Opens in a new tab

LMR10510YMFX/NOPB

1A buck DC-DC, 3-5.5V in, 0.6-4.5V out, 3MHz, 30nA shutdown, SOT-23-5

7653

Effective Inventory

Image for reference only

Manufacturer Part:

LMR10510YMFX/NOPB

Package:

SOT-23-5 (2.9 × 1.6 × 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LMR10510YMFX/NOPB is a 5.5V input, 1A step-down DC-DC switching regulator from Texas Instruments, packaged in a 5-pin SOT-23 (DMF) package. The Y variant features a 3MHz switching frequency, enabling the use of extremely small external components. With an input range of 3V to 5.5V and adjustable output from 0.6V to 4.5V, it is ideal for space-constrained point-of-load conversion.

Key Specifications

Function Step-Down DC-DC Converter
Input Voltage 3V to 5.5V
Output Voltage 0.6V to 4.5V (adjustable)
Output Current 1A
Switching Frequency 3MHz
Internal MOSFET RDS(on) 130mΩ (PMOS)
Shutdown IQ 30nA (typical)
Package 5-pin SOT-23 (2.9 × 1.6 mm)
Operating Temperature -40°C to +125°C (TJ)

Features

  • 3MHz switching frequency for smallest solution size
  • Integrated 130mΩ PMOS switch for 1A output
  • Ultra-low 30nA shutdown quiescent current
  • Internal soft start to reduce inrush current
  • Current-mode PWM with internal compensation
  • Thermal shutdown and current limit protection

Applications

  • Point-of-load conversion from 3.3V/5V rails
  • Space-constrained portable devices
  • Battery-powered handheld instruments
  • Industrial distributed power architectures
  • USB-powered devices
Product Introduction: LMR10510YMFX/NOPB Product Introduction

The LMR10510 is a monolithic high-frequency PWM step-down DC-DC converter available in a tiny 5-pin SOT-23 or 6-pin WSON package. The Y variant switches at 3MHz, allowing the use of chip-scale inductors and capacitors for the smallest possible solution footprint. It provides up to 1A output current with an integrated 130mΩ PMOS switch, achieving efficiencies up to 93%. The device is internally compensated and requires minimal external components, simplifying design and reducing BOM cost. With 30nA shutdown current and internal soft start, it is ideal for battery-powered and space-constrained applications.

Working Principle: LMR10510YMFX/NOPB Working Principle

The LMR10510 employs a fixed-frequency current-mode PWM control architecture. At each clock cycle, the internal PMOS switch turns on, allowing current to flow through the external inductor. The inductor current is sensed and compared against the error amplifier output to determine the on-time. When the switch turns off, the inductor current flows through the external Schottky catch diode. The output voltage is sensed through the FB pin via a resistor divider and compared with the 0.6V internal reference by the error amplifier. The 3MHz switching frequency allows extremely small inductors (0.47-2.2μH) and capacitors while maintaining high efficiency. Current-mode control provides fast transient response and cycle-by-cycle current limiting for robust operation.

Pin Description: LMR10510YMFX/NOPB Pin Definition and Functions
Pin Name Type Function
1 SW Output Switch node — connect to inductor and catch diode
2 GND Power Signal and power ground
3 FB Input Feedback — connect resistor divider from output
4 EN Input Enable — logic high enables operation
5 VIN Power Input supply voltage (3-5.5V)
Application Scenarios: In which products and applications is LMR10510YMFX/NOPB used
  • 3.3V to 1.2V core voltage POL conversion in FPGAs
  • 5V to 3.3V regulation in USB-powered devices
  • Li-ion battery to 1.8V system rail conversion
  • Portable instrument distributed power architecture
  • Compact IoT device power supply
Alternative Models: What chips are recommended as replacements for LMR10510YMFX/NOPB
Manufacturer Part Number Package Notes
TI LMR10510XMFX/NOPB SOT-23-5 1.6MHz version (X suffix)
TI LMR62421 SOT-23-5 Similar buck, higher input
Monolithic Power MP2143 TSOT-23-5 1A buck, 1.5MHz
Richtek RT8059 WDFN-6 1A buck, 1.5MHz
Maxim MAX8986 WLP-9 1A buck, 4MHz

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1