Opens in a new tab

TLV5616IDGKR

12-bit voltage output DAC, SPI, 2.7–5.5 V, programmable speed/power, 8-VSSOP

2297

Effective Inventory

Image for reference only

Manufacturer Part:

TLV5616IDGKR

Package:

8-VSSOP (DGK) — 3.0 x 4.9 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLV5616IDGKR is a 12-bit voltage output digital-to-analog converter (DAC) from Texas Instruments. Packaged in an 8-pin VSSOP (DGK), it operates from 2.7 V to 5.5 V and features a flexible 4-wire serial interface compatible with SPI, QSPI, and Microwire. The DAC offers programmable settling time for speed versus power optimization and includes a power-down mode with 10 nA current consumption.

Key Specifications

Resolution 12-bit
Number of DAC Channels 1
Output Type Buffered Voltage (x2 gain)
Settling Time 3 µs (fast mode) / 9 µs (slow mode)
Interface SPI / QSPI / Microwire (4-wire)
Supply Voltage 2.7 V to 5.5 V
Package 8-VSSOP (DGK) — 3.0 x 4.9 mm
Operating Temperature -40°C to +85°C
Power Consumption 900 µW typ (slow mode at 3 V)

Features

  • Programmable settling time: 3 µs fast / 9 µs slow mode
  • Ultra-low power: 900 µW typical in slow mode at 3 V
  • 10 nA power-down mode for battery conservation
  • Buffered high-impedance reference input
  • Output range = 2x reference voltage with rail-to-rail output buffer
  • Compatible with TMS320, SPI, QSPI, and Microwire serial ports

Applications

  • Portable battery-powered instruments
  • Digital offset and gain adjustment
  • Process control and industrial automation
  • Programmable voltage sources
  • Automotive audio and infotainment
Product Introduction: TLV5616IDGKR Product Introduction

The TLV5616 is a 12-bit voltage output digital-to-analog converter from Texas Instruments with a flexible 4-wire serial interface. The 4-wire interface allows glueless connection to TMS320, SPI, QSPI, and Microwire serial ports. The device is programmed with a 16-bit serial string containing 4 control and 12 data bits. The resistor string output voltage is buffered by a x2 gain rail-to-rail output buffer featuring a Class AB output stage. The settling time is programmable to optimize speed versus power dissipation. A high-impedance buffer is integrated on the REFIN terminal to reduce the need for a low source impedance drive.

Working Principle: TLV5616IDGKR Working Principle

The TLV5616 converts a 12-bit digital word to an analog voltage through a resistor-string DAC architecture. The 16-bit serial input word (4 control bits + 12 data bits) is clocked via the SPI-compatible interface. The output voltage equals 2 x REFIN x (code / 4096), where REFIN is the external reference voltage. The programmable settling time mode is selected by control bits within the serial string: fast mode (3 µs) uses more power for higher speed, while slow mode (9 µs) minimizes power consumption. The Class AB output buffer provides rail-to-rail output swing with good drive capability.

Pin Description: TLV5616IDGKR Pin Definition and Functions
Pin Name Type Function
1 REFIN Input Analog reference voltage input (high-Z buffered)
2 OUT Output DAC voltage output (2x VREF)
3 GND Power Ground reference
4 CS Input Chip select (active low)
5 SPICLK Input Serial clock input
6 DIN Input Serial data input
7 VDD Power Positive supply voltage (2.7–5.5 V)
8 FS Input Frame sync input
Application Scenarios: In which products and applications is TLV5616IDGKR used
  • Programmable voltage sources in test and measurement equipment
  • Digital gain and offset calibration in sensor signal chains
  • Motor speed control reference voltage generation
  • Automotive audio volume and tone control
  • Industrial process control setpoint adjustment
Alternative Models: What chips are recommended as replacements for TLV5616IDGKR
Manufacturer Part Number Package Notes
TI TLV5618IDGKR 8-VSSOP Dual 12-bit DAC, same family
TI DAC7512E/2K5 8-VSSOP 12-bit DAC, SPI, similar spec
Microchip MCP4911T-E/CH 8-SOT-23 10-bit DAC, smaller package
Maxim MAX5302EUB 8-µMAX 12-bit DAC, SPI
Analog Devices AD5600BRJZ 8-SOT-23 8-bit DAC, smaller form factor

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1