Opens in a new tab

EEUFC1V471B

Aluminum electrolytic capacitor, 470uF, 35V, low impedance, 7000h@105C, radial 10x16mm, FC series

8901

Effective Inventory

Image for reference only

Manufacturer Part:

EEUFC1V471B

Package:

Radial D=10mm, L=16mm, pitch=5mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Panasonic EEUFC1V471B is a 470 microF, 35V aluminum electrolytic capacitor from the FC series, featuring low impedance, long life of 7000 hours at 105C, and radial through-hole mounting. Designed for switching power supply filtering, the FC series offers excellent ripple current capability and reliability for industrial and consumer electronics applications.

Key Specifications

Capacitance 470 microF
Rated Voltage 35 V DC
Tolerance plus/minus 20%
Impedance (100 kHz, 20C) 0.053 ohm (Max)
Ripple Current (100 kHz, 105C) 820 mA
Lifetime 7000 hours @ 105C
Operating Temperature -55C to +105C
Package Radial, D=10mm, L=16mm

Features

  • Low impedance design optimized for switching power supply output filtering
  • Long lifetime of 7000 hours at 105C for extended product reliability
  • High ripple current capability of 820 mA for demanding SMPS applications
  • FC series premium grade with superior frequency characteristics
  • Radial through-hole mounting with standard 5mm lead spacing
  • RoHS compliant, Pb-Free terminations

Applications

  • Switching power supply output filtering
  • DC-DC converter input and output capacitors
  • Audio amplifier power supply decoupling
  • Motor drive bus capacitor for low-power drives
  • Industrial control system power supply filtering
Product Introduction: EEUFC1V471B Product Introduction

The Panasonic EEUFC1V471B is a 470 microF, 35V aluminum electrolytic capacitor from the FC (low impedance) series. Designed specifically for switching power supply applications, the FC series features low impedance (0.053 ohm maximum at 100 kHz) and high ripple current capability (820 mA), making it ideal for SMPS output filtering where high-frequency ripple must be absorbed efficiently. The capacitor offers a long lifetime of 7000 hours at 105C, ensuring product reliability in demanding thermal environments. The radial through-hole package with 10mm diameter and 16mm length provides a compact solution for PCB mounting with standard 5mm lead spacing. The FC series uses high-quality electrolyte and etched foil technology to achieve superior frequency characteristics compared to general-purpose aluminum electrolytic capacitors.

Working Principle: EEUFC1V471B Working Principle

The EEUFC1V471B is a polarized aluminum electrolytic capacitor. The anode is formed from etched aluminum foil with a large surface area, increasing the effective capacitance per unit volume. A thin aluminum oxide (Al2O3) layer, grown electrochemically on the anode surface, serves as the dielectric. The cathode is a second aluminum foil in contact with a liquid electrolyte (typically based on ethylene glycol with additives) that impregnates a separator paper between the foils. When a DC voltage is applied (anode positive), charge is stored in the electric double layer at the oxide-electrolyte interface. The large effective surface area of the etched foil and the extremely thin oxide layer (approximately 1.4 nm per volt) enable high capacitance in a compact volume. The 0.053 ohm impedance at 100 kHz represents the equivalent series resistance (ESR) of the electrolyte, foil, and terminals — lower ESR allows higher ripple current handling with less self-heating. The 7000-hour lifetime at 105C is determined by the rate of electrolyte evaporation through the capacitor seal, which degrades the ESR and capacitance over time.

Pin Description: EEUFC1V471B Pin Definition and Functions
Pin Name Type Function
1 Positive (+) Terminal Anode — longer lead, marked with + on sleeve, connect to positive voltage
2 Negative (-) Terminal Cathode — shorter lead, marked with stripe on sleeve, connect to ground
Application Scenarios: In which products and applications is EEUFC1V471B used
  • SMPS output filter capacitor for 12V/24V power supply rails
  • DC-DC buck converter input bulk capacitor for 24V industrial systems
  • Audio power amplifier supply decoupling for reduced hum and noise
  • BLDC motor drive DC bus capacitor for low-power (<100W) drives
  • Industrial PLC and control system power supply smoothing
Alternative Models: What chips are recommended as replacements for EEUFC1V471B
Manufacturer Part Number Package Notes
Panasonic EEUFC1V471 Radial 10×16 Same specs without B suffix
Panasonic EEUFR1V471 Radial FR series, higher temp (105C, 10000h)
Nichicon UFW1V471MPD Radial 10×16 Equivalent 470uF 35V low-Z
Nippon Chemi-Con ESK1V471MP16S Radial Comparable 470uF 35V electrolytic
Rubycon ZLH1V471MPTF Radial Low impedance equivalent

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1