Opens in a new tab

TLE2022IDR

Dual precision op-amp, 4-40V, 1.7MHz GBW, 0.6mV Vos, bipolar, SOIC-8

8560

Effective Inventory

Image for reference only

Manufacturer Part:

TLE2022IDR

Package:

SOIC-8 (4.9 × 3.9 × 1.45 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLE2022IDR is a dual high-speed, low-power, bipolar precision operational amplifier from Texas Instruments, packaged in an 8-pin SOIC (D) package. The I suffix indicates industrial temperature range (-40°C to +85°C). It combines excellent DC precision with an input common-mode range that includes the negative rail, making it ideal for single-supply low-level signal conditioning.

Key Specifications

Function Dual Precision Operational Amplifier
Channels 2
Supply Voltage 4V to 40V (single or dual)
Vos (max at 25°C) 0.6mV
Ib (max) 70nA
GBW 1.7MHz (typical)
Slew Rate 0.5V/μs (typical)
IQ per channel 200μA (typical)
Package SOIC-8 (4.9 × 3.9 mm)
Operating Temperature -40°C to +85°C

Features

  • High open-loop gain: 136dB typical
  • Low offset voltage: 100μV maximum (A grade)
  • Input common-mode range includes negative rail
  • Phase-reversal protection circuitry
  • Specified for both 5V single-supply and ±15V operation
  • Low supply current: 300μA maximum per channel

Applications

  • Low-level signal conditioning in single-supply systems
  • Precision instrumentation amplifiers
  • Transducer interface circuits
  • Medical monitoring equipment
  • Industrial process control
Product Introduction: TLE2022IDR Product Introduction

The TLE2022 is a dual precision operational amplifier using TI’s advanced complementary bipolar process with isolated vertical PNP transistors. This process dramatically improves unity-gain bandwidth and slew rate over similar devices while maintaining excellent DC precision. The I-suffix version is specified for the -40°C to +85°C industrial temperature range. The input common-mode voltage range includes the negative supply rail, enabling single-supply operation for low-level signal conditioning. Phase-reversal protection prevents unexpected output state changes when inputs are driven below the negative rail. The device is an excellent upgrade path from the OP21 in applications requiring higher speed.

Working Principle: TLE2022IDR Working Principle

The TLE2022 uses a complementary bipolar process featuring isolated vertical PNP transistors that significantly improve AC performance compared to conventional lateral PNP designs. The input stage is a differential pair with active load that provides high open-loop gain (136dB typical). A bias circuit ensures extreme parameter stability over time and temperature, maintaining precision performance throughout the device’s lifetime. The output stage includes short-circuit protection and can drive capacitive loads without oscillation in most configurations. The phase-reversal protection circuit prevents the output from unexpectedly changing state when the input voltage is driven below the negative supply rail, a common failure mode in conventional op-amps used in single-supply applications.

Pin Description: TLE2022IDR Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Channel 1 output
2 1IN- Input Channel 1 inverting input
3 1IN+ Input Channel 1 non-inverting input
4 VCC- Power Negative supply or GND (single supply)
5 2IN+ Input Channel 2 non-inverting input
6 2IN- Input Channel 2 inverting input
7 2OUT Output Channel 2 output
8 VCC+ Power Positive supply
Application Scenarios: In which products and applications is TLE2022IDR used
  • Single-supply precision signal conditioning for sensor interfaces
  • Medical ECG/EEG front-end amplifiers with negative-rail CM input
  • Industrial 4-20mA receiver circuits
  • Battery-powered precision measurement instruments
  • Transducer bridge amplifier with high CMRR requirements
Alternative Models: What chips are recommended as replacements for TLE2022IDR
Manufacturer Part Number Package Notes
TI TLE2022AIDR SOIC-8 A grade, lower Vos (0.24mV max)
TI OPA2227 SOIC-8 Low noise, higher precision
ADI OP2177 SOIC-8 Dual precision, low noise
Maxim MAX4126 SOIC-8 Dual low-noise precision op-amp
Microchip MCP6022 SOIC-8 Dual RRIO, 10MHz, low power

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1