Opens in a new tab

TS393IDT

Micropower CMOS dual comparator, 9µA/comparator, 2.7-16V, open-drain, SO-8

8234

Effective Inventory

Image for reference only

Manufacturer Part:

TS393IDT

Package:

SO-8 (5.0 x 6.2 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TS393IDT from STMicroelectronics is a micropower CMOS dual voltage comparator with extremely low consumption of 9 µA per comparator, 20 times less than the bipolar LM393. It operates from a single 2.7V to 16V supply or dual ±1.35V to ±8V supplies. The device is packaged in an SO-8 footprint and features an open-drain output compatible with wired-OR configurations.

Key Specifications

Number of Comparators 2 (dual)
Supply Voltage Range 2.7V to 16V (single) / ±1.35V to ±8V (dual)
Supply Current 9 µA per comparator (typical)
Input Bias Current 1 pA (typical)
Input Offset Current 1 pA (typical)
Input Common-Mode Range Includes ground
Output Type Open-drain
Operating Temperature -40°C to +125°C
Package SO-8
Packing Tape & Reel

Features

  • Extremely low supply current: 9 µA per comparator (20x less than LM393)
  • Ultra-low input bias current: 1 pA typical (CMOS input)
  • Input common-mode voltage range includes ground
  • Open-drain output for wired-OR connections
  • Response time comparable to LM393
  • Wide single or dual supply operation
  • Ecopack3 (RoHS compliant)
  • Pin-compatible with LM393

Applications

  • Battery-powered threshold detection circuits
  • Window comparators for voltage monitoring
  • Level shifting and signal conditioning
  • IR receiver front-end signal detection
  • Oscillator and timing circuits
  • Industrial sensor signal detection
Product Introduction: TS393IDT Product Introduction

The TS393IDT is a micropower CMOS dual voltage comparator from STMicroelectronics, offering extremely low power consumption of 9 µA per comparator, which is 20 times less than the industry-standard bipolar LM393. The device maintains response times comparable to the LM393 while dramatically reducing power consumption. The CMOS input stage provides ultra-low input bias current of 1 pA typical, making it suitable for high-impedance sensor interfaces. The input common-mode voltage range includes ground, enabling single-supply operation from 2.7V to 16V. The open-drain output is compatible with wired-OR configurations and can interface with logic levels above or below the supply voltage. The TS393 is pin-compatible with the LM393, enabling direct replacement in power-sensitive applications.

Working Principle: TS393IDT Working Principle

The TS393 operates through three key subsystems:

1. Input Stage: A CMOS differential pair compares the two input voltages (IN+ and IN-). The high-impedance CMOS inputs draw only 1 pA of bias current, enabling connection to high-impedance signal sources without loading effects. The input common-mode range extends from ground to VCC-1.5V, allowing ground-referenced sensing.

2. Comparison Logic: The differential amplifier stage amplifies the voltage difference between IN+ and IN-. When IN+ exceeds IN-, the comparator output transitions. The propagation delay is comparable to the LM393 despite the dramatically lower supply current, achieved through optimized CMOS design. Internal hysteresis can be added externally via positive feedback.

3. Output Stage: An open-drain NMOS transistor provides the output. When the comparator detects IN+ IN-, the output transistor turns off, and the output floats (requires an external pull-up resistor). This open-drain configuration supports wired-OR connections and level shifting to voltages different from the comparator supply.

Pin Description: TS393IDT Pin Definition and Functions
Pin Name Type Function
1 OUT1 Output Comparator 1 output (open-drain)
2 IN1- Input Comparator 1 inverting input
3 IN1+ Input Comparator 1 non-inverting input
4 GND Power Ground / V-
5 IN2+ Input Comparator 2 non-inverting input
6 IN2- Input Comparator 2 inverting input
7 OUT2 Output Comparator 2 output (open-drain)
8 VCC Power Positive supply (2.7–16V)
Application Scenarios: In which products and applications is TS393IDT used
  • Battery voltage monitoring: Ultra-low 9 µA current consumption enables continuous battery level detection in coin-cell devices with open-drain output for interrupt generation
  • Window comparator circuits: Dual comparators form upper/lower threshold detection with 1 pA input bias for high-impedance sensor interfaces
  • IR signal detection: CMOS inputs and fast response time for IR receiver front-end signal threshold detection in remote control applications
  • Level shifting: Open-drain output enables voltage translation between different logic domains (e.g., 3.3V to 5V) with single supply operation
  • Relaxation oscillators: Low power consumption and ground-sensing capability for battery-powered timing and clock generation circuits
Alternative Models: What chips are recommended as replacements for TS393IDT
Manufacturer Part Number Package Notes
STMicroelectronics TS393IPT TSSOP-8 Same device, TSSOP package
STMicroelectronics TS3702IDT SO-8 Push-pull output version
Texas Instruments LM393DGKR VSSOP-8 Bipolar, higher current, pin-compatible
onsemi NCV393DR2G SOIC-8 Automotive dual comparator
Microchip MCP6541-I/SN SOIC-8 Single CMOS comparator, push-pull
NXP NJM2903M SOIC-8 Dual comparator, 2V to 36V supply

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1