Opens in a new tab

TS3DV520RHUR

1.65Gbps 5-ch differential HDMI/DVI 10:20 mux switch, 6Ω Ron, HDCP, 56-WQFN

6012

Effective Inventory

Image for reference only

Manufacturer Part:

TS3DV520RHUR

Package:

56-WQFN (3.5 × 9.0 × 0.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TS3DV520RHUR is a 1.65-Gbps 5-channel differential 10:20/20:10 multiplexer/demultiplexer switch from Texas Instruments, packaged in a 56-pin WQFN (RHU) package. It is designed for DVI 1.0 and HDMI 1.2a applications, supporting video resolutions up to 1080p. The device features low on-state resistance (6 Ω max), low crosstalk (-41 dB typical), and rail-to-rail signal handling on data I/O ports from 0V to 5V.

Key Specifications

Function 5-Channel Differential 10:20 Mux/Demux Switch
Signaling Rate 1.65 Gbps (2.4 Gbps bandwidth typ)
HDMI Standard HDMI 1.2a / DVI 1.0
Channels 5 differential
On-Resistance 6 Ω (max)
On-Capacitance 7.8 pF (typ)
Crosstalk -41 dB (typ)
Bit-to-Bit Skew 0.1 ns (max)
Supply Voltage 3.0V to 3.6V
I/O Voltage Range 0V to 5V (rail-to-rail)
Package 56-WQFN (3.5 × 9.0 mm)
Operating Temperature -40°C to +85°C

Features

  • Compatible with HDMI v1.2a (Type A) and DVI 1.0 high-speed digital interface
  • Supports all video formats up to 1080p and SXGA (1280 × 1024 at 75 Hz)
  • Low and flat on-state resistance: 6 Ω max, 0.5 Ω flatness typical
  • Low crosstalk: -41 dB typical between channels
  • HDCP compatible for content protection pass-through
  • Ioff support for partial-power-down mode operation

Applications

  • DVI/HDMI signal switching in HDTVs and displays
  • Audio/video receiver HDMI input multiplexing
  • 10/100/1000 Base-T signal switching
  • Hub and router signal routing
  • Laptop and docking station video port selection
Product Introduction: TS3DV520RHUR Product Introduction

The TS3DV520 is a 20-bit to 10-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input that controls the data path. The device provides five differential channels for digital video signal switching and is fully compatible with DVI 1.0 and HDMI 1.2a specifications. With low and flat on-state resistance (6 Ω max, 0.5 Ω flatness), low on-capacitance (7.8 pF), and high bandwidth (2.4 GHz typical), it preserves signal integrity in high-speed digital video applications. The device also supports HDCP content protection pass-through and includes Ioff circuitry for partial-power-down isolation.

Working Principle: TS3DV520RHUR Working Principle

The TS3DV520 operates as a passive FET switch matrix. When the SEL pin is set low, the 10-bit port A is connected to the 20-bit common port; when SEL is high, the 10-bit port B is connected to the common port. Each of the five differential channels consists of four single-ended switch paths (positive and negative for each direction). The NMOS/PMOS parallel pass transistor structure provides rail-to-rail signal handling from 0V to 5V on the data I/O pins, accommodating the TMDS DC balanced signaling used in DVI and HDMI. The low and flat Ron ensures minimal signal attenuation and distortion, while the low on-capacitance preserves the high-frequency edge rates required for 1.65 Gbps data rates. Ioff circuitry prevents damaging backflow current when the device is powered down.

Pin Description: TS3DV520RHUR Pin Definition and Functions
Pin Name Type Function
1-2 1A_CLK+/1A_CLK- I/O Port A channel 1 clock differential pair
3-8 1A_D0-D2+/D0-D2- I/O Port A channel 1 data differential pairs
9-14 2A_CLK/D0-D2 I/O Port A channel 2 differential pairs
15-20 3A-5A pairs I/O Port A channels 3-5 differential pairs
21-40 1B-5B pairs I/O Port B channels 1-5 differential pairs
41-42 COM_CLK+/COM_CLK- I/O Common port clock differential pair
43-50 COM_D0-D2 pairs I/O Common port data differential pairs
51 SEL Input Port select: 0=Port A, 1=Port B
52 OE Input Output enable (active low)
53 VCC Power 3.3V supply
54-55 GND Power Ground
56 NC — No connect
Application Scenarios: In which products and applications is TS3DV520RHUR used
  • HDMI input selection between two sources in HDTV flat-panel displays
  • Dual-DVI monitor KVM switch for workstation environments
  • Laptop docking station DisplayPort/HDMI port multiplexing
  • Audio/video receiver with multiple HDMI input switching
  • 1000 Base-T Ethernet PHY-to-RJ45 signal routing in network hubs
Alternative Models: What chips are recommended as replacements for TS3DV520RHUR
Manufacturer Part Number Package Notes
TI HD3SS215RHUR WQFN-42 2:1 HDMI 1.4 switch, 3.4Gbps
TI TS3DV642RHUR WQFN-42 6-channel HDMI 2.0 redriver switch
Pericom/PI PI3HDX621 WQFN-56 HDMI 2.0 2:1 mux with EQ
Analog Devices ADV7626 LQFP-144 HDMI transceiver with switching
NXP PTN3363 WQFN-40 HDMI level shifter/redriver

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1