Opens in a new tab

NCP380LMUAJAATBG

High-side power switch, 70mΩ, 2.5-5.5V, adj current limit 0.5-2.1A, reverse V prot, UDFN-6, USB

4532

Effective Inventory

Image for reference only

Manufacturer Part:

NCP380LMUAJAATBG

Package:

UDFN-6 (2.0 x 2.0 x 0.55 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi NCP380LMUAJAATBG is a high-side power distribution switch with adjustable current limiting, designed for USB and other hot-swap applications. Housed in a UDFN-6 package, it integrates a 70 mΩ P-channel MOSFET with current limit, thermal shutdown, reverse voltage protection, and under-voltage lockout. The adjustable current limit range is 500 mA to 2.1 A via an external resistor, and the device supports IEC 61000-4-2 Level 4 ESD protection.

Key Specifications

Switch Type High-Side Power Switch (P-MOSFET)
Input Voltage Range 2.5 V to 5.5 V
On-Resistance (Typ) 70 mΩ (UDFN-6)
Current Limit (Adjustable) 500 mA to 2.1 A (via RILIM)
Maximum DC Current 2.1 A (UDFN-6)
Enable Input Active High (EN)
Fault Output Active Low (FLAG, open drain)
ESD Rating (IEC 61000-4-2) 15 kV Air, 8 kV Contact (Output)
Operating Temperature -40°C to +85°C (TA)
Package UDFN-6 (2 x 2 mm)

Features

  • 70 mΩ low on-resistance P-channel MOSFET for minimal voltage drop
  • Adjustable current limit from 500 mA to 2.1 A via external resistor
  • Reverse voltage protection with internal comparator
  • Thermal shutdown with auto-retry
  • Under-voltage lockout (UVLO) ensures safe startup
  • Built-in soft-start controls inrush current
  • Soft turn-off minimizes voltage ringing during switching
  • IEC 61000-4-2 Level 4 ESD protection (8 kV contact, 15 kV air)
  • Fault flag output signals over-current, over-temperature, or reverse-voltage
  • Pb-Free, RoHS compliant

Applications

  • USB port power distribution in laptops and TVs
  • Hot-swap power supply sequencing
  • Peripheral device power management
  • Battery charger output protection
  • General-purpose 5V/3.3V power switching
Product Introduction: NCP380LMUAJAATBG Product Introduction

The onsemi NCP380LMUAJAATBG is a high-side power distribution switch designed for applications subject to heavy capacitive loads and short-circuit conditions, such as USB ports and hot-swap power supplies. The device integrates a 70 mΩ P-channel MOSFET in a compact UDFN-6 package with exposed pad for excellent thermal performance. When the output load exceeds the current limit threshold or a short circuit occurs, the device switches to constant-current regulation mode, limiting the output current to the programmed level. The current limit threshold is adjustable from 500 mA to 2.1 A via an external resistor (RILIM). An internal reverse-voltage detection comparator disables the switch when the output voltage exceeds the input voltage, protecting the input supply. The FLAG output (active low, open drain) signals fault conditions including over-current, over-temperature, and reverse voltage. Built-in soft-start and soft turn-off features minimize inrush current and voltage ringing. The device supports IEC 61000-4-2 Level 4 ESD protection on the output.

Working Principle: NCP380LMUAJAATBG Working Principle

The NCP380LMUAJAATBG operates as a high-side power switch using an internal P-channel MOSFET. When EN is driven high, the gate driver turns on the P-MOSFET, connecting VIN to VOUT through the 70 mΩ on-resistance. The soft-start circuit gradually turns on the MOSFET to limit inrush current into capacitive loads. The current sense circuit monitors the load current — when it exceeds the programmed limit (set by RILIM), the device enters constant-current mode, regulating the MOSFET gate to maintain the current at the limit threshold. If the over-current condition persists and the junction temperature rises, the thermal shutdown circuit turns off the MOSFET at approximately 140°C. The reverse voltage comparator monitors VOUT vs VIN — if VOUT exceeds VIN by more than ~140 mV, the MOSFET is turned off to prevent current flowing back into the source. The FLAG output is asserted low during any fault condition. The UVLO circuit ensures the MOSFET remains off until VIN exceeds approximately 2.0V.

Pin Description: NCP380LMUAJAATBG Pin Definition and Functions
Pin Name Type Function
1 OUT Output Power switch output — connect to load
2 GND Power Ground reference
3 FLAG Output Fault flag output (active low, open drain) — requires pull-up resistor
4 IN Power Power switch input voltage (2.5V to 5.5V)
5 EN Input Enable input — logic high turns on switch
6 ILIM Input Current limit programming — connect RILIM to GND
Pad PAD1 Thermal Exposed thermal pad — must be soldered to PCB ground plane
Application Scenarios: In which products and applications is NCP380LMUAJAATBG used
  • USB port power switching and protection in laptops, tablets, and TVs
  • Hot-plug power supply management in server and telecom equipment
  • Li-ion battery charger output short-circuit protection
  • General-purpose 5V or 3.3V peripheral power distribution
  • Automotive USB charger port protection (non-automotive grade)
Alternative Models: What chips are recommended as replacements for NCP380LMUAJAATBG
Manufacturer Part Number Package Notes
onsemi NCP380HSNAAATBG TSOP-5 Fixed current limit, smaller form factor
onsemi NCP380LMUAJAATBG UDFN-6 This part (adjustable, UDFN)
Texas Instruments TPS2552DRBT SON-6 Similar USB power switch
Maxim Integrated MAX894LETA+ TDFN-6 Comparable adjustable current limit switch
onsemi NIS6201STDR2G TSOP-5 Lower RDS(on) alternative, fixed limit

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1