Opens in a new tab

Home » Integrated Circuits ICs, MOSFETs » PESD1IVN24-LSYL

PESD1IVN24-LSYL

24V bidirectional ESD protection diode, 42V clamp, DFN1006BD-2, AEC-Q101, CAN bus

10501

Effective Inventory

Image for reference only

Manufacturer Part:

PESD1IVN24-LSYL

Package:

DFN1006BD-2 (SOD882BD) – 1.0 x 0.6 x 0.47 mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The PESD1IVN24-LSYL is a bidirectional ESD protection diode manufactured by Nexperia, designed to protect automotive in-vehicle network bus lines from damage caused by electrostatic discharge and other transients. It features an ultra-small DFN1006BD-2 (SOD882BD) package with side-wettable flanks, 24V reverse standoff voltage, and AEC-Q101 automotive qualification.

Key Specifications

Reverse Standoff Voltage (VRWM) 24V (Max)
Breakdown Voltage (VBR) 25.5V (Min)
Clamping Voltage (VCL) 33V Typ / 42V Max @ 3.5A
Peak Pulse Current (IPPM) 3.5A (8/20µs)
Capacitance 14pF Typ @ 1MHz
Leakage Current < 1 nA (Typ)
ESD Protection ±30kV (IEC 61000-4-2)
Operating Temperature -55°C ~ 150°C
Package DFN1006BD-2 (1.0 x 0.6 x 0.47 mm)
Qualification AEC-Q101

Features

  • Ultra-small DFN1006BD-2 package (1.0 x 0.6 x 0.47 mm)
  • Bidirectional protection for CAN bus lines
  • Low clamping voltage: 33V typical at 3.5A
  • Ultra-low leakage current: < 1 nA typical
  • ESD protection up to ±30kV contact discharge
  • Side-wettable flanks for reliable solder joint inspection
  • AEC-Q101 qualified, automotive grade

Applications

  • CAN bus ESD protection in automotive
  • LIN bus protection
  • FlexRay network protection
  • SENT sensor interface protection
  • Automotive in-vehicle network lines
Product Introduction: PESD1IVN24-LSYL Product Introduction

The PESD1IVN24-LSYL is a Nexperia ESD protection device in a leadless ultra-small DFN1006BD-2 (SOD882BD) plastic package with side-wettable flanks. It is designed to protect automotive in-vehicle network bus lines from ESD and transient damage. The device provides 24V reverse standoff voltage with low 33V typical clamping voltage at 3.5A peak pulse current. Qualified to AEC-Q101, it is ideal for CAN, LIN, FlexRay, and SENT automotive network protection.

Working Principle: PESD1IVN24-LSYL Working Principle

The PESD1IVN24-LSYL operates as a bidirectional TVS (Transient Voltage Suppressor) diode. Under normal operating conditions (voltage below 24V), the device presents high impedance with sub-nanoampere leakage current and low capacitance (14pF), minimizing signal distortion on high-speed bus lines. When a transient voltage exceeds the breakdown voltage (25.5V min), the device rapidly avalanches, clamping the voltage to a safe level (33V typ at 3.5A) and diverting the transient energy away from the protected circuit. After the transient subsides, the device returns to its high-impedance state.

Pin Description: PESD1IVN24-LSYL Pin Definition and Functions
Pin Name Type Function
1 K1 Cathode Cathode of diode 1 – connect to bus line
2 K2 Cathode Cathode of diode 2 – connect to bus line or GND
Application Scenarios: In which products and applications is PESD1IVN24-LSYL used
  • CAN bus ESD and transient protection in automotive ECUs
  • LIN bus line protection in body electronics
  • FlexRay network protection in safety-critical systems
  • SENT sensor interface protection
  • General automotive in-vehicle network line protection
Alternative Models: What chips are recommended as replacements for PESD1IVN24-LSYL
Manufacturer Part Number Package Notes
Nexperia PESD1IVN24-LSY DFN1006BD-2 Non-automotive grade
NXP PESD2IVN24-LS SOT-23 Dual channel version
onsemi NUP2105LT1G SOT-23 CAN bus ESD protector
Texas Instruments TPD1E10B06DPYR 0402 ESD protection diode

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1