Opens in a new tab

TSV912IQ2T

Rail-to-rail dual CMOS op-amp, 8MHz GBW, 4.5V/µs slew, 9nV/√Hz, DFN-8 2x2mm

6521

Effective Inventory

Image for reference only

Manufacturer Part:

TSV912IQ2T

Package:

DFN-8 (2.0 x 2.0 x 0.6 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TSV912IQ2T from STMicroelectronics is a rail-to-rail input/output dual CMOS operational amplifier offering low offset voltage (3 mV max), high speed (8 MHz gain-bandwidth product), and low noise (9 nV/√Hz). Operating from a 2.5V to 5.5V single supply, it features a slew rate of 4.5 V/µs and is housed in a DFN-8 (2 x 2 mm) package.

Key Specifications

Number of Amplifiers 2 (dual)
Supply Voltage Range 2.5V to 5.5V
Gain-Bandwidth Product 8 MHz
Slew Rate 4.5 V/µs
Input Offset Voltage 3 mV (maximum)
Input Noise Voltage 9 nV/√Hz (at 1 kHz)
Supply Current per Amplifier 1.2 mA (typical)
Input Bias Current 1 pA (typical)
Operating Temperature -40°C to +125°C
Package DFN-8 (2 x 2 x 0.6 mm)

Features

  • Rail-to-rail input and output (RRIO) operation
  • 8 MHz gain-bandwidth product
  • Low input offset voltage: 3 mV maximum
  • Low noise: 9 nV/√Hz at 1 kHz
  • CMOS input with 1 pA typical bias current
  • Stable for capacitive loads up to 100 pF
  • 2.5V to 5.5V single supply operation
  • Ultra-compact DFN-8 (2 x 2 mm) package
  • ESD protection: 4 kV HBM

Applications

  • Active filters and signal conditioning
  • Sensor interface circuits
  • Current sensing for motor control
  • Audio preamplifiers
  • Portable medical instrumentation
  • Battery-powered analog front-ends
Product Introduction: TSV912IQ2T Product Introduction

The TSV912IQ2T is a rail-to-rail input/output dual CMOS operational amplifier from STMicroelectronics, offering an excellent combination of speed, precision, and low power consumption. With an 8 MHz gain-bandwidth product and 4.5 V/µs slew rate, the device is suitable for a wide range of signal conditioning applications. The rail-to-rail input and output stages maximize dynamic range when operating from low supply voltages (2.5V to 5.5V). The CMOS input stage provides ultra-low bias current of 1 pA, making it ideal for high-impedance sensor interfaces. The low input noise of 9 nV/√Hz and low offset voltage of 3 mV ensure accurate signal acquisition. The TSV912 is housed in an ultra-compact DFN-8 package (2 x 2 mm), minimizing PCB footprint in space-constrained designs.

Working Principle: TSV912IQ2T Working Principle

The TSV912 operates through three key subsystems:

1. Input Stage: A rail-to-rail CMOS differential input pair uses two complementary input stages (PMOS and NMOS) that are active in different regions of the common-mode range, ensuring the input common-mode voltage extends from the negative rail to the positive rail. The CMOS input provides 1 pA typical bias current, enabling direct connection to high-impedance signal sources.

2. Gain and Compensation: The amplifier achieves 8 MHz gain-bandwidth product through a single-stage architecture with internal Miller compensation. The slew rate of 4.5 V/µs enables faithful reproduction of fast transient signals. The amplifier is internally compensated for unity-gain stability and can drive capacitive loads up to 100 pF without additional compensation.

3. Output Stage: A rail-to-rail CMOS push-pull output stage drives the output to within millivolts of both supply rails, maximizing dynamic range. The output can source and sink several milliamps, sufficient for driving ADC inputs and moderate impedance loads.

Pin Description: TSV912IQ2T Pin Definition and Functions
Pin Name Type Function
1 OUT1 Output Amplifier 1 output
2 IN1- Input Amplifier 1 inverting input
3 IN1+ Input Amplifier 1 non-inverting input
4 VCC- Power Negative supply / Ground
5 IN2+ Input Amplifier 2 non-inverting input
6 IN2- Input Amplifier 2 inverting input
7 OUT2 Output Amplifier 2 output
8 VCC+ Power Positive supply (2.5–5.5V)
Application Scenarios: In which products and applications is TSV912IQ2T used
  • Active filters: 8 MHz GBW and rail-to-rail output enable high-order active filter designs with cutoff frequencies up to several hundred kHz from a 3.3V supply
  • Sensor interfaces: 1 pA CMOS input bias current allows direct connection to piezoelectric, capacitive, and photodiode sensors without loading effects
  • Current sensing: Rail-to-rail input common-mode range enables high-side current sensing with shunt resistors in motor control and power management circuits
  • Portable medical devices: Low noise (9 nV/√Hz) and low power (1.2 mA/ch) suit ECG, EEG, and pulse oximeter analog front-ends operating from a single Li-ion cell
  • Audio preamplifiers: 4.5 V/µs slew rate and 8 MHz bandwidth support quality audio signal conditioning in portable audio devices
Alternative Models: What chips are recommended as replacements for TSV912IQ2T
Manufacturer Part Number Package Notes
STMicroelectronics TSV912IDT SO-8 Same device, SOIC package
STMicroelectronics TSV914IQ2T DFN-14 (3×3) Quad version, same specs
Texas Instruments OPA2333AIDGKR VSSOP-8 Dual, zero-drift, 0.35MHz
Analog Devices AD8542ARMZ MSOP-8 Dual, RRIO, 1MHz
Microchip MCP6022-I/SN SOIC-8 Dual, RRIO, 10MHz
NXP NCS20072SN2T1G SOIC-8 Dual, RRIO, 6MHz

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1