Opens in a new tab

SN6505BDBVR

420kHz push-pull transformer driver, 2.25-5.5V, 1A drive, spread-spectrum, SOT-23-6

6744

Effective Inventory

Image for reference only

Manufacturer Part:

SN6505BDBVR

Package:

SOT-23-6 (2.9 x 2.8 x 1.15 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN6505BDBVR from Texas Instruments is a low-noise, low-EMI push-pull transformer driver designed for isolated power supplies. Operating from 2.25 V to 5.5 V with a 420-kHz internal oscillator, it delivers up to 1 A output drive current in a tiny 6-pin SOT-23 package. The device features spread-spectrum clocking, slew-rate control, and soft-start for ultra-low noise operation.

Key Specifications

Input Voltage Range 2.25 V to 5.5 V
Switching Frequency 420 kHz (typ)
Output Drive Current 1 A at 5 V
RDS(on) 0.25 ohm (max) at 4.5 V
Current Limit 1.7 A (typ)
Operating Temperature -55 to 125 degC
Package SOT-23-6 (2.9 x 2.8 mm)

Features

  • Push-pull driver for center-tapped transformers
  • Spread-spectrum clocking for ultra-low EMI
  • Slew-rate control on output switches
  • Soft-start reduces inrush current
  • External clock synchronization input
  • Thermal shutdown and undervoltage lockout

Applications

  • Isolated RS-485/RS-232/CAN power supplies
  • Medical equipment isolated power
  • Industrial automation isolated rails
  • Smart meter isolated DC-DC
  • EV charging station isolation
Product Introduction: SN6505BDBVR Product Introduction

The SN6505BDBVR from Texas Instruments is a low-noise, low-EMI push-pull transformer driver specifically designed for small isolated power supplies. It drives low-profile, center-tapped transformers from a 2.25-V to 5.5-V DC source. Ultra-low noise and EMI are achieved through slew-rate control of the output switch voltage and spread-spectrum clocking (SSC). The device integrates an oscillator followed by gate drive circuitry providing complementary output signals to drive ground-referenced N-channel power switches. Two internal 1-A power MOSFET switches ensure reliable startup under heavy load conditions.

Working Principle: SN6505BDBVR Working Principle

The SN6505BDBVR operates as a push-pull converter driver. The internal 420-kHz oscillator generates complementary gate drive signals for two internal N-channel MOSFET switches. Each MOSFET connects the transformer primary winding to ground alternately, creating an AC voltage across the primary. The center-tapped primary is connected to the input supply, and the MOSFETs drive each half-winding in turn. The secondary winding is rectified through diodes to produce the isolated output voltage. Spread-spectrum clocking dithers the switching frequency to reduce peak EMI emissions. Slew-rate control on the output transitions further reduces high-frequency harmonic content. Soft-start gradually increases the duty cycle during startup to limit inrush current.

Pin Description: SN6505BDBVR Pin Definition and Functions
Pin Name Type Function
1 D1 Output Switch output 1 (drain of MOSFET 1)
2 GND Power Ground
3 D2 Output Switch output 2 (drain of MOSFET 2)
4 VCC Power Input supply voltage
5 EN/CLK Input Enable (active high) / external clock input
6 GND Power Ground
Application Scenarios: In which products and applications is SN6505BDBVR used
  • Isolated power for RS-485, RS-232, and CAN bus transceivers
  • Medical device isolated power supplies
  • Industrial automation and process control isolated rails
  • Smart meter and energy measurement isolation
  • EV charging communication isolation power
Alternative Models: What chips are recommended as replacements for SN6505BDBVR
Manufacturer Part Number Package Notes
TI SN6505ADBVR SOT-23-6 160 kHz oscillator version
TI SN6505DDBVR SOT-23-6 2.1 MHz oscillator version
TI SN6501DBVR SOT-23-6 Lower cost, 350 kHz, no SSC
TI LM5050-1SD/NOPB SOT-23-6 OR-ing controller alternative
Maxim MAX253CSA+ SOIC-8 Similar transformer driver

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1