Opens in a new tab

SN65220DBVR

Dual USB TVS suppressor, 6V stand-off, 35pF cap, 15kV ESD, SOT-23-6

3911

Effective Inventory

Image for reference only

Manufacturer Part:

SN65220DBVR

Package:

SOT-23-6 (2.9 x 2.8 x 1.15 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN65220DBVR from Texas Instruments is a single universal serial bus (USB) port transient voltage suppressor designed to protect submicron 3-V or 5-V circuits from noise transients. Packaged in a 6-pin SOT-23, it provides ESD protection exceeding 15-kV human body model and features low capacitance of 35 pF typical, making it suitable for USB low- and full-speed port protection.

Key Specifications

Number of Lines Protected 2
Stand-off Voltage 6 V (min)
Breakdown Voltage 7 V
Capacitance 35 pF (typ)
Leakage Current 1 uA (max) at 6 V
ESD Rating (HBM) 15 kV
Operating Temperature -40 to 85 degC
Package SOT-23-6 (2.9 x 2.8 mm)

Features

  • ESD protection exceeds 15-kV HBM and 2-kV machine model
  • Low capacitance: 35 pF typical for USB signal integrity
  • Low leakage current: 1 uA maximum at 6 V
  • Stand-off voltage: 6 V minimum
  • Protects USB low- and full-speed ports
  • IEC 61000-4-2 system-level ESD compliance

Applications

  • USB port ESD protection
  • Portable electronics transient suppression
  • Computing peripherals input protection
  • Industrial USB interfaces
  • Consumer device cable interface protection
Product Introduction: SN65220DBVR Product Introduction

The SN65220DBVR from Texas Instruments is a dual unidirectional transient voltage suppressor (TVS) designed specifically for USB port ESD protection. It protects low- and full-speed USB transceivers and ASICs from electrical noise transients sourced through cabled I/O connections. The device features low input capacitance of 35 pF typical, which preserves USB signal integrity. The 15-kV HBM ESD rating provides robust protection against electrostatic discharge events, while the 6-V stand-off voltage and 1-uA maximum leakage current ensure compatibility with both 3-V and 5-V USB logic levels.

Working Principle: SN65220DBVR Working Principle

The SN65220DBVR operates as a bidirectional clamping device for two independent signal lines. Each channel consists of a steering diode network that diverts transient currents away from the protected IC and into the ground plane. Under normal operating conditions, the TVS presents high impedance and low capacitance (35 pF) to the signal line, preserving USB signal integrity. When a transient voltage exceeds the breakdown voltage (7 V), the device rapidly clamps the voltage and diverts the surge current to ground. The IEC 61000-4-2 compliance ensures protection against real-world ESD events at the system level.

Pin Description: SN65220DBVR Pin Definition and Functions
Pin Name Type Function
1 NC – No connect (internally floating)
2 GND Power Ground reference
3 NC – No connect (internally floating)
4 B Input Transient suppressor input – Line 2
5 GND Power Ground reference
6 A Input Transient suppressor input – Line 1
Application Scenarios: In which products and applications is SN65220DBVR used
  • USB port ESD protection in computers and peripherals
  • Portable consumer electronics cable interface protection
  • Industrial USB communication port transient suppression
  • Medical device USB input protection
  • Set-top box and gaming console USB interfaces
Alternative Models: What chips are recommended as replacements for SN65220DBVR
Manufacturer Part Number Package Notes
TI SN65240PWR TSSOP-8 Quad TVS, 4 channels
TI SN75240PWR TSSOP-8 Quad TVS, commercial temp
TI TPD2E001DRLR SOT-23-6 Low-capacitance USB ESD
onsemi NUP4202MRT1G SOT-23-6 Dual USB ESD protection
Nexperia IP4238CZ8 XSON-8 USB2.0 ESD protection

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1