Opens in a new tab

Home » Integrated Circuits ICs » W25Q128JVFIQ

W25Q128JVFIQ

128Mbit (16MB) Serial NOR Flash, Quad-SPI 133MHz, 2.7-3.6V, SOIC-16, Winbond

302

Effective Inventory

Image for reference only

Manufacturer Part:

W25Q128JVFIQ

Package:

SOIC-16 (300-mil) 10.49×7.59×2.34mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Winbond W25Q128JVFIQ is a 128M-bit (16MB) Serial NOR Flash memory supporting Standard SPI, Dual SPI, Quad SPI, and QPI interfaces. Housed in a 16-pin SOIC package, it operates at 2.7V to 3.6V with clock frequencies up to 133MHz, achieving equivalent transfer rates of 532MHz in Quad-SPI mode. The device features uniform 4KB sectors, flexible erase architecture, and advanced security features.

Key Specifications

Memory Density 128 Mbit (16 MB)
Organization 16M × 8 bit
Interface Standard/Dual/Quad SPI, QPI
Max Clock Frequency 133 MHz
Equivalent Quad-SPI Rate 532 MHz (4×133MHz)
Operating Voltage 2.7V to 3.6V
Page Size 256 Bytes
Sector Size 4 KB (uniform)
Block Sizes 32 KB and 64 KB
Erase/Program Cycles 100,000+ per sector
Data Retention 20 years minimum
Operating Temperature -40°C to +85°C
Package SOIC-16 (300-mil)
JEDEC ID 0xEF 0x40 0x18

Features

  • Standard SPI: CLK, /CS, DI, DO, /WP, /HOLD (with dedicated /RESET pin on 16-pin SOIC)
  • Dual SPI and Quad SPI for 2× and 4× throughput improvement
  • QPI mode reduces instruction overhead for Execute-in-Place (XIP) operation
  • Uniform 4KB sectors with individual sector/block write protection
  • 64-bit Unique ID for device identification
  • 3 × 256-byte Security Registers with OTP lock capability
  • Volatile and Non-Volatile Status Register bits
  • SFDP (Serial Flash Discoverable Parameters) register support
  • Programmable output driver strength
  • Software and hardware reset capability

Applications

  • BIOS/firmware storage for motherboards
  • Embedded systems code storage
  • Execute-in-Place (XIP) for microcontrollers
  • Wireless connectivity module firmware (Wi-Fi, Bluetooth)
  • Digital cameras and set-top boxes
  • Industrial control systems
Product Introduction: W25Q128JVFIQ Product Introduction

The Winbond W25Q128JVFIQ is a 128M-bit Serial NOR Flash memory with support for Standard, Dual, Quad SPI, and QPI interfaces. In a 16-pin SOIC package, it achieves clock frequencies up to 133MHz, with equivalent data rates of 532MHz in Quad-SPI mode. The memory is organized into 256-byte pages, uniform 4KB sectors, and 32KB/64KB blocks for flexible erase operations. Advanced features include a 64-bit unique ID, 3×256-byte security registers with OTP lock, SFDP support, programmable output driver strength, and both volatile and non-volatile status register bits. The 16-pin SOIC variant provides a dedicated /RESET pin separate from /HOLD.

Working Principle: W25Q128JVFIQ Working Principle

The W25Q128JV uses NOR Flash architecture where each memory cell is a floating-gate MOSFET arranged in a NOR topology. Data is written via Channel Hot Electron Injection (CHEI): a high voltage on the gate and drain injects electrons into the floating gate, raising the cell threshold voltage to represent a ‘0’ state. Erasing uses Fowler-Nordheim Tunneling: a high voltage on the source removes electrons from the floating gate, resetting the cell to ‘1’. Reading applies a mid-level voltage to the gate; the cell conducts if erased (‘1’) or stays off if programmed (‘0’). The SPI interface serializes all commands, addresses, and data through the DI/DO pins (or IO0-IO3 in Quad mode). The internal control logic decodes commands and manages program/erase timing, status polling, and write protection.

Pin Description: W25Q128JVFIQ Pin Definition and Functions
Application Scenarios: In which products and applications is W25Q128JVFIQ used
Alternative Models: What chips are recommended as replacements for W25Q128JVFIQ

W25Q128JVSIQ (SOIC-8 variant, no /RESET pin); W25Q128FVIQ (predecessor generation, 104MHz); MX25L12835F (Macronix, equivalent); S25FL128S (Infineon/Cypress); GD25Q128C (GigaDevice)

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1