Opens in a new tab

Home » Integrated Circuits ICs » AT25512-TH-B

AT25512-TH-B

512Kb SPI Serial EEPROM, 64Kx8, 20MHz, 1.8-5.5V, TSSOP-8

7843

Effective Inventory

Image for reference only

Manufacturer Part:

AT25512-TH-B

Package:

8-TSSOP (3.1 x 4.5 x 1.2 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Microchip AT25512-TH-B is a 512Kb SPI Serial EEPROM organized as 64K x 8, housed in an 8-pin TSSOP package. Operating from 1.8V to 5.5V with a 20MHz maximum clock frequency, it supports SPI modes 0 and 3. The device features block write protection (1/4, 1/2, or entire array), hardware write protect pin, self-timed write cycles (5ms max), 1 million erase/write cycle endurance, and 100-year data retention over the industrial temperature range of -40°C to +85°C.

Key Specifications

Density 512 Kbit (64K x 8)
Interface SPI (modes 0 and 3)
Max Clock Frequency 20 MHz
Operating Voltage 1.8V to 5.5V
Page Size 128 bytes
Write Cycle Time 5 ms max (self-timed)
Endurance 1,000,000 write cycles
Data Retention 100 years
Operating Temperature -40°C to +85°C
Package 8-TSSOP (3.1 x 4.5 mm)

Features

  • 512Kb SPI serial EEPROM with 64K x 8 organization
  • Supports SPI modes 0 and 3
  • Up to 20MHz clock frequency
  • Block write protection: 1/4, 1/2, or entire array
  • Hardware write protect pin for status register protection
  • Self-timed erase and write cycles (5ms max)
  • More than 1 million erase/write cycles
  • 100-year data retention
  • Low standby current: 3uA max at 1.8V
  • Factory programming available

Applications

  • Consumer electronics parameter storage
  • Industrial control system configuration
  • Medical device calibration data
  • Automotive electronics (qualified versions available)
  • Embedded system boot and configuration storage
Product Introduction: AT25512-TH-B Product Introduction

The Microchip AT25512-TH-B is a 512Kb Serial EEPROM utilizing the industry-standard SPI compatible serial bus. Organized as one block of 64K x 8 bits, the device is optimized for consumer electronics, industrial, medical, and automotive applications where reliable and dependable nonvolatile memory storage is essential. Software write protection allows the user to protect 1/4, 1/2, or the entire memory array, while a hardware write protect pin provides additional protection against inadvertent writes to the status register. Available in a compact 8-lead TSSOP package.

Working Principle: AT25512-TH-B Working Principle

The AT25512-TH-B communicates via the standard SPI serial bus. 1) SPI Interface Subsystem: The CS (Chip Select), SCK (Serial Clock), SI (Serial Input), and SO (Serial Output) pins implement the SPI protocol, supporting modes 0 and 3 with clock speeds up to 20MHz. 2) Memory Array Subsystem: The 512Kb EEPROM array is organized as 64K x 8 bits with 128-byte pages for efficient write operations. 3) Write Protection Subsystem: Block write protection is configured via the status register, allowing protection of 1/4, 1/2, or the full array; the WP pin provides hardware protection against status register modifications. 4) Self-Timed Write Subsystem: Internal high-voltage generator and timing circuit complete programming within 5ms, with busy status available via the status register or SO pin polling.

Pin Description: AT25512-TH-B Pin Definition and Functions
Pin Name Type Function
1 CS Input Chip select (active-low)
2 SO Output Serial data output (MISO)
3 WP Input Write protect (active-low protects status register)
4 VSS Power Ground
5 SI Input Serial data input (MOSI)
6 SCK Input Serial clock
7 HOLD Input Suspend serial communication (active-low)
8 VCC Power Supply voltage (1.8-5.5V)
Application Scenarios: In which products and applications is AT25512-TH-B used
  • Industrial Systems: Process controller parameter and calibration storage
  • Consumer Electronics: Feature settings and user preferences
  • Medical Devices: Patient data and device calibration retention
  • Automotive: Available in AEC-Q100 qualified grade for vehicle electronics
  • Embedded Systems: Boot configuration, serial numbers, and firmware data
Alternative Models: What chips are recommended as replacements for AT25512-TH-B
Manufacturer Part Number Package Notes
Microchip AT25128B-TH-B TSSOP-8 128Kb, same family, quarter density
ST M95256-DRMN6TP TSSOP-8 256Kb SPI EEPROM
onsemi CAT25512 TSSOP-8 512Kb SPI EEPROM, compatible
ROHM BR25H512 TSSOP-8 512Kb SPI EEPROM
Microchip AT25512-NSH-B SOIC-8 Same function, SOIC package

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1