Opens in a new tab

74HC153D

Dual 4-to-1 multiplexer, common select, individual strobe, 2.0-6.0V, SO16, non-inverting, ±5.2mA

5847

Effective Inventory

Image for reference only

Manufacturer Part:

74HC153D

Package:

SO16 (SOT109-1) 10.0 x 3.9 x 1.75 mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Nexperia 74HC153D is a dual 4-input multiplexer in an SO16 package. It features two independent 4-to-1 multiplexers with common select inputs, individual strobe (enable) controls, and operates from 2.0 V to 6.0 V. Ideal for data routing and selection in digital systems.

Key Specifications

Supply Voltage (VCC) 2.0 V to 6.0 V
Logic Family 74HC (CMOS)
Configuration Dual 4-to-1 multiplexer
Propagation Delay 14 ns (typical at 4.5V)
Output Drive ±5.2 mA
Select Inputs 2 (common to both multiplexers)
Strobe Inputs 2 (active LOW, one per multiplexer)
Operating Temperature -40°C to +125°C

Features

  • Dual 4-to-1 multiplexer with common select inputs
  • Individual active LOW strobe (enable) for each multiplexer
  • Non-inverting data path
  • Wide supply voltage range from 2.0 V to 6.0 V
  • CMOS low power dissipation with high noise immunity
  • Complies with JEDEC standards

Applications

  • Data routing and selection in digital systems
  • Parallel-to-serial conversion
  • Function generation circuits
  • Bus multiplexing in microprocessor systems
Product Introduction: 74HC153D Product Introduction

The Nexperia 74HC153D is a dual 4-input multiplexer in an SO16 package. The device contains two independent 4-to-1 multiplexers that share common select inputs (S0 and S1). Each multiplexer has four data inputs (nI0 to nI3), an active LOW strobe input (nOE), and a single output (nY). The select inputs determine which of the four data inputs is connected to the output. When the strobe is HIGH, the corresponding output is forced LOW regardless of the data inputs. The device operates from 2.0V to 6.0V with ±5.2 mA output drive and non-inverting data path. It is specified from -40°C to +125°C and complies with JEDEC standards.

Working Principle: 74HC153D Working Principle

The 74HC153D implements two independent 4-to-1 multiplexers. Each multiplexer uses a 2-to-4 decoder controlled by the common select inputs S0 and S1 to select one of four data inputs. When S0=0 and S1=0, input I0 is selected; when S0=1 and S1=0, input I1 is selected; and so on. The selected input is passed non-inverted to the output (Y). The active LOW strobe (OE) provides an override — when HIGH, the output is forced to LOW regardless of the selected input. This is useful for disabling the multiplexer output or for creating additional logic functions. The common select inputs allow both multiplexers to be controlled simultaneously, making the device ideal for parallel data bus routing where two data streams need to be selected in unison. The non-inverting architecture preserves signal polarity.

Pin Description: 74HC153D Pin Definition and Functions
Pin Name Type Function
1 1OE Input Strobe/enable for MUX 1 (active LOW)
2 S1 Input Common select input 1
3 1I3 Input Data input 3 for MUX 1
4 1I2 Input Data input 2 for MUX 1
5 1I1 Input Data input 1 for MUX 1
6 1I0 Input Data input 0 for MUX 1
7 1Y Output Output for MUX 1
8 GND Power Ground (0 V)
9 2Y Output Output for MUX 2
10 2I0 Input Data input 0 for MUX 2
11 2I1 Input Data input 1 for MUX 2
12 2I2 Input Data input 2 for MUX 2
13 2I3 Input Data input 3 for MUX 2
14 S0 Input Common select input 0
15 2OE Input Strobe/enable for MUX 2 (active LOW)
16 VCC Power Supply voltage
Application Scenarios: In which products and applications is 74HC153D used
  • Data routing and selection in digital data processing systems
  • Parallel-to-serial data conversion circuits
  • Programmable logic function generators
  • Bus multiplexing in microprocessor systems
  • Video signal routing and selection
Alternative Models: What chips are recommended as replacements for 74HC153D
Manufacturer Part Number Package Notes
Texas Instruments SN74HC153D SOIC-16 Pin-to-pin compatible
onsemi MC74HC153ADR2G SOIC-16 Equivalent function
Toshiba TC74HC153AP DIP-16 Equivalent function
Nexperia 74HCT153D SO16 TTL input level variant
Nexperia 74HC153PW TSSOP16 Same function, TSSOP package

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1