Opens in a new tab

KSZ8081RNBIA

10/100 Ethernet PHY with RMII, 3.3V single supply, on-chip termination, 32-QFN

8742

Effective Inventory

Image for reference only

Manufacturer Part:

KSZ8081RNBIA

Package:

32-QFN (5×5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Microchip KSZ8081RNBIA is a single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver (PHY) with RMII v1.2 interface support. Housed in a 32-pin QFN (5×5 mm) package, it integrates on-chip termination resistors for differential pairs and a low-noise 1.2V core regulator, reducing board cost and simplifying layout. It operates from a single 3.3V supply with configurable 1.8V/2.5V/3.3V digital I/O voltage support across the industrial temperature range of -40°C to +85°C.

Key Specifications

Standard IEEE 802.3 10/100 Ethernet
MAC Interface RMII v1.2 (MII on MNX variant)
Port Speed 10/100 Mbps
Supply Voltage 3.3V (single supply)
Digital I/O Voltage 1.8V / 2.5V / 3.3V
On-Chip Termination Yes
Auto MDI/MDI-X Yes (HP Auto MDIX)
Cable Diagnostics LinkMD TDR-based
Operating Temperature -40°C to +85°C
Package 32-QFN (5×5 mm)

Features

  • Single-chip IEEE 802.3 compliant 10/100 Ethernet PHY transceiver
  • RMII v1.2 with 50MHz reference clock output to MAC
  • On-chip termination resistors for differential pairs reduce BOM
  • Integrated 1.2V low-noise core regulator
  • HP Auto MDI/MDI-X for automatic crossover detection
  • LinkMD TDR-based cable diagnostics for fault identification
  • Programmable interrupt output and LED indicators
  • Power-down and power-saving modes for low-power operation
  • HBM ESD rating of 6 kV

Applications

  • Industrial Ethernet and factory automation
  • IP phones and VoIP gateways
  • IP set-top boxes and smart TVs
  • Game consoles and consumer electronics
  • Printers and networked peripherals
  • LAN on Motherboard (LOM) designs
Product Introduction: KSZ8081RNBIA Product Introduction

The Microchip KSZ8081RNBIA is a highly integrated single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver designed for transmission and reception of data over standard CAT-5 UTP cable. It reduces board cost and simplifies layout by integrating on-chip termination resistors for the differential pairs and a low-noise regulator to supply the 1.2V core. The RMII v1.2 interface provides direct connection to RMII-compliant MACs in Ethernet processors and switches. A 25MHz crystal generates all required clocks, including the 50MHz RMII reference clock output for the MAC. The KSZ8081RNBIA is ideal for industrial, consumer, and embedded networking applications requiring reliable 10/100 Ethernet connectivity.

Working Principle: KSZ8081RNBIA Working Principle

The KSZ8081RNBIA operates as a physical-layer transceiver bridging the MAC layer and the physical Ethernet medium. 1) RMII Interface Subsystem: The Reduced Media Independent Interface connects to the MAC via a 2-bit wide data bus with a 50MHz reference clock, enabling compact designs with fewer signal lines than MII. 2) PHY Core Subsystem: The 100BASE-TX PCS/PMA performs 4B/5B encoding/decoding, MLT-3 scrambling/descrambling, and digital signal processing for transmit and receive data streams. 3) Analog Front-End Subsystem: Integrated termination resistors and line drivers/receivers interface directly with the magnetics and RJ-45 connector for the copper medium. 4) Management Subsystem: The MDC/MDIO serial management interface provides register-level access for configuration, status monitoring, and LinkMD cable diagnostics using TDR technology.

Pin Description: KSZ8081RNBIA Pin Definition and Functions
Pin Name Type Function
1 VDDA_3.3 Power 3.3V analog supply
2 TXP Output Positive transmit differential pair
3 TXM Output Negative transmit differential pair
4 RXP Input Positive receive differential pair
5 RXM Input Negative receive differential pair
6 VDDRCV_3.3 Power 3.3V receive analog supply
7 RBIAS Analog Bias resistor connection
8 XTAL1 Input 25MHz crystal input
9 XTAL2/CLKIN Output Crystal output / external clock input
10 RST# Input Active-low reset
11-22 RMII/MDC/MDIO/LED I/O RMII data, management, and LED pins
23 INTRP Output Programmable interrupt output
24-32 VDD/GND/CFG Power/Config Power, ground, and configuration strap pins
Application Scenarios: In which products and applications is KSZ8081RNBIA used
  • Industrial Ethernet: Factory automation and process control communication nodes
  • Consumer Electronics: IP set-top boxes, smart TVs, and game consoles
  • Networking Peripherals: Printers, IP phones, and VoIP gateways
  • Embedded Systems: LAN on Motherboard (LOM) for server and embedded platforms
  • IoT Gateways: 10/100 Ethernet connectivity for IoT edge devices
Alternative Models: What chips are recommended as replacements for KSZ8081RNBIA
Manufacturer Part Number Package Notes
Realtek RTL8201F-VB-CG QFN-32 10/100 PHY, RMII, similar footprint
Microchip KSZ8041NL LQFP-48 10/100 PHY with MII interface
TI DP83848C LQFP-48 10/100 PHY, MII/RMII, industrial temp
Microchip KSZ8081MNX QFN-32 MII variant of same family
ADI ADIN1300 QFN-40 10/100/1000 PHY, higher performance

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1