Opens in a new tab

LMH2110TM/NOPB

8GHz log RMS power detector, 45dB range, 50MHz-8GHz, 2.7-5V, DSBGA-6

3752

Effective Inventory

Image for reference only

Manufacturer Part:

LMH2110TM/NOPB

Package:

DSBGA-6 (YFQ) – 1.4 x 1.4 x 0.6 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LMH2110TM/NOPB is an 8 GHz logarithmic RMS power detector manufactured by Texas Instruments, featuring a 45 dB dynamic range in a tiny 6-bump DSBGA (YFQ) package. The device provides a temperature-insensitive output voltage that is linear-in-dB with respect to RF input power, making it particularly suited for accurate power measurement of modulated signals with high peak-to-average ratios such as W-CDMA and LTE.

Key Specifications

Detection Type Logarithmic RMS
Frequency Range 50 MHz to 8 GHz
Dynamic Range 45 dB typical
RF Input Power Range -40 dBm to +5 dBm
LOG Conformance Better than +/-0.5 dB
Supply Voltage 2.7V to 5.0V
Supply Current 4.8 mA (typical active)
Operating Temperature -40°C to +85°C
Package DSBGA-6 (1.4 x 1.4 mm)

Features

  • True RMS response ensures modulation-independent power measurement
  • 45 dB linear-in-dB detection range from -40 dBm to +5 dBm
  • Multi-band operation from 50 MHz to 8 GHz for versatile deployment
  • Highly temperature-insensitive output with +/-0.25 dB variation
  • Shutdown mode with high-impedance output to preserve filter capacitance

Applications

  • W-CDMA and LTE cellular transmit power control loops
  • RF power amplifier linearization feedback
  • Directional coupler-based power monitoring
  • Smartphone and data card transmit power measurement
  • General-purpose RF power detection in instrumentation
Product Introduction: LMH2110TM/NOPB Product Introduction

The LMH2110TM/NOPB from Texas Instruments is a 45 dB logarithmic RMS power detector that operates from 50 MHz to 8 GHz. Its RMS measurement topology inherently ensures modulation-insensitive power readings, making it ideal for W-CDMA, LTE, and other high-PAR signal environments. The device provides an output voltage linearly proportional to the RF input power in dBm, with excellent log conformance better than +/-0.5 dB and temperature stability of +/-0.25 dB. Operating from a single 2.7V to 5V supply and consuming only 4.8 mA typical, the LMH2110 is packaged in a tiny 6-bump DSBGA for space-constrained applications.

Working Principle: LMH2110TM/NOPB Working Principle

The LMH2110 uses a logarithmic RMS detection architecture consisting of a cascaded chain of limiting amplifier stages with rectifying detectors at each stage. The RF input signal is internally terminated with 50 ohms and amplified through the limiting chain. At each stage, the signal is partially rectified, and the combined rectified outputs produce a logarithmic (linear-in-dB) relationship between the output voltage and the RF input power. The RMS computation is performed by the integrated square-law detector and low-pass filter, ensuring that the output is proportional to the true RMS power regardless of the signal modulation. The enable (EN) pin controls shutdown mode, during which the output becomes high-impedance.

Pin Description: LMH2110TM/NOPB Pin Definition and Functions
Pin Name Type Function
A1 VDD Power Positive supply voltage (2.7V to 5V)
A2 OUT Output Ground-referenced detector output voltage
B1 RFIN RF Input RF input signal, internally terminated 50 ohms
B2 GND Ground Power ground (may be left floating if not feasible)
C1 GND Ground Power ground
C2 EN Input Enable: High=active, Low=shutdown
Application Scenarios: In which products and applications is LMH2110TM/NOPB used
  • LTE and W-CDMA transmit power control loops in cellular base stations and handsets
  • RF power amplifier linearization and predistortion feedback paths
  • Directional coupler-based VSWR and reflected power monitoring
  • RF instrumentation and spectrum analyzer power measurement stages
  • IoT gateway transmit power calibration and regulatory compliance
Alternative Models: What chips are recommended as replacements for LMH2110TM/NOPB
Manufacturer Part Number Package Notes
ADI AD8318 LFCSP-16 8GHz log detector, 60dB range
ADI AD8367 TSSOP-16 2.5GHz RMS detector, variable gain
Maxim MAX2016 TQFN-20 2.5GHz log detector/controller
TI LMV221 DSBGA-6 2.5GHz RMS power detector
NXP BGA2818 QFN DC-3GHz RMS detector

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1