Opens in a new tab

B59751C0120A070

EPCOS/TDK PTC inrush current limiter, 50 Ohm, 280VAC, radial leaded

6194

Effective Inventory

Image for reference only

Manufacturer Part:

B59751C0120A070

Package:

Radial Leaded Disk, 13.0 x 18.0 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The B59751C0120A070 is a PTC inrush current limiter (ICL) from EPCOS/TDK’s B59751C (C751) series. With 50 Ohm resistance at 25C and a maximum working voltage of 280VAC, this radial leaded PTC limiter provides self-resetting inrush current protection for consumer electronics, home appliances, and industrial power supplies.

Key Specifications

Series B59751C (C751)
Type PTC Inrush Current Limiter
Resistance (25C) 50 Ohm +/-25%
Maximum Working Voltage (AC) 280 VAC
Maximum DC Link Voltage 400 VDC
Thermal Capacity 1.4 J/K (typical)
Hold Current 87 mA
Trip Current 173 mA
Operating Temperature -40C to +125C
Package Radial Leaded Disk
Dimensions 13.0 x 18.0 mm (W x H)
Approvals UL (E69802), VDE (40040539)

Features

  • Self-resetting inrush current limiting – no manual reset required
  • Maximum working voltage of 280VAC for mains applications
  • DC link voltage capability up to 400VDC
  • Compact radial leaded disk package
  • UL and VDE safety approvals
  • Stable and repeatable protection characteristics

Applications

  • Consumer electronics power supply inrush limiting
  • Home appliance startup current protection
  • Industrial power supply inrush suppression
  • LED driver inrush current limiting
  • Frequency converter pre-charge circuit
Product Introduction: B59751C0120A070 Product Introduction

The EPCOS/TDK B59751C0120A070 is a PTC inrush current limiter from the B59751C (C751) series, providing self-resetting inrush current protection for 280VAC mains applications. With 50 Ohm cold resistance and a hold current of 87mA, this device limits startup surge currents in consumer electronics, home appliances, and industrial power supplies. When current flows and the device self-heats, its resistance decreases to minimize steady-state power loss. If an overcurrent occurs, the PTC trips and limits the fault current until the condition clears and the device resets.

Working Principle: B59751C0120A070 Working Principle

The B59751C0120A070 PTC inrush current limiter uses a polycrystalline ceramic material with a high positive temperature coefficient. At power-on, the device is at ambient temperature with 50 Ohm resistance, limiting the peak inrush current drawn by downstream capacitors and rectifiers. As current flows, Joule heating raises the device temperature, causing resistance to decrease and minimizing steady-state power dissipation. If an overcurrent condition develops, the device temperature rises above the Curie point, causing a dramatic resistance increase that limits fault current. When the fault clears and the device cools, it returns to its low-resistance operating state automatically.

Pin Description: B59751C0120A070 Pin Definition and Functions
Pin Name Type Function
1 Lead 1 Input Connect to AC line or DC supply
2 Lead 2 Output Connect to load side
Application Scenarios: In which products and applications is B59751C0120A070 used
  • Consumer SMPS 230VAC input inrush current limiting
  • Home appliance power-on surge protection
  • LED driver startup current suppression
  • Industrial power supply pre-charge circuit
  • Frequency converter auxiliary supply protection
Alternative Models: What chips are recommended as replacements for B59751C0120A070
Manufacturer Part Number Package Notes
EPCOS/TDK B59751C0120A050 Radial leaded Lower voltage variant
EPCOS/TDK B59751C0130A070 Radial leaded Higher voltage variant
Ametherm SL32-50R010 Disk 50 Ohm NTC ICL alternative
Cantherm MS22-5005-B Disk 50 Ohm inrush limiter

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1