Opens in a new tab

NB6381DL-LF-Z

8A, 28V synchronous step-down buck converter in QFN-20 (3x4mm), 200kHz-1MHz, COT control

7320

Effective Inventory

Image for reference only

Manufacturer Part:

NB6381DL-LF-Z

Package:

QFN-20 (3x4mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NB6381DL-LF-Z from Monolithic Power Systems (MPS) is a fully integrated, high-frequency synchronous rectified step-down (buck) switching mode converter. It delivers up to 8A of continuous output current across a wide 4.5V to 28V input range, housed in a compact QFN-20 (3x4mm) package. The device utilizes Constant-On-Time (COT) control for fast transient response and simplified loop stabilization.

Key Specifications

Input Voltage Range 4.5V to 28V
Output Voltage Range 0.8V to 13V (adjustable)
Output Current 8A continuous
Switching Frequency 200kHz to 1MHz
High-Side MOSFET Rds(on) 30mΩ
Low-Side MOSFET Rds(on) 12mΩ
Reference Voltage 815mV (1% accuracy)
Package QFN-20 (3x4mm)
Operating Temperature -40°C to +125°C

Features

  • Internal 30mΩ high-side and 12mΩ low-side power MOSFETs
  • Proprietary switching loss reduction technique
  • Programmable soft start and soft shutdown
  • Full protection: SCP, OCP, OVP, UVP, and thermal shutdown
  • Constant-On-Time (COT) control mode for fast transient response
  • Power Good output signal

Applications

  • Notebook systems and I/O power
  • Networking systems
  • Optical communication systems
  • Distributed power and POL (Point-of-Load) systems
Product Introduction: NB6381DL-LF-Z Product Introduction

The NB6381DL-LF-Z is a high-efficiency, fast-transient synchronous step-down converter from Monolithic Power Systems. Designed for space-constrained power applications, it integrates both high-side (30mΩ) and low-side (12mΩ) MOSFETs in a tiny QFN-20 (3x4mm) package, eliminating external MOSFET requirements. The converter supports a wide input range of 4.5V to 28V and delivers up to 8A of continuous current, making it ideal for notebook, networking, and POL power systems. The COT control architecture provides excellent transient response while easing loop compensation design.

Working Principle: NB6381DL-LF-Z Working Principle

1. Power Stage: Integrated high-side and low-side MOSFETs perform synchronous buck conversion, reducing conduction losses compared to diode rectification.
2. COT Control: Constant-On-Time control adjusts the off-time based on output voltage feedback, providing fast transient response without complex loop compensation.
3. Protection Subsystem: Over-current protection (OCP) monitors inductor current cycle-by-cycle; over-voltage (OVP) and under-voltage (UVP) comparators monitor the output; thermal shutdown activates at 150°C with 25°C hysteresis.
4. Soft Start/Shutdown: Programmable soft start limits inrush current; soft shutdown discharges the output capacitor gracefully.

Pin Description: NB6381DL-LF-Z Pin Definition and Functions
Pin Name Function
1 AGND Analog ground
2 VCC Internal 5V LDO output (bypass with 1uF cap)
3-5 IN Input voltage supply (4.5V-28V)
6 EN Enable input (active high)
7 BS High-side gate boost capacitor connection
8,9,10 SW Switching node (inductor connection)
11 FB Feedback input (reference 815mV)
12 SS Soft start capacitor input
13 PGOOD Power good open-drain output
14 R7/Ton On-time programming resistor input
15-20 PGND Power ground
Application Scenarios: In which products and applications is NB6381DL-LF-Z used
  • Notebook and laptop system power rails (1.05V, 1.2V, 1.5V, 1.8V, 3.3V, 5V)
  • Networking and telecom equipment POL converters
  • Optical communication module power supplies
  • Distributed power architectures in server and storage systems
  • Set-top box and digital TV power management
Alternative Models: What chips are recommended as replacements for NB6381DL-LF-Z
Manufacturer Part Number Package Notes
MPS NB639DL-LF-Z QFN-20 (3x4mm) 8A, 28V, higher switching freq option
MPS NB638DL-LF-Z QFN-20 (3x4mm) 7A version, same footprint
MPS MP8736 QFN-20 (3x4mm) 6A, 19V input, pin compatible
Texas Instruments TPS54320 QFN-16 3A, similar feature set
Analog Devices ADP2386 QFN-20 6A, 20V input synchronous buck

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1