Opens in a new tab

820412711S9

Wire wound ferrite chip inductor, WLFW series, general purpose, low DCR, high Q

3560

Effective Inventory

Image for reference only

Manufacturer Part:

820412711S9

Package:

Surface Mount Chip Package

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 820412711S9 is a wire wound ferrite chip inductor from Walsin Technology, part of the WLFW/WFI series, designed for general-purpose applications requiring moderate inductance with low DCR and high Q factor. This inductor features a ferrite core construction in a compact surface-mount package, suitable for analog signal processing, LC filtering, EMI rejection, and noise suppression in a wide range of electronic circuits.

Key Specifications

Type Wire Wound Ferrite Inductor
Series WLFW / WFI
Core Material Ferrite
Construction Wire Wound, Unshielded
Operating Temperature -40°C ~ +125°C
Application General Purpose
Mounting Surface Mount
Manufacturer Walsin Technology

Features

  • Wire wound construction with lower DCR and higher Q
  • Ferrite core for effective EMI noise rejection
  • General-purpose inductor for broad application coverage
  • Standard chip size compatible with automated SMT assembly
  • RoHS compliant and lead-free

Applications

  • LC filter networks for signal conditioning
  • EMI rejection and noise suppression circuits
  • Analog signal processing and impedance matching
  • Power supply ripple filtering
  • Consumer electronics and communication equipment
Product Introduction: 820412711S9 Product Introduction

The 820412711S9 from Walsin Technology is a wire wound ferrite chip inductor in the WLFW/WFI series, designed for general-purpose electronic applications. Wire wound construction provides lower DC resistance and higher Q factor compared to multilayer alternatives, making it suitable for circuits requiring efficient energy storage and minimal resistive loss. The ferrite core material enables effective EMI noise rejection and suppression, while the compact surface-mount package supports automated PCB assembly. This inductor is widely used in LC filter networks, analog signal processing paths, and noise suppression circuits in consumer electronics and communication equipment.

Working Principle: 820412711S9 Working Principle

The 820412711S9 operates on the principle of electromagnetic induction. A fine copper wire is wound around a ferrite core, creating a coil with defined inductance. When current flows through the coil, a magnetic field is generated in the ferrite core, storing energy proportional to ½LI². The ferrite core concentrates the magnetic flux, increasing inductance per unit volume compared to air-core designs. The wire wound construction inherently provides lower DCR than multilayer inductors because the copper wire has higher conductivity than the internal electrodes used in multilayer construction. In LC filter applications, the inductor works with capacitors to create frequency-selective networks that pass desired signals while attenuating unwanted noise. In EMI suppression, the inductor’s impedance increases with frequency, blocking high-frequency noise from propagating through the circuit.

Pin Description: 820412711S9 Pin Definition and Functions
Pin Name Type Function
1 Terminal 1 Passive Inductor winding connection
2 Terminal 2 Passive Inductor winding connection

Note: Inductors are non-polarized devices. Either terminal can serve as either end of the winding.

Application Scenarios: In which products and applications is 820412711S9 used
  • LC low-pass and band-pass filter networks in signal conditioning paths
  • EMI noise suppression in power supply input/output lines
  • Impedance matching networks in RF and communication circuits
  • Choke inductors for ripple filtering in DC power rails
  • General-purpose energy storage in switching regulator circuits
Alternative Models: What chips are recommended as replacements for 820412711S9
Manufacturer Part Number Package Notes
Murata LQG18HN series 0603 Wire wound ferrite inductor
TDK MLF1608 series 0603 Multilayer ferrite inductor
Taiyo Yuden LB2012 series 0805 Wire wound ferrite inductor
Coilcraft LPS4018 series 1812 Wire wound shielded inductor
Bourns CM322522 series 1210 Wire wound ferrite inductor

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1