Opens in a new tab

Home » Integrated Circuits ICs » NC7SZ175P6

NC7SZ175P6

Single D flip-flop with set/reset, 1.65-5.5V, 4.6ns, SC-70-6 TinyLogic, async PRE/CLR

8765

Effective Inventory

Image for reference only

Manufacturer Part:

NC7SZ175P6

Package:

SC-70-6 (SOT-363) 2.1 x 2.0 x 1.0 mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi NC7SZ175P6 is a single D-type flip-flop with set and reset capabilities in an ultra-compact SC-70-6 (SOT-363) package. Operating from 1.65V to 5.5V with 4.6 ns propagation delay at 5V, this TinyLogic device features edge-triggered clock input, asynchronous set and reset, and CMOS output drive, making it ideal for high-density portable and consumer electronics.

Key Specifications

Logic Function Single D-Type Flip-Flop with Set/Reset
Supply Voltage 1.65 V to 5.5 V
Propagation Delay (tpd) 4.6 ns (Typ @ 5V)
Trigger Type Positive Edge (Rising)
Set/Reset Asynchronous, Active Low
Output Drive plus/minus 8 mA
Operating Temperature -55C to +125C
Package SC-70-6 (SOT-363)

Features

  • Ultra-compact SC-70-6 package for high-density PCB designs
  • Wide operating voltage range from 1.65V to 5.5V supports mixed-voltage systems
  • Asynchronous set (PRE) and reset (CLR) inputs for flexible control
  • Positive edge-triggered clock for reliable data latching
  • High-speed operation with 4.6 ns propagation delay at 5V
  • Low static current of 1 microA maximum
  • Inputs tolerate voltages up to 5.5V independent of VCC
  • Pb-Free, RoHS compliant

Applications

  • Flip-flop and register elements in portable devices
  • Debounce circuits for mechanical switches
  • Frequency division and clock synchronization
  • Power sequencing and reset delay circuits
  • General-purpose digital logic in space-constrained designs
Product Introduction: NC7SZ175P6 Product Introduction

The onsemi NC7SZ175P6 is a single D-type flip-flop with asynchronous preset (PRE) and clear (CLR) inputs, housed in the ultra-compact SC-70-6 (SOT-363) package. As part of the TinyLogic UHS (Ultra High Speed) family, the device operates over a wide supply voltage range of 1.65V to 5.5V, making it suitable for both 1.8V and 5V system designs. Data on the D input is transferred to the Q output on the rising edge of the clock (CLK). The asynchronous PRE and CLR inputs allow the output to be set or cleared independently of the clock signal. With a propagation delay of only 4.6 ns at 5V and low static current of 1 microA, the device delivers high performance with minimal power consumption. The inputs are overvoltage tolerant to 5.5V regardless of VCC, supporting live insertion and mixed-voltage interfacing.

Working Principle: NC7SZ175P6 Working Principle

The NC7SZ175P6 implements a single edge-triggered D-type flip-flop. On the rising edge of CLK, the data present at the D input is sampled and transferred to the Q output, where it remains until the next rising clock edge or until a set/reset operation occurs. The asynchronous PRE (preset) input, when driven LOW, immediately sets Q HIGH regardless of the clock or D input. Similarly, the asynchronous CLR (clear) input, when driven LOW, immediately resets Q LOW. If both PRE and CLR are driven LOW simultaneously, both Q and not-Q outputs go HIGH (illegal state) — this condition should be avoided. The flip-flop uses a master-slave architecture with transmission gates and inverters to ensure reliable edge-triggered operation. The overvoltage-tolerant input structure allows input signals up to 5.5V even when VCC is as low as 1.65V, enabling level-shifting between voltage domains. The CMOS output buffer provides plus/minus 8 mA drive capability.

Pin Description: NC7SZ175P6 Pin Definition and Functions
Pin Name Type Function
1 CLR Input Asynchronous clear (active low) — forces Q LOW
2 D Input Data input — sampled on rising edge of CLK
3 CLK Input Clock input — rising edge triggers data transfer
4 PRE Input Asynchronous preset (active low) — forces Q HIGH
5 Q Output Flip-flop output
6 VCC Power Supply voltage (1.65V to 5.5V)
Application Scenarios: In which products and applications is NC7SZ175P6 used
  • Switch debounce circuit with D flip-flop and RC network
  • Clock domain synchronization for asynchronous signals
  • Frequency divider chain in clock generation circuits
  • Power-on reset generation with RC delay on D input
  • State machine element in compact digital logic designs
Alternative Models: What chips are recommended as replacements for NC7SZ175P6
Manufacturer Part Number Package Notes
onsemi NC7SZ175P6X SC-70-6 Tape and reel packaging
Texas Instruments SN74LVC1G74DCKR SC-70-6 Pin-compatible equivalent
Nexperia 74LVC1G74GW TSSOP-6 Similar D flip-flop with set/reset
onsemi NC7SV175P6X SC-70-6 Lower voltage variant (1.65V optimized)
STMicroelectronics 74LVC1G74SE SOT-363 Equivalent single D flip-flop

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1