Opens in a new tab

74HC595D

8-bit serial-in/parallel-out shift register with output latches, 3-state, 2.0-6.0V, SO16, cascading

12048

Effective Inventory

Image for reference only

Manufacturer Part:

74HC595D

Package:

SO16 (SOT109-1) 10.0 x 3.9 x 1.75 mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Nexperia 74HC595D is an 8-bit serial-in/parallel-out shift register with output latches and 3-state outputs in an SO16 package. It operates from 2.0 V to 6.0 V, features a storage register with 3-state outputs, and supports cascading for expanding output ports via serial communication.

Key Specifications

Supply Voltage (VCC) 2.0 V to 6.0 V
Logic Family 74HC (CMOS)
Shift Register Width 8 bits
Max Clock Frequency 25 MHz (at 4.5V)
Output Type 3-state (via OE)
Output Drive ±5.2 mA
Propagation Delay 13 ns (typical at 4.5V)
Operating Temperature -40°C to +125°C
ESD Protection HBM >2000V, CDM >1000V

Features

  • 8-bit serial-in parallel-out shift register with output latches
  • 3-state outputs for bus-oriented applications
  • Serial output for cascading multiple devices
  • Direct clear (SRCLR) for shift register reset
  • Wide supply voltage range from 2.0 V to 6.0 V
  • CMOS low power dissipation with high noise immunity

Applications

  • LED display driver and multiplexing
  • Serial-to-parallel data conversion
  • Output port expansion for microcontrollers
  • Cascaded display systems
Product Introduction: 74HC595D Product Introduction

The Nexperia 74HC595D is an 8-bit serial-in parallel-out shift register with output latches and 3-state outputs in an SO16 package. The device contains an 8-bit shift register that feeds an 8-bit storage register. The shift register has a serial data input (SER), a serial output (Q7′) for cascading, and a serial clock input (SRCLK). The storage register has a parallel 8-bit output and a storage clock input (RCLK). The active LOW output enable input (OE) controls the 3-state outputs. When OE is HIGH, the outputs are in a high-impedance state. The active LOW shift register clear (SRCLR) can reset the shift register independently of the storage register. The device operates from 2.0V to 6.0V with ±5.2 mA output drive and is specified from -40°C to +125°C.

Working Principle: 74HC595D Working Principle

The 74HC595D operates in two stages: a shift register and a storage register. Data is shifted into the 8-bit shift register on each rising edge of the shift clock (SRCLK) via the serial data input (SER). After 8 clock cycles, the shifted data can be transferred to the storage register by applying a rising edge to the storage clock (RCLK). This two-stage architecture allows new data to be shifted in while the previous data remains stable on the outputs. The serial output (Q7′) provides the last bit of the shift register for cascading to subsequent 74HC595 devices. The active LOW output enable (OE) controls the 3-state output buffers — when HIGH, all outputs are high-impedance. The active LOW shift register clear (SRCLR) resets the shift register to all zeros without affecting the storage register. Multiple devices can be cascaded by connecting Q7′ to the SER of the next device.

Pin Description: 74HC595D Pin Definition and Functions
Pin Name Type Function
1 Q1 Output Storage register output bit 1
2 Q2 Output Storage register output bit 2
3 Q3 Output Storage register output bit 3
4 Q4 Output Storage register output bit 4
5 Q5 Output Storage register output bit 5
6 Q6 Output Storage register output bit 6
7 Q7 Output Storage register output bit 7
8 GND Power Ground (0 V)
9 Q7′ Output Serial output from shift register (for cascading)
10 SRCLR Input Shift register clear (active LOW)
11 SRCLK Input Shift register clock input
12 RCLK Input Storage register clock (latch) input
13 OE Input Output enable input (active LOW, 3-state)
14 SER Input Serial data input
15 Q0 Output Storage register output bit 0
16 VCC Power Supply voltage
Application Scenarios: In which products and applications is 74HC595D used
  • LED matrix and 7-segment display driver circuits
  • Serial-to-parallel data conversion in embedded systems
  • Output port expansion for microcontrollers with limited GPIO
  • Cascaded display systems for large LED panels
  • Industrial control relay driver arrays
Alternative Models: What chips are recommended as replacements for 74HC595D
Manufacturer Part Number Package Notes
Texas Instruments SN74HC595D SOIC-16 Pin-to-pin compatible
onsemi MC74HC595ADTR2G TSSOP-16 Equivalent function
Microchip MM74HC595MTCX TSSOP-16 Equivalent function
Nexperia 74HCT595D SO16 TTL input level variant
Nexperia 74HC595PW TSSOP16 Same function, TSSOP package

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1