Opens in a new tab

PESD15VS2UT

Dual unidirectional ESD protection diode, 15V VRWM, 40V clamp, 160W, >30kV, SOT-23, AEC-Q101

7350

Effective Inventory

Image for reference only

Manufacturer Part:

PESD15VS2UT

Package:

SOT-23 (2.9 x 1.3 x 1.0mm), 3-pin

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The PESD15VS2UT from Nexperia is a unidirectional double ESD protection diode in a SOT-23 package, designed to protect up to two signal lines from electrostatic discharge. With 15V reverse standoff voltage and 40V clamping voltage at 5A, it targets higher-voltage interfaces such as RS-232. The device provides ultra-low reverse leakage (<20nA), 30kV ESD protection (IEC 61000-4-2), and AEC-Q101 automotive qualification.

Key Specifications

Configuration Unidirectional, dual-line (2 channels)
Reverse Standoff Voltage (VRWM) 15V
Breakdown Voltage (VBR) 16.7V min, 17.6V typ (IT=1mA)
Clamping Voltage (VCL) 40V max (at IPP=5A)
Peak Pulse Power (PPP) 160W (8/20µs)
Peak Pulse Current (IPP) 5A (8/20µs)
Reverse Leakage (IRM) < 20 nA (at VRWM=15V)
ESD Protection > 30kV (IEC 61000-4-2 contact and air)
Package SOT-23, 3-pin (2.9 x 1.3 x 1.0mm)
Qualification AEC-Q101

Features

  • Dual-line unidirectional ESD protection in a single SOT-23 package
  • Ultra-low reverse leakage: <20nA at 15V
  • High ESD robustness: >30kV per IEC 61000-4-2
  • 15V working voltage ideal for RS-232 and high-voltage interfaces
  • AEC-Q101 qualified for automotive applications
  • Low clamping voltage: 40V at 5A peak pulse

Applications

  • RS-232 serial communication port protection
  • Parallel port and legacy interface ESD protection
  • Automotive CAN bus and proprietary high-voltage bus protection
  • Industrial control system I/O protection
  • High-speed data line surge suppression
Product Introduction: PESD15VS2UT Product Introduction

The PESD15VS2UT from Nexperia is a unidirectional dual-channel ESD protection diode housed in a SOT-23 surface-mount package. Designed to protect up to two signal lines simultaneously, it features a 15V reverse standoff voltage that makes it ideal for RS-232 and other higher-voltage communication interfaces. The device achieves ultra-low reverse leakage current of less than 20nA, minimizing power drain in always-on circuits. With 30kV ESD protection (IEC 61000-4-2) and 160W peak pulse power handling, it provides robust transient suppression. AEC-Q101 qualification ensures suitability for automotive applications including CAN bus and industrial communication networks.

Working Principle: PESD15VS2UT Working Principle

1. Dual-Line Architecture: The SOT-23 package contains two independent TVS diodes sharing a common ground pin (pin 3). Pins 1 and 2 each connect to a separate protected signal line, while pin 3 connects to the system ground.
2. Standoff Mode: During normal operation, both diodes are reverse-biased below the 15V standoff voltage. The ultra-low leakage (<20nA) ensures minimal impact on signal integrity and negligible power consumption.
3. Avalanche Clamping: When a transient exceeds the breakdown voltage (~17.6V), the diode enters avalanche breakdown, conducting the surge current to ground and clamping the line voltage to 40V maximum at 5A.
4. ESD Response: The fast-acting silicon avalanche technology responds within sub-nanosecond timescales to ESD events, clamping the transient before it can damage protected ICs.

Pin Description: PESD15VS2UT Pin Definition and Functions
Pin Name Function
1 I/O Line 1 Protected signal line 1 (cathode of diode 1)
2 I/O Line 2 Protected signal line 2 (cathode of diode 2)
3 GND Common ground (shared anode of both diodes)
Application Scenarios: In which products and applications is PESD15VS2UT used
  • RS-232 transceiver TX/RX line pair ESD protection in industrial equipment
  • Automotive CAN-H and CAN-L bus differential pair protection
  • Parallel port data bus protection in legacy industrial interfaces
  • Sensor analog input pair protection in automotive ECUs
  • Industrial PLC digital I/O module protection
Alternative Models: What chips are recommended as replacements for PESD15VS2UT
Manufacturer Part Number Package Notes
Nexperia PESD12VL2BT SOT-23 12V bidirectional version
Nexperia PESD24VS2UT SOT-23 24V VRWM for higher voltage buses
Nexperia PESD15VS2UAT SOT-23 Tighter tolerance version
onsemi NUP2105LT1G SOT-23 Dual bidirectional, 24V CAN bus
STMicroelectronics ESDCAN24-2BLY SOT-23 24V dual, CAN bus optimized

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1