Opens in a new tab

L5973D013TR

2.5A step-down buck regulator, 4-36V input, 1.235-35V output, 250kHz, HSOP-8

12050

Effective Inventory

Image for reference only

Manufacturer Part:

L5973D013TR

Package:

HSOP-8 with exposed pad (5.0 x 6.2 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The L5973D013TR from STMicroelectronics is a step-down monolithic power switching regulator with a 2.5A internal switch in an HSOP-8 exposed pad package. It accepts input voltages from 4V to 36V and provides an adjustable output from 1.235V to 35V. The device features a fixed 250 kHz switching frequency with an internal P-channel D-MOS transistor (Rds(on) = 250 mΩ).

Key Specifications

Input Voltage Range 4V to 36V
Output Voltage Range 1.235V to 35V (adjustable)
Maximum Output Current 2A (continuous), 2.5A (switch limit)
Switching Frequency 250 kHz (fixed)
Rds(on) 250 mΩ (typical)
Reference Voltage 3.3V (±2%)
Thermal Resistance (RthJA) 40°C/W
Operating Temperature -40°C to 150°C (junction)
Package HSOP-8 with exposed pad
Packing Tape & Reel

Features

  • 2.5A internal P-channel D-MOS switch
  • 100% duty cycle for low dropout operation
  • Voltage feedforward for excellent line regulation
  • Zero load current operation
  • Internal current limiting with frequency foldback for short-circuit protection
  • Thermal shutdown protection
  • Inhibit pin for zero current consumption in standby
  • Protection against feedback disconnection
  • Synchronization pin (up to 500 kHz)

Applications

  • 5V bus step-down converters in computing applications
  • Industrial power supplies and distributed power systems
  • Battery-powered equipment and chargers
  • LED driver power stages
  • Automotive auxiliary power rails
  • Telecom and networking equipment
Product Introduction: L5973D013TR Product Introduction

The L5973D013TR is a step-down monolithic power switching regulator from STMicroelectronics capable of delivering more than 2A DC current to the load. The device uses an internal P-channel D-MOS transistor with a typical Rds(on) of 250 mΩ as the switching element, minimizing external component size. The output voltage is adjustable from 1.235V to 35V. A minimum input voltage of 4V makes it particularly suitable for 5V bus applications. The HSOP-8 package with exposed pad reduces thermal resistance to approximately 40°C/W, enabling high-current operation without external heat sinking. The L5973D013TR is the tape & reel packaged version of the L5973D.

Working Principle: L5973D013TR Working Principle

The L5973D operates through four key subsystems:

1. Power Stage: An internal P-channel D-MOS transistor switches the input voltage to an external LC filter. The transistor has a typical Rds(on) of 250 mΩ. The device supports 100% duty cycle operation for low dropout conditions.

2. Control Loop: A transconductance error amplifier compares the feedback voltage (FB pin) with an internal 1.235V bandgap reference. The error signal modulates the PWM comparator, which sets the duty cycle. Voltage feedforward compensates for input voltage variations, ensuring constant loop gain.

3. Oscillator & Synchronization: An internal sawtooth oscillator generates the 250 kHz switching frequency. The SYNC pin allows external synchronization up to 500 kHz or master-slave configuration of multiple regulators.

4. Protection Circuits: Pulse-by-pulse current limiting protects against overloads, while a frequency foldback mechanism reduces switching frequency under severe short-circuit conditions. Thermal shutdown disables the device if junction temperature exceeds safe limits. An INH pin enables zero-current standby mode.

Pin Description: L5973D013TR Pin Definition and Functions
Pin Name Type Function
1 OUT Output Regulator output (connect to inductor)
2 SYNC I/O Master/slave synchronization
3 INH Input Inhibit (active high, ground to enable)
4 COMP Output Error amplifier output for frequency compensation
5 FB Input Feedback input (1.235V reference)
6 VREF Output 3.3V reference voltage (no cap needed)
7 GND Power Ground
8 VCC Power Unregulated DC input voltage (4–36V)
Application Scenarios: In which products and applications is L5973D013TR used
  • 5V bus converters: Step-down from 5V or 12V rails in computing and telecom equipment with up to 2A output
  • Industrial control systems: Adjustable output from 1.235V to 35V for sensors, actuators, and MCU power rails
  • Battery chargers: Wide input range (4–36V) accommodates various battery chemistries and wall adapters
  • LED driver power: Constant voltage front-end for LED strings with thermal shutdown protection
  • Automotive auxiliary power: 12V to 5V/3.3V conversion with 100% duty cycle dropout operation
Alternative Models: What chips are recommended as replacements for L5973D013TR
Manufacturer Part Number Package Notes
STMicroelectronics L5973D HSOP-8 EP Tube-packed version of same device
STMicroelectronics A5974D HSOP-8 EP Parametric equivalent, 2.5A
Texas Instruments LM2596S-5.0 TO-263-5 3A buck, 150 kHz, larger package
onsemi NCV2575D2T5R4G DDPAK-5 1.5A automotive buck regulator
Monolithic Power MP1584EN SOIC-8 3A, 1.5 MHz, smaller external components
Diodes Inc AP1501-50K5G-13 TO-252-5 3A, 150 kHz, low-cost alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1