Opens in a new tab

ISO3086TDWR

Isolated full-duplex RS-485 transceiver, 20Mbps, 2.5kVrms, 256 nodes, SOIC-16

4215

Effective Inventory

Image for reference only

Manufacturer Part:

ISO3086TDWR

Package:

SOIC-16 (10.3 × 7.5 × 2.35 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ISO3086TDWR is a 20Mbps, full-duplex, 2.5kVrms isolated RS-485/RS-422 transceiver from Texas Instruments, packaged in a 16-pin SOIC (DW) package. It provides galvanic isolation between the bus transceiver and logic-level interface, making it ideal for long transmission lines with high common-mode voltage ranges. The T suffix indicates the extended -40°C to +85°C industrial temperature range.

Key Specifications

Function Isolated Full-Duplex RS-485/RS-422 Transceiver
Duplex Full
Data Rate Up to 20 Mbps
Isolation Rating 2500V RMS (UL 1577)
Unit Load 1/8 (256 nodes per bus)
CMTI 50 kV/μs (typical)
Bus ESD 12 kV HBM (bus to GND2)
Package 16-pin SOIC (10.3 × 7.5 mm)
Operating Temperature -40°C to +85°C

Features

  • Full-duplex operation with independent driver and receiver
  • 2500V RMS isolation per UL 1577
  • 20 Mbps maximum signaling rate
  • 1/8 unit load supports up to 256 nodes on one bus
  • Fail-safe receiver for open, short, and idle bus conditions
  • 3.3V inputs are 5V tolerant; 12 kV HBM ESD on bus pins

Applications

  • Industrial automation and factory networks
  • Security and access control systems
  • Motor and motion control communication
  • HVAC and building automation
  • Chemical production process control
Product Introduction: ISO3086TDWR Product Introduction

The ISO3086 is an isolated full-duplex RS-485 and RS-422 transceiver designed for TIA/EIA-485 applications requiring galvanic isolation. The symmetrical isolation barrier is tested to provide 2500V RMS isolation for 60 seconds per UL 1577 between the bus transceiver and logic interface. With signaling rates up to 20 Mbps, 1/8 unit load for 256-node bus support, and fail-safe receiver design, the device is ideal for long transmission lines in harsh industrial environments. The T suffix variant operates over the -40°C to +85°C industrial temperature range.

Working Principle: ISO3086TDWR Working Principle

The ISO3086 integrates an RS-485/RS-422 differential driver and receiver with a galvanic isolation barrier. The logic side (VCC1) connects to the host controller, while the bus side (VCC2) connects to the RS-485 bus. The isolation barrier is constructed using a thick-film capacitive coupling technology that transmits signals across the barrier while blocking DC and low-frequency common-mode voltages. In full-duplex mode, the driver (D, DE pins) and receiver (R, RE pins) operate independently. The driver converts single-ended logic signals into differential bus signals, while the receiver converts differential bus signals back to single-ended logic. The fail-safe receiver ensures a logic-high output when the bus is open, shorted, or idle (all transmitters off).

Pin Description: ISO3086TDWR Pin Definition and Functions
Pin Name Type Function
1 VCC1 Power Logic side supply (5V)
2 DE Input Driver output enable — active high
3 RE Input Receiver output enable — active low
4 D Input Driver data input
5 R Output Receiver data output
6 GND1 Power Logic side ground
7 GND2 Power Bus side ground
8 VCC2 Power Bus side supply (5V)
9,10 Y,Z Output Driver differential outputs
11,12 A,B Input Receiver differential inputs
13-16 GND/NC — Ground / No connect
Application Scenarios: In which products and applications is ISO3086TDWR used
  • Isolated RS-485 communication in factory automation networks
  • Motor drive communication bus with ground loop isolation
  • Security camera RS-485 bus with ESD and surge protection
  • HVAC building automation network nodes
  • Chemical process control with intrinsic safety barriers
Alternative Models: What chips are recommended as replacements for ISO3086TDWR
Manufacturer Part Number Package Notes
TI ISO3082TDWR SOIC-16 Half-duplex version
TI ISO1452DR SOIC-16 Isolated RS-485, 500kbps
ADI ADM2587E SOIC-20 Isolated RS-485, integrated DC-DC
Maxim MAX14853 TSSOP-16 Isolated RS-485, 25Mbps
Silicon Labs Si8631 SOIC-16 Digital isolator + external transceiver

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1