Opens in a new tab

PCA82C251T

CAN transceiver for 24V systems, ISO 11898 compliant, 1MBaud, SO8, thermal protection, short-circuit proof

7265

Effective Inventory

Image for reference only

Manufacturer Part:

PCA82C251T

Package:

SO8 (SOT96-1) 5.0 x 4.0 x 1.75 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NXP PCA82C251T is a CAN transceiver for 24 V systems, serving as the interface between a CAN protocol controller and the physical bus. It is fully compatible with the ISO 11898-24V standard, supports speeds up to 1 MBaud, and provides differential transmit and receive capability with thermal protection and short-circuit proof outputs.

Key Specifications

Supply Voltage (VCC) 4.5 V to 5.5 V
Max Bit Rate 1 MBaud
Standard ISO 11898-24V
CANH/CANL Voltage Range -36 V to +36 V
ESD Protection ±2500 V (HBM)
Standby Current Low current mode
Min Nodes on Bus 110
Operating Temperature -40°C to +125°C
Package SO8 (SOT96-1)

Features

  • Fully compatible with ISO 11898-24V standard
  • Slope control to reduce RFI emissions
  • Thermally protected with reduced current at high temperature
  • Short-circuit proof to battery and ground in 24V systems
  • Low-current standby mode for power savings
  • Unpowered node does not disturb bus lines
  • At least 110 nodes can be connected

Applications

  • Truck and bus CAN networks
  • Industrial automation CAN bus systems
  • Automotive body and powertrain networks
  • 24V industrial communication systems
Product Introduction: PCA82C251T Product Introduction

The NXP PCA82C251T is a CAN transceiver designed for 24 V systems, serving as the interface between a CAN protocol controller and the physical bus. It is primarily intended for applications up to 1 MBaud in trucks and buses. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller. It is fully compatible with the ISO 11898-24V standard. A current-limiting circuit protects the transmitter output stage against short-circuits to positive and negative battery voltage. If the junction temperature exceeds approximately 160°C, the limiting current of both transmitter outputs is decreased, reducing power dissipation. The CANH and CANL lines are protected against electrical transients common in automotive environments.

Working Principle: PCA82C251T Working Principle

The PCA82C251T operates as a physical layer transceiver between the CAN controller (digital side) and the CAN bus (analog differential side). On the transmit path, the TXD input from the CAN controller drives the bus output stage, which generates differential signals on CANH and CANL. In dominant state, CANH goes HIGH and CANL goes LOW; in recessive state, both lines float. On the receive path, the differential comparator monitors CANH-CANL voltage and outputs the result on RXD. Pin 8 (Rs) provides three operating modes: High-speed (Rs to GND), Slope control (Rs via resistor to GND for RFI reduction), and Standby (Rs HIGH for low-current mode). Thermal protection reduces transmitter current when junction temperature exceeds ~160°C. A current-limiting circuit protects against short-circuits to ±36V.

Pin Description: PCA82C251T Pin Definition and Functions
Pin Name Type Function
1 TXD Input Transmit data input (from CAN controller)
2 GND Power Ground
3 VCC Power Supply voltage (4.5-5.5V)
4 RXD Output Receive data output (to CAN controller)
5 Vref Output Reference voltage output (VCC/2)
6 CANL I/O LOW-level CAN bus voltage input/output
7 CANH I/O HIGH-level CAN bus voltage input/output
8 Rs Input Slope resistor input / mode selection
Application Scenarios: In which products and applications is PCA82C251T used
  • Truck and bus CAN bus communication networks
  • 24V industrial automation CAN systems
  • Automotive body control modules
  • Heavy machinery and equipment CAN networks
  • Marine and agricultural vehicle CAN systems
Alternative Models: What chips are recommended as replacements for PCA82C251T
Manufacturer Part Number Package Notes
Texas Instruments SN65HVD234 SOIC-8 Similar CAN transceiver, 5V supply
onsemi AMIS-42675 SOIC-8 CAN transceiver for 24V systems
STMicroelectronics L9615B SO-8 ISO 11898 compliant CAN transceiver
NXP TJA1042T SO8 Newer generation CAN transceiver
NXP TJA1055T SO8 Fault-tolerant CAN transceiver, 24V

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1