as replacements for MX25L8006EZNI-12G
Manufacturer Part Number Density Notes
Winbond W25Q80DV 8Mbit SPI/Dual/Quad, wider compatibility
ISSI IS25LP080D 8Mbit SPI/Dual/Quad NOR Flash
GigaDevice GD25Q80C 8Mbit SPI/Dual/Quad NOR Flash

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1