Opens in a new tab

Home » Integrated Circuits ICs » ADM2587EBRWZ

ADM2587EBRWZ

Signal+power isolated RS-485 transceiver, 500kbps, 2.5kV isolation, ±15kV ESD, 20-SOIC_W, Analog Devices

4132

Effective Inventory

Image for reference only

Manufacturer Part:

ADM2587EBRWZ

Package:

SOIC_W-20 (13.0×7.6×2.35mm, creepage 8mm)

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Analog Devices ADM2587EBRWZ is a fully integrated signal and power isolated RS-485/RS-422 transceiver with ±15kV ESD protection. It integrates a 3-channel iCoupler digital isolator, a tri-state differential line driver, a differential input receiver, and an isoPower isolated DC-to-DC converter in a single 20-lead wide-body SOIC package. The ADM2587E supports data rates up to 500kbps and operates from 3.3V or 5V single supply.

Key Specifications

Interface Type RS-485/RS-422 (Half/Full Duplex)
Data Rate 500 kbps (ADM2587E)
Isolation Voltage 2500 V rms (UL 1577, 1 minute)
Working Voltage (VIORM) 560 V peak (VDE 0884-10)
ESD Protection ±15 kV HBM (RS-485 pins)
Supply Voltage 3.3V or 5V (logic side)
Isolated Output 3.3V or 5V (via integrated DC-DC)
Max Nodes on Bus 256
Common-Mode Transient Immunity >25 kV/μs
Receiver Input Sensitivity ±200 mV
Operating Temperature -40°C to +85°C
Package 20-Lead Wide-Body SOIC (SOIC_W)
Package Dimensions 13.0 × 7.6 × 2.35 mm
Safety Approvals UL 1577, VDE 0884-10, CQC GB4943.1

Features

  • Fully integrated signal and power isolation — no external isolated DC-DC required
  • iCoupler technology with chip-scale transformer isolation
  • isoPower integrated isolated DC-to-DC converter
  • Configurable as half-duplex or full-duplex
  • Open- and short-circuit fail-safe receiver inputs
  • Thermal shutdown protection
  • Current limiting and bus contention protection
  • 3.3V or 5V single supply operation
  • High common-mode transient immunity >25 kV/μs

Applications

  • Isolated RS-485/RS-422 interfaces
  • Industrial field networks (Modbus, PROFIBUS)
  • Multipoint data transmission systems
  • Programmable Logic Controllers (PLCs)
  • Building automation
  • Power inverters and motor drives
Product Introduction: ADM2587EBRWZ Product Introduction

The Analog Devices ADM2587EBRWZ is a fully integrated signal and power isolated RS-485/RS-422 transceiver in a 20-lead wide-body SOIC package. It combines ADI’s iCoupler digital isolation technology with an integrated isoPower DC-to-DC converter, eliminating the need for any external isolated power supply. The device supports data rates up to 500kbps, operates from a single 3.3V or 5V supply, and provides 2500V rms isolation (UL 1577) with ±15kV ESD protection on RS-485 bus pins. Configurable as half-duplex or full-duplex, it supports up to 256 nodes on one bus with open/short fail-safe receiver inputs and >25kV/μs common-mode transient immunity.

Working Principle: ADM2587EBRWZ Working Principle

The ADM2587E integrates three functional blocks: (1) iCoupler digital isolators using chip-scale transformer technology — high-speed data crosses the isolation barrier via magnetic coupling through polyimide insulation, providing galvanic isolation; (2) An RS-485 transceiver — the driver converts single-ended TXD to differential signals (A/B) compliant with TIA/EIA-485-A, while the receiver converts differential bus signals back to single-ended RXD; (3) isoPower DC-DC converter — uses high-frequency switching (approximately 180MHz) to transfer power across the isolation barrier via an integrated transformer, generating the isolated supply for the bus-side circuitry. The back-to-back architecture ensures signal integrity and power isolation in a single package. Thermal shutdown and current limiting protect against fault conditions.

Pin Description: ADM2587EBRWZ Pin Definition and Functions
Application Scenarios: In which products and applications is ADM2587EBRWZ used
Alternative Models: What chips are recommended as replacements for ADM2587EBRWZ

ADM2582EBRWZ (16Mbps high-speed variant); ADM2587EBRWZ-REEL7 (tape & reel packaging); ISO1176T (TI, isolated RS-485, requires external DC-DC); MAX14936 (Maxim, isolated RS-485 without integrated power); Si862x (Silicon Labs, digital isolator only)

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1