Opens in a new tab

STM32F407ZET6

Cortex-M4 MCU @168MHz, 512KB Flash, 192KB SRAM, Ethernet, USB OTG, LQFP-144

7289

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F407ZET6

Package:

LQFP-144 (20 x 20 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STM32F407ZET6 from STMicroelectronics is a high-performance Arm Cortex-M4 microcontroller with FPU, running at 168 MHz. It features 512 KB of Flash memory, 192 KB of SRAM (including 64 KB CCM), an Ethernet MAC, USB OTG HS/FS, and an extensive peripheral set including three ADCs and seventeen timers, all in a 144-pin LQFP package.

Key Specifications

Core ARM Cortex-M4 with FPU (32-bit)
Max Clock Frequency 168 MHz
Performance 210 DMIPS / 600 CoreMark
Flash Memory 512 KB
SRAM 192 KB (128 KB + 64 KB CCM)
Supply Voltage 1.8V to 3.6V
Operating Temperature -40°C to +85°C
Package LQFP-144 (20 x 20 mm)
I/O Pins 114
ADC 3x 12-bit, 2.4 MSPS, 24 channels
DAC 2x 12-bit
Timers 17 (including motor control PWM)
Communication Ethernet MAC, USB OTG HS/FS, 3x SPI, 3x I2C, 4x USART, 2x UART, 2x CAN, SDIO

Features

  • ART Accelerator with instruction cache for 168 MHz 0-wait-state Flash execution
  • Floating Point Unit (single precision) and full DSP instruction set
  • Three 12-bit ADCs with 2.4 MSPS, interleaved mode up to 7.2 MSPS
  • Dual 12-bit DAC with output buffer
  • Ethernet MAC with IEEE 1588 PTP support
  • USB 2.0 OTG Full-Speed and High-Speed (with ULPI)
  • Random Number Generator (RNG) and AES hardware crypto
  • Camera interface (DCMI) and LCD-TFT controller
  • Memory Protection Unit (MPU) and Flexible External Memory Controller (FSMC)

Applications

  • Industrial automation and motor control
  • Embedded networking with Ethernet
  • Medical diagnostic equipment
  • Consumer electronics with multimedia
  • Security and surveillance systems
  • Robotics and UAV flight controllers
Product Introduction: STM32F407ZET6 Product Introduction

The STM32F407ZET6 is based on the high-performance Arm Cortex-M4 32-bit RISC core with FPU, operating at 168 MHz and delivering 210 DMIPS. The device integrates 512 KB of Flash memory and 192 KB of SRAM, including a 64 KB Core Coupled Memory (CCM) RAM for time-critical code execution. The ART Accelerator achieves 0-wait-state Flash execution at 168 MHz through instruction prefetch and cache. The STM32F407 series offers a rich peripheral set including three 12-bit ADCs (2.4 MSPS), two 12-bit DACs, seventeen timers, Ethernet MAC with IEEE 1588 precision time protocol, USB 2.0 OTG Full-Speed and High-Speed, three SPI, three I2C, four USARTs, two UARTs, two CAN, SDIO, and a camera interface (DCMI). The FSMC supports external SRAM, PSRAM, NOR, and NAND Flash. The device is offered in a 144-pin LQFP package with 114 I/Os.

Working Principle: STM32F407ZET6 Working Principle

The STM32F407ZET6 operates through five key subsystems:

1. Core & Memory: The Cortex-M4 with FPU executes at 168 MHz (210 DMIPS, 600 CoreMark). The ART Accelerator uses an instruction cache (1024 lines) and data cache to achieve 0-wait-state Flash access. The 64 KB CCM RAM provides deterministic zero-wait-state data access for time-critical algorithms. A 32-bit multi-layer bus matrix enables concurrent master accesses to different slaves.

2. Analog Subsystem: Three independent 12-bit ADCs operate at 2.4 MSPS each and can be interleaved for 7.2 MSPS combined throughput. Dual 12-bit DACs provide analog output with built-in waveform generation. An analog watchdog monitors input ranges.

3. Communication Interfaces: Ethernet MAC supports 10/100 Mbps with IEEE 1588 v2 hardware timestamping for precise network synchronization. USB OTG supports FS (12 Mbps) and HS (480 Mbps via ULPI). Multiple USART/UART, SPI, I2C, and CAN interfaces enable diverse connectivity.

4. Timing & Control: Seventeen timers include advanced motor-control PWM timers (complementary outputs with dead-time), general-purpose 16/32-bit timers, basic timers, and a SysTick timer. The RTC provides calendar with alarm and timestamp functions.

5. Power Management: Multiple power modes include Run, Sleep, Stop (with voltage scaling), and Standby. The integrated regulator supports dynamic voltage scaling. A battery backup domain preserves RTC and 4 KB backup registers.

Pin Description: STM32F407ZET6 Pin Definition and Functions
Pin Name Type Function
1 PE2 I/O GPIO / FSMC_A23 / TRACECLK
6 VBAT Power Battery backup for RTC
10 VSS_5 Power Ground
19 NRST I/O Reset (active low)
22 VDDA Power Analog supply (1.8–3.6V)
30 PA0 I/O GPIO / WKUP / ADC_IN0 / TIM2_CH1 / ETH_CRS
49 PC0 I/O GPIO / ADC123_IN10
71 VDD_2 Power Digital supply (1.8–3.6V)
76 BOOT0 Input Boot mode selection
94 PD0 I/O GPIO / FSMC_D2 / CAN1_RX
108 VDD_4 Power Digital supply
132 PE3 I/O GPIO / TRACED0
140 PH0 I/O GPIO / OSC_IN
144 PE6 I/O GPIO / TIM9_CH2
Application Scenarios: In which products and applications is STM32F407ZET6 used
  • Industrial motor control: Three ADCs with simultaneous sampling and advanced PWM timers with dead-time generation for 3-phase FOC motor drives up to 168 MHz control loop frequency
  • Embedded Ethernet: IEEE 1588 PTP hardware timestamping enables precise clock synchronization for industrial networked control and power sub-metering
  • Medical imaging: DCMI camera interface and 512 KB Flash for portable ultrasound and patient monitoring with DSP-accelerated signal processing
  • Security systems: AES hardware crypto and RNG for secure communication in access control and surveillance equipment
  • UAV flight controllers: 168 MHz FPU core, 192 KB SRAM, and 17 timers for multi-sensor fusion and motor control in drones
Alternative Models: What chips are recommended as replacements for STM32F407ZET6
Manufacturer Part Number Package Notes
STMicroelectronics STM32F407VGT6 LQFP-100 1 MB Flash, 100-pin version
STMicroelectronics STM32F407ZGT6 LQFP-144 1 MB Flash version, same package
STMicroelectronics STM32F417ZET6 LQFP-144 Adds hardware crypto (AES, DES, HASH)
GigaDevice GD32F407ZET6 LQFP-144 168 MHz, 512 KB Flash, pin compatible
STMicroelectronics STM32F427ZET6 LQFP-144 180 MHz, 512 KB Flash, FPU DP
STMicroelectronics STM32F429ZET6 LQFP-144 180 MHz, FMC, Chrom-ART, LPTIM

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1