Opens in a new tab

74HC165D

8-bit parallel-in/serial-out shift register, complementary outputs, 2.0-6.0V, SO16, cascading capable

8473

Effective Inventory

Image for reference only

Manufacturer Part:

74HC165D

Package:

SO16 (SOT109-1) 10.0 x 3.9 x 1.75 mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Nexperia 74HC165D is an 8-bit parallel-in/serial-out shift register in an SO16 package. It features both parallel and serial load capability, complementary serial outputs, and an active LOW clock enable. The device operates from 2.0 V to 6.0 V and is ideal for parallel-to-serial data conversion.

Key Specifications

Supply Voltage (VCC) 2.0 V to 6.0 V
Logic Family 74HC (CMOS)
Shift Register Width 8 bits
Max Clock Frequency 25 MHz (at 4.5V)
Propagation Delay 13 ns (typical at 4.5V)
Output Drive ±5.2 mA
Operating Temperature -40°C to +125°C

Features

  • 8-bit parallel-in serial-out shift register
  • Parallel load via active LOW SH/LD input
  • Complementary serial outputs (Q7 and Q7′)
  • Active LOW clock enable (CLK INH) for clock gating
  • Serial data input for cascading multiple devices
  • Wide supply voltage range from 2.0 V to 6.0 V

Applications

  • Parallel-to-serial data conversion
  • Input port expansion for microcontrollers
  • Keyboard and switch matrix scanning
  • Sensor data acquisition with serial output
Product Introduction: 74HC165D Product Introduction

The Nexperia 74HC165D is an 8-bit parallel-in serial-out shift register in an SO16 package. The device features 8 parallel data inputs (D0-D7), a serial data input (DS) for cascading, and complementary serial outputs (Q7 and Q7′). The active LOW shift/load input (SH/LD) controls the operation mode: when LOW, parallel data is loaded into the register asynchronously; when HIGH, data is shifted serially on each rising edge of the clock (CLK). The active LOW clock inhibit input (CLK INH) can be used to gate the clock signal. The device operates from 2.0V to 6.0V with ±5.2 mA output drive and is specified from -40°C to +125°C. Multiple devices can be cascaded by connecting the Q7 output to the DS input of the next device.

Working Principle: 74HC165D Working Principle

The 74HC165D operates in two modes controlled by the SH/LD pin. In load mode (SH/LD = LOW), all 8 parallel inputs (D0-D7) are asynchronously loaded into the internal 8-bit shift register, regardless of the clock state. In shift mode (SH/LD = HIGH), the loaded data is shifted serially out through the Q7 output on each rising edge of the clock (CLK). The complementary output Q7′ provides the inverted serial data. The clock inhibit input (CLK INH) can freeze the shifting by being driven HIGH, effectively gating the clock. For cascading, the serial data input (DS) allows data from a previous stage to be shifted in, enabling 16-bit, 24-bit, or larger shift register chains. The internal register is a master-slave configuration that ensures reliable data shifting at frequencies up to 25 MHz.

Pin Description: 74HC165D Pin Definition and Functions
Pin Name Type Function
1 SH/LD Input Shift/load control (LOW=load, HIGH=shift)
2 CLK Input Clock input (rising edge shifts)
3 D4 Input Parallel data input bit 4
4 D5 Input Parallel data input bit 5
5 D6 Input Parallel data input bit 6
6 D7 Input Parallel data input bit 7
7 Q7 Output Serial output (non-inverted)
8 GND Power Ground (0 V)
9 Q7′ Output Serial output (complementary)
10 DS Input Serial data input (for cascading)
11 D0 Input Parallel data input bit 0
12 D1 Input Parallel data input bit 1
13 D2 Input Parallel data input bit 2
14 D3 Input Parallel data input bit 3
15 CLK INH Input Clock inhibit (active LOW)
16 VCC Power Supply voltage
Application Scenarios: In which products and applications is 74HC165D used
  • Parallel-to-serial data conversion for microcontroller inputs
  • Input port expansion for GPIO-limited microcontrollers
  • Keyboard and switch matrix scanning circuits
  • Multi-channel sensor data acquisition with serial readout
  • Cascaded input shift register chains for industrial I/O
Alternative Models: What chips are recommended as replacements for 74HC165D
Manufacturer Part Number Package Notes
Texas Instruments SN74HC165D SOIC-16 Pin-to-pin compatible
onsemi MC74HC165ADR2G SOIC-16 Equivalent function
Toshiba TC74HC165AP DIP-16 Equivalent function
Nexperia 74HCT165D SO16 TTL input level variant
Nexperia 74HC165PW TSSOP16 Same function, TSSOP package

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1