Opens in a new tab

LMC6035IMX/NOPB

Dual CMOS op-amp, rail-to-rail output, 2.0-15.5V, 1.4MHz GBW, 20fA input current, SOIC-8

10879

Effective Inventory

Image for reference only

Manufacturer Part:

LMC6035IMX/NOPB

Package:

SOIC-8 (4.9 x 3.9 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LMC6035IMX/NOPB from Texas Instruments is a dual CMOS operational amplifier capable of rail-to-rail output swing into loads of 600 ohms. Operating from a single supply of 2.0 V to 15.5 V, it features ultra-low input current of 20 fA and a gain-bandwidth product of 1.4 MHz. Housed in an 8-pin SOIC package, it is specified for 2.7-V, 3-V, 5-V, and 15-V performance.

Key Specifications

Number of Channels 2
Supply Voltage Range 2.0 V to 15.5 V
GBW 1.4 MHz
Slew Rate 1.5 V/us
Input Bias Current 0.2 pA (max)
Input Offset Voltage 5 mV (max)
CMRR 96 dB (typ)
Operating Temperature -40 to 85 degC
Package SOIC-8 (4.9 x 3.9 mm)

Features

  • Ultra-low input current: 20 fA typical
  • Rail-to-rail output swing into 600-ohm loads
  • High voltage gain: 126 dB
  • Wide input common-mode voltage range
  • Low distortion: 0.01% at 10 kHz
  • Specified for 2.7 V, 3 V, 5 V, and 15 V operation

Applications

  • Portable and battery-powered electronics
  • Active filter applications
  • High-impedance buffer or preamplifier
  • Medical instrumentation
  • Automotive low-voltage systems
Product Introduction: LMC6035IMX/NOPB Product Introduction

The LMC6035IMX/NOPB is an economical, low-voltage dual CMOS operational amplifier from Texas Instruments capable of rail-to-rail output swing into loads of 600 ohms. It allows single-supply operation and is specified for 2.7-V, 3-V, 5-V, and 15-V supply voltage. The 2.7-V specification corresponds to the end-of-life voltage (0.9 V/cell) for three NiCd or NiMH batteries in series. The ultra-low input current of 20 fA makes it an excellent choice for low-power active-filter applications, as it allows the use of higher resistor values and lower capacitor values while maintaining circuit performance.

Working Principle: LMC6035IMX/NOPB Working Principle

The LMC6035 utilizes a CMOS input stage providing ultra-low input bias current (20 fA typical), which is critical for high-impedance sensor interfaces and active filter designs. The rail-to-rail output stage uses complementary PMOS and NMOS transistors in a totem-pole configuration that can swing within 200 mV of either supply rail at 600-ohm load. The internal compensation network ensures stability with a gain-bandwidth product of 1.4 MHz. The device architecture includes a high-gain differential input pair, voltage gain stages, and a class-AB output buffer capable of sourcing and sinking up to 5 mA continuously.

Pin Description: LMC6035IMX/NOPB Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Amplifier 1 output
2 1IN- Input Amplifier 1 inverting input
3 1IN+ Input Amplifier 1 non-inverting input
4 V- Power Negative supply / ground
5 2IN+ Input Amplifier 2 non-inverting input
6 2IN- Input Amplifier 2 inverting input
7 2OUT Output Amplifier 2 output
8 V+ Power Positive supply
Application Scenarios: In which products and applications is LMC6035IMX/NOPB used
  • Portable and battery-powered medical devices
  • Active filter circuits with high-impedance nodes
  • Photodiode and piezoelectric sensor preamplifiers
  • 3-cell NiCd/NiMH battery-operated systems
  • Automotive low-voltage signal conditioning
Alternative Models: What chips are recommended as replacements for LMC6035IMX/NOPB
Manufacturer Part Number Package Notes
TI LMC6035IMMX/NOPB VSSOP-8 Smaller package option
TI LMC6036IM/NOPB SOIC-14 Quad version
TI LMC6024IM/NOPB SOIC-14 Quad, lower speed
Microchip MCP607-I/SN SOIC-8 Dual, similar specs
TI TLV2462CDR SOIC-8 Dual, higher speed

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1