Opens in a new tab

MIC2025-1YM TR

Single-channel 500mA high-side power switch, 2.7-5.5V, USB, SOIC-8

6329

Effective Inventory

Image for reference only

Manufacturer Part:

MIC2025-1YM TR

Package:

8-SOIC (4.93 x 3.94 x 1.48 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Microchip MIC2025-1YM TR is a single-channel high-side MOSFET power distribution switch optimized for USB power applications. Housed in an 8-pin SOIC package, it features 140mOhm maximum on-resistance, 500mA minimum continuous output current, and an operating voltage range of 2.7V to 5.5V. The device integrates short-circuit protection with thermal shutdown, a fault status flag with 3ms deglitch filter, undervoltage lockout, and soft-start circuitry for inrush current limiting during hot-plug events.

Key Specifications

Switch Type Single-channel high-side N-Channel MOSFET
On-Resistance 140mOhm max
Continuous Output Current 500mA min
Operating Voltage 2.7V to 5.5V
Fault Protection Current limiting, thermal shutdown, UVLO
Fault Flag Active-low, open-drain with 3ms filter
Soft Start Yes
Operating Temperature -40°C to +85°C
Package 8-SOIC

Features

  • 140mOhm maximum on-resistance
  • 2.7V to 5.5V operating voltage range
  • 500mA minimum continuous output current
  • Short-circuit protection with thermal shutdown
  • Fault status flag with 3ms filter eliminates false assertions
  • Undervoltage lockout (UVLO)
  • Reverse current flow blocking (no body diode)
  • Logic-compatible enable input
  • Soft-start circuit minimizes inrush current
  • Low quiescent current
  • Pin-compatible with MIC2525

Applications

  • USB peripherals and port power switching
  • General purpose power distribution
  • ACPI power distribution in notebook PCs
  • PDAs and portable devices
  • PC card hot-swap applications
Product Introduction: MIC2025-1YM TR Product Introduction

The Microchip MIC2025-1YM TR is a single-channel high-side MOSFET power distribution switch optimized for general-purpose power distribution requiring circuit protection. It is internally current limited and features thermal shutdown that protects the device and load. When a thermal shutdown fault occurs, the output is latched off until the faulty load is removed. Removing the load or toggling the enable input resets the device output. The device employs soft-start circuitry that minimizes inrush current in applications where highly capacitive loads are employed, making it ideal for USB power distribution and hot-plug applications.

Working Principle: MIC2025-1YM TR Working Principle

The MIC2025-1YM TR operates as a high-side power switch between the input supply and the load. 1) Power Switch Subsystem: An internal N-Channel MOSFET with charge pump provides the low-resistance path from VIN to VOUT, with 140mOhm maximum on-resistance. 2) Current Limit Subsystem: A sense circuit monitors output current, limiting it to a safe preset level during overcurrent or short-circuit conditions. 3) Thermal Protection Subsystem: An on-die temperature sensor triggers shutdown when junction temperature exceeds the threshold, latching the output off until the fault is cleared. 4) Fault Flag Subsystem: An open-drain FLG output is asserted after a 3ms deglitch delay during overcurrent or thermal events, filtering out transient false triggers during hot-plug inrush.

Pin Description: MIC2025-1YM TR Pin Definition and Functions
Pin Name Type Function
1 EN Input Switch enable (active-high for -1 variant)
2 FLG Output Fault flag (active-low, open-drain)
3 GND Power Ground
4 NC – No connect
5 NC – No connect
6 IN Power Input supply (2.7V to 5.5V)
7 OUT Power Output to load (up to 500mA)
8 GND Power Ground
Application Scenarios: In which products and applications is MIC2025-1YM TR used
  • USB Power Distribution: Port power switching in USB hosts and hubs per USB specification
  • Notebook PCs: ACPI power distribution for peripheral subsystems
  • Hot-Swap Applications: Inrush current limiting for PC card insertion events
  • Portable Devices: PDA and handheld power management
  • General Purpose Switching: Any system requiring protected power distribution
Alternative Models: What chips are recommended as replacements for MIC2025-1YM TR
Manufacturer Part Number Package Notes
Microchip MIC2075-1YM SOIC-8 Smart thermal shutdown variant
Microchip MIC2525 MSOP-8 Pin-compatible, dual-channel
TI TPS2041 SOIC-8 500mA power switch, USB
onsemi NCP380 DFN-8 500mA power switch with current limit
Microchip MIC2025-1YMM MSOP-8 Same function, MSOP package

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1