Opens in a new tab

MIC2026A-1YM-TR

Dual-channel 500mA high-side power switch, 2.7-5.5V, SOIC-8

7894

Effective Inventory

Image for reference only

Manufacturer Part:

MIC2026A-1YM-TR

Package:

8-SOIC (4.93 x 3.94 x 1.48 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Microchip MIC2026A-1YM-TR is a dual-channel high-side MOSFET power distribution switch in an 8-pin SOIC package. Each channel provides 500mA continuous output current with 140mOhm maximum on-resistance per channel. Operating from 2.7V to 5.5V, it features thermally isolated channels, short-circuit protection, undervoltage lockout, reverse current blocking, and soft-start circuitry. The device is optimized for USB power distribution and general-purpose power switching applications.

Key Specifications

Switch Type Dual-channel high-side N-Channel MOSFET
On-Resistance 140mOhm max per channel
Continuous Output Current 500mA min per channel
Operating Voltage 2.7V to 5.5V
Number of Outputs 2
Fault Protection Current limiting, thermal shutdown, UVLO
Operating Temperature -40°C to +85°C
Package 8-SOIC

Features

  • 140mOhm maximum on-resistance per channel
  • 500mA minimum continuous current per channel
  • Thermally isolated channels for independent operation
  • Short-circuit protection with thermal shutdown
  • Fault status flag with 3ms filter eliminates false assertions
  • Undervoltage lockout (UVLO)
  • Reverse current flow blocking (no body diode)
  • Logic-compatible inputs
  • Soft-start circuit minimizes inrush current
  • Low quiescent current
  • Pin-compatible with MIC2526

Applications

  • USB peripherals with dual port power switching
  • General purpose dual-channel power distribution
  • ACPI power distribution in notebook PCs
  • PC card hot-swap applications
  • Wearable and portable devices
Product Introduction: MIC2026A-1YM-TR Product Introduction

The Microchip MIC2026A-1YM-TR is a dual-channel high-side MOSFET power distribution switch optimized for general-purpose power distribution requiring circuit protection. Each channel is internally current limited and features thermal shutdown that protects the device and load. The thermally isolated channels allow independent operation without cross-thermal interference. Both channels employ soft-start circuitry that minimizes inrush current during hot-plug events. A fault status output flag is asserted during overcurrent and thermal shutdown conditions, with transient faults internally filtered by a 3ms deglitch timer.

Working Principle: MIC2026A-1YM-TR Working Principle

The MIC2026A-1YM-TR operates as a dual-channel high-side power switch. 1) Power Switch Subsystem: Two independent N-Channel MOSFETs with charge pumps provide low-resistance paths from VIN to each VOUT, with 140mOhm max on-resistance per channel. 2) Current Limit Subsystem: Each channel monitors output current independently, entering constant-current mode during overcurrent or short-circuit events. 3) Thermal Protection Subsystem: Thermally isolated channels feature independent temperature sensors; each channel cycles off at its thermal limit and resets when the junction cools to 120°C. 4) Fault Reporting Subsystem: A shared FLG output with 3ms deglitch filter reports faults from either channel, eliminating false assertions during transient inrush events.

Pin Description: MIC2026A-1YM-TR Pin Definition and Functions
Pin Name Type Function
1 ENA Input Channel A enable (active-high)
2 FLGA Output Channel A fault flag (active-low, open-drain)
3 FLGB Output Channel B fault flag (active-low, open-drain)
4 IN Power Input supply (2.7V to 5.5V)
5 OUTA Power Channel A output to load
6 OUTB Power Channel B output to load
7 GND Power Ground
8 ENB Input Channel B enable (active-high)
Application Scenarios: In which products and applications is MIC2026A-1YM-TR used
  • USB Dual Port Power: Simultaneous switching of two USB port power supplies
  • Notebook PCs: Dual-channel ACPI power distribution
  • Portable Devices: Power management in wearables and GPS devices
  • Wireless Modems: Power switching for wireless communication cards
  • Industrial Control: General purpose protected power switching
Alternative Models: What chips are recommended as replacements for MIC2026A-1YM-TR
Manufacturer Part Number Package Notes
Microchip MIC2076A-1YM-TR SOIC-8 Circuit breaker mode variant
Microchip MIC2526 MSOP-10 Dual-channel, pin-compatible upgrade
TI TPS2042 SOIC-8 Dual 500mA power switch
onsemi NCP382 DFN-10 Dual power switch with current limit
Microchip MIC2026A-2YM-TR SOIC-8 Active-low enable variant

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1